[GIT PULL] at91: fixes for 3.14 #1

[GIT PULL] at91: fixes for 3.14 #1

[Nicolas Ferre]

Arnd, Olof, Kevin,

This is a first "fixes" series for AT91 on 3.14.
The content is only DT-related and quite boring.
I took the opportunity of this early "fixes" pull-request to collect
some Documentation patches that were lying around and I guess that
they can be merged by arm-soc nicely (addition of CCF to 2 drivers).
A new board is added to the lot because it is dead simple and integrates
well with the new sama5d36 SoC that we added earlier in this development cycle.

Thanks, best regards,

The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:

  Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)

are available in the git repository at:

  git://github.com/at91linux/linux-at91.git tags/at91-fixes

for you to fetch changes up to b7c2b6157079811586180d13c44a1095b57c2d47:

  ARM: at91: add Atmel's SAMA5D3 Xplained board (2014-02-07 17:20:39 +0100)

----------------------------------------------------------------
First series of AT91 fixes for 3.14.
All of them are DT-related.
- fixes for typos in i2c and ohci clocks
- addition of a USB host node for at91sam9n12ek
- 2 DT documentation updates that have been sent a long time ago
- a new board based on the sama5d36 SoC

----------------------------------------------------------------
Bo Shen (1):
      ARM: at91: enable USB host on at91sam9n12ek board

Boris BREZILLON (3):
      ARM: at91/dt: fix sama5d3 ohci hclk clock reference
      mmc: atmel-mci: document clock properties
      spi/atmel: document clock properties

Jean-Jacques Hiblot (1):
      ARM: at91/dt: sam9263: fix compatibility string for the I2C

Nicolas Ferre (1):
      ARM: at91: add Atmel's SAMA5D3 Xplained board

 .../devicetree/bindings/mmc/atmel-hsmci.txt        |   5 +
 .../devicetree/bindings/spi/spi_atmel.txt          |   5 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/at91-sama5d3_xplained.dts        | 229 +++++++++++++++++++++
 arch/arm/boot/dts/at91sam9263.dtsi                 |   2 +-
 arch/arm/boot/dts/at91sam9n12ek.dts                |   4 +
 arch/arm/boot/dts/sama5d3.dtsi                     |   2 +-
 7 files changed, 246 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/at91-sama5d3_xplained.dts

-- 
Nicolas Ferre

[GIT PULL] at91: fixes for 3.14 #1

[Jean-Christophe PLAGNIOL-VILLARD]

On 17:36 Fri 07 Feb     , Nicolas Ferre wrote:
> Arnd, Olof, Kevin,
> 
> This is a first "fixes" series for AT91 on 3.14.
> The content is only DT-related and quite boring.
> I took the opportunity of this early "fixes" pull-request to collect
> some Documentation patches that were lying around and I guess that
> they can be merged by arm-soc nicely (addition of CCF to 2 drivers).
> A new board is added to the lot because it is dead simple and integrates
> well with the new sama5d36 SoC that we added earlier in this development cycle.
> 
> Thanks, best regards,
> 
> The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
> 
>   Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
> 
> are available in the git repository at:
> 
>   git://github.com/at91linux/linux-at91.git tags/at91-fixes
> 
> for you to fetch changes up to b7c2b6157079811586180d13c44a1095b57c2d47:
> 
>   ARM: at91: add Atmel's SAMA5D3 Xplained board (2014-02-07 17:20:39 +0100)
> 
> ----------------------------------------------------------------
> First series of AT91 fixes for 3.14.
> All of them are DT-related.
> - fixes for typos in i2c and ohci clocks
> - addition of a USB host node for at91sam9n12ek
> - 2 DT documentation updates that have been sent a long time ago
> - a new board based on the sama5d36 SoC
> 
> ----------------------------------------------------------------
> Bo Shen (1):
>       ARM: at91: enable USB host on at91sam9n12ek board
> 
> Boris BREZILLON (3):
>       ARM: at91/dt: fix sama5d3 ohci hclk clock reference
>       mmc: atmel-mci: document clock properties
>       spi/atmel: document clock properties
> 
> Jean-Jacques Hiblot (1):
>       ARM: at91/dt: sam9263: fix compatibility string for the I2C
> 
> Nicolas Ferre (1):
>       ARM: at91: add Atmel's SAMA5D3 Xplained board

still comment on it please drop it on the PULL

Best Regards,
J.
> 
>  .../devicetree/bindings/mmc/atmel-hsmci.txt        |   5 +
>  .../devicetree/bindings/spi/spi_atmel.txt          |   5 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/at91-sama5d3_xplained.dts        | 229 +++++++++++++++++++++
>  arch/arm/boot/dts/at91sam9263.dtsi                 |   2 +-
>  arch/arm/boot/dts/at91sam9n12ek.dts                |   4 +
>  arch/arm/boot/dts/sama5d3.dtsi                     |   2 +-
>  7 files changed, 246 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/boot/dts/at91-sama5d3_xplained.dts
> 
> -- 
> Nicolas Ferre

[GIT PULL] at91: fixes for 3.14 #1

[Nicolas Ferre]

On 07/02/2014 18:20, Jean-Christophe PLAGNIOL-VILLARD :
> On 17:36 Fri 07 Feb     , Nicolas Ferre wrote:
>> Arnd, Olof, Kevin,
>>
>> This is a first "fixes" series for AT91 on 3.14.
>> The content is only DT-related and quite boring.
>> I took the opportunity of this early "fixes" pull-request to collect
>> some Documentation patches that were lying around and I guess that
>> they can be merged by arm-soc nicely (addition of CCF to 2 drivers).
>> A new board is added to the lot because it is dead simple and integrates
>> well with the new sama5d36 SoC that we added earlier in this development cycle.
>>
>> Thanks, best regards,
>>
>> The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
>>
>>   Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
>>
>> are available in the git repository at:
>>
>>   git://github.com/at91linux/linux-at91.git tags/at91-fixes
>>
>> for you to fetch changes up to b7c2b6157079811586180d13c44a1095b57c2d47:
>>
>>   ARM: at91: add Atmel's SAMA5D3 Xplained board (2014-02-07 17:20:39 +0100)
>>
>> ----------------------------------------------------------------
>> First series of AT91 fixes for 3.14.
>> All of them are DT-related.
>> - fixes for typos in i2c and ohci clocks
>> - addition of a USB host node for at91sam9n12ek
>> - 2 DT documentation updates that have been sent a long time ago
>> - a new board based on the sama5d36 SoC
>>
>> ----------------------------------------------------------------
>> Bo Shen (1):
>>       ARM: at91: enable USB host on at91sam9n12ek board
>>
>> Boris BREZILLON (3):
>>       ARM: at91/dt: fix sama5d3 ohci hclk clock reference
>>       mmc: atmel-mci: document clock properties
>>       spi/atmel: document clock properties
>>
>> Jean-Jacques Hiblot (1):
>>       ARM: at91/dt: sam9263: fix compatibility string for the I2C
>>
>> Nicolas Ferre (1):
>>       ARM: at91: add Atmel's SAMA5D3 Xplained board
> 
> still comment on it please drop it on the PULL

No, please don't.

I wrote this pull-request after having considered Jean-Christophe's
comments and having corrected my initial DTS file.
The comments that Jean-Christophe made in addition to the patch included
in this pull-request are just his point of view that I don't share (and
I've just answered his email BTW).

Jean-Christophe, I tend to ask for code inclusion when I am sure that
the content is ready and don't build a pull-request lightly. So please
do not add fuzziness to the AT91 maintenance process.

That said, I do not plan to put pressure on anybody. I just thought that
this board was simple enough so that it can seamlessly integrate 3.14...

Bye,

>>  .../devicetree/bindings/mmc/atmel-hsmci.txt        |   5 +
>>  .../devicetree/bindings/spi/spi_atmel.txt          |   5 +
>>  arch/arm/boot/dts/Makefile                         |   1 +
>>  arch/arm/boot/dts/at91-sama5d3_xplained.dts        | 229 +++++++++++++++++++++
>>  arch/arm/boot/dts/at91sam9263.dtsi                 |   2 +-
>>  arch/arm/boot/dts/at91sam9n12ek.dts                |   4 +
>>  arch/arm/boot/dts/sama5d3.dtsi                     |   2 +-
>>  7 files changed, 246 insertions(+), 2 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/at91-sama5d3_xplained.dts
>>
>> -- 
>> Nicolas Ferre
> 


-- 
Nicolas Ferre

[GIT PULL] at91: fixes for 3.14 #1

[Kevin Hilman]

Nicolas Ferre <nicolas.ferre@atmel.com> writes:

> Arnd, Olof, Kevin,
>
> This is a first "fixes" series for AT91 on 3.14.
> The content is only DT-related and quite boring.
> I took the opportunity of this early "fixes" pull-request to collect
> some Documentation patches that were lying around and I guess that
> they can be merged by arm-soc nicely (addition of CCF to 2 drivers).
> A new board is added to the lot because it is dead simple and integrates
> well with the new sama5d36 SoC that we added earlier in this development cycle.
>
> Thanks, best regards,
>
> The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
>
>   Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
>
> are available in the git repository at:
>
>   git://github.com/at91linux/linux-at91.git tags/at91-fixes
>
> for you to fetch changes up to b7c2b6157079811586180d13c44a1095b57c2d47:
>
>   ARM: at91: add Atmel's SAMA5D3 Xplained board (2014-02-07 17:20:39 +0100)
>
> ----------------------------------------------------------------
> First series of AT91 fixes for 3.14.
> All of them are DT-related.
> - fixes for typos in i2c and ohci clocks
> - addition of a USB host node for at91sam9n12ek
> - 2 DT documentation updates that have been sent a long time ago
> - a new board based on the sama5d36 SoC
>
> ----------------------------------------------------------------

Pulled into fixes,

Thanks,

Kevin