* [PATCH 1/2] USB: at91: fix the number of endpoint parameter
@ 2014-01-17 2:59 Bo Shen
2014-01-17 2:59 ` [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels Bo Shen
` (2 more replies)
0 siblings, 3 replies; 14+ messages in thread
From: Bo Shen @ 2014-01-17 2:59 UTC (permalink / raw)
To: linux-arm-kernel
In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS
is only 7. So, fix it for sama5d3 SoC using the udc->num_ep.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
drivers/usb/gadget/atmel_usba_udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 2cb52e0..7e67a81 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
if (ep_status) {
int i;
- for (i = 0; i < USBA_NR_ENDPOINTS; i++)
+ for (i = 0; i < udc->num_ep; i++)
if (ep_status & (1 << i)) {
if (ep_is_control(&udc->usba_ep[i]))
usba_control_irq(udc, &udc->usba_ep[i]);
--
1.8.5.2
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels 2014-01-17 2:59 [PATCH 1/2] USB: at91: fix the number of endpoint parameter Bo Shen @ 2014-01-17 2:59 ` Bo Shen 2014-01-17 9:29 ` Nicolas Ferre 2014-02-18 16:19 ` Felipe Balbi 2014-01-17 9:29 ` [PATCH 1/2] USB: at91: fix the number of endpoint parameter Nicolas Ferre 2014-01-18 5:20 ` Jean-Christophe PLAGNIOL-VILLARD 2 siblings, 2 replies; 14+ messages in thread From: Bo Shen @ 2014-01-17 2:59 UTC (permalink / raw) To: linux-arm-kernel When the SoC is earlier than sama5d3 SoC, which have the same number endpoints and DMAs. However for sama5d3 SoC, it has different number for endpoints and DMAs. So, define USBA_NR_DMAs for DMA channels Signed-off-by: Bo Shen <voice.shen@atmel.com> --- drivers/usb/gadget/atmel_usba_udc.c | 2 +- drivers/usb/gadget/atmel_usba_udc.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 7e67a81..5cded1c 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (dma_status) { int i; - for (i = 1; i < USBA_NR_ENDPOINTS; i++) + for (i = 1; i < USBA_NR_DMAS; i++) if (dma_status & (1 << i)) usba_dma_irq(udc, &udc->usba_ep[i]); } diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index 2922db5..a70706e 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -210,7 +210,7 @@ #define USBA_FIFO_BASE(x) ((x) << 16) /* Synth parameters */ -#define USBA_NR_ENDPOINTS 7 +#define USBA_NR_DMAS 7 #define EP0_FIFO_SIZE 64 #define EP0_EPT_SIZE USBA_EPT_SIZE_64 -- 1.8.5.2 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels 2014-01-17 2:59 ` [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels Bo Shen @ 2014-01-17 9:29 ` Nicolas Ferre 2014-02-18 16:19 ` Felipe Balbi 1 sibling, 0 replies; 14+ messages in thread From: Nicolas Ferre @ 2014-01-17 9:29 UTC (permalink / raw) To: linux-arm-kernel On 17/01/2014 03:59, Bo Shen : > When the SoC is earlier than sama5d3 SoC, which have the same number > endpoints and DMAs. However for sama5d3 SoC, it has different number > for endpoints and DMAs. So, define USBA_NR_DMAs for DMA channels > > Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > > drivers/usb/gadget/atmel_usba_udc.c | 2 +- > drivers/usb/gadget/atmel_usba_udc.h | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c > index 7e67a81..5cded1c 100644 > --- a/drivers/usb/gadget/atmel_usba_udc.c > +++ b/drivers/usb/gadget/atmel_usba_udc.c > @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) > if (dma_status) { > int i; > > - for (i = 1; i < USBA_NR_ENDPOINTS; i++) > + for (i = 1; i < USBA_NR_DMAS; i++) > if (dma_status & (1 << i)) > usba_dma_irq(udc, &udc->usba_ep[i]); > } > diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h > index 2922db5..a70706e 100644 > --- a/drivers/usb/gadget/atmel_usba_udc.h > +++ b/drivers/usb/gadget/atmel_usba_udc.h > @@ -210,7 +210,7 @@ > #define USBA_FIFO_BASE(x) ((x) << 16) > > /* Synth parameters */ > -#define USBA_NR_ENDPOINTS 7 > +#define USBA_NR_DMAS 7 > > #define EP0_FIFO_SIZE 64 > #define EP0_EPT_SIZE USBA_EPT_SIZE_64 > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels 2014-01-17 2:59 ` [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels Bo Shen 2014-01-17 9:29 ` Nicolas Ferre @ 2014-02-18 16:19 ` Felipe Balbi 2014-02-19 1:14 ` Bo Shen 1 sibling, 1 reply; 14+ messages in thread From: Felipe Balbi @ 2014-02-18 16:19 UTC (permalink / raw) To: linux-arm-kernel On Fri, Jan 17, 2014 at 10:59:25AM +0800, Bo Shen wrote: > When the SoC is earlier than sama5d3 SoC, which have the same number > endpoints and DMAs. However for sama5d3 SoC, it has different number > for endpoints and DMAs. So, define USBA_NR_DMAs for DMA channels > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > > drivers/usb/gadget/atmel_usba_udc.c | 2 +- > drivers/usb/gadget/atmel_usba_udc.h | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c > index 7e67a81..5cded1c 100644 > --- a/drivers/usb/gadget/atmel_usba_udc.c > +++ b/drivers/usb/gadget/atmel_usba_udc.c > @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) > if (dma_status) { > int i; > > - for (i = 1; i < USBA_NR_ENDPOINTS; i++) > + for (i = 1; i < USBA_NR_DMAS; i++) > if (dma_status & (1 << i)) > usba_dma_irq(udc, &udc->usba_ep[i]); > } > diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h > index 2922db5..a70706e 100644 > --- a/drivers/usb/gadget/atmel_usba_udc.h > +++ b/drivers/usb/gadget/atmel_usba_udc.h > @@ -210,7 +210,7 @@ > #define USBA_FIFO_BASE(x) ((x) << 16) > > /* Synth parameters */ > -#define USBA_NR_ENDPOINTS 7 > +#define USBA_NR_DMAS 7 what's the difference ? You just renamed this macro. Also, please clarify a bit your commit log. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140218/32376893/attachment.sig> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels 2014-02-18 16:19 ` Felipe Balbi @ 2014-02-19 1:14 ` Bo Shen 2014-02-19 1:22 ` Felipe Balbi 0 siblings, 1 reply; 14+ messages in thread From: Bo Shen @ 2014-02-19 1:14 UTC (permalink / raw) To: linux-arm-kernel Hi Felipe Balbi, On 02/19/2014 12:19 AM, Felipe Balbi wrote: > On Fri, Jan 17, 2014 at 10:59:25AM +0800, Bo Shen wrote: >> When the SoC is earlier than sama5d3 SoC, which have the same number >> endpoints and DMAs. However for sama5d3 SoC, it has different number >> for endpoints and DMAs. So, define USBA_NR_DMAs for DMA channels >> >> Signed-off-by: Bo Shen <voice.shen@atmel.com> >> --- >> >> drivers/usb/gadget/atmel_usba_udc.c | 2 +- >> drivers/usb/gadget/atmel_usba_udc.h | 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c >> index 7e67a81..5cded1c 100644 >> --- a/drivers/usb/gadget/atmel_usba_udc.c >> +++ b/drivers/usb/gadget/atmel_usba_udc.c >> @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) >> if (dma_status) { >> int i; >> >> - for (i = 1; i < USBA_NR_ENDPOINTS; i++) >> + for (i = 1; i < USBA_NR_DMAS; i++) >> if (dma_status & (1 << i)) >> usba_dma_irq(udc, &udc->usba_ep[i]); >> } >> diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h >> index 2922db5..a70706e 100644 >> --- a/drivers/usb/gadget/atmel_usba_udc.h >> +++ b/drivers/usb/gadget/atmel_usba_udc.h >> @@ -210,7 +210,7 @@ >> #define USBA_FIFO_BASE(x) ((x) << 16) >> >> /* Synth parameters */ >> -#define USBA_NR_ENDPOINTS 7 >> +#define USBA_NR_DMAS 7 > > what's the difference ? You just renamed this macro. Also, please > clarify a bit your commit log. As commit message said, the SoC before sama5d3, the endpoint number is the same as DMA channel number, so use endpoints definition for DMA channel number, however after sama5d3, the endpoints is not the same as DMA channel, so use DMA micro for DMA channels. Best Regards, Bo Shen ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels 2014-02-19 1:14 ` Bo Shen @ 2014-02-19 1:22 ` Felipe Balbi 2014-02-19 1:46 ` Bo Shen 0 siblings, 1 reply; 14+ messages in thread From: Felipe Balbi @ 2014-02-19 1:22 UTC (permalink / raw) To: linux-arm-kernel On Wed, Feb 19, 2014 at 09:14:58AM +0800, Bo Shen wrote: > Hi Felipe Balbi, > > On 02/19/2014 12:19 AM, Felipe Balbi wrote: > >On Fri, Jan 17, 2014 at 10:59:25AM +0800, Bo Shen wrote: > >>When the SoC is earlier than sama5d3 SoC, which have the same number > >>endpoints and DMAs. However for sama5d3 SoC, it has different number > >>for endpoints and DMAs. So, define USBA_NR_DMAs for DMA channels > >> > >>Signed-off-by: Bo Shen <voice.shen@atmel.com> > >>--- > >> > >> drivers/usb/gadget/atmel_usba_udc.c | 2 +- > >> drivers/usb/gadget/atmel_usba_udc.h | 2 +- > >> 2 files changed, 2 insertions(+), 2 deletions(-) > >> > >>diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c > >>index 7e67a81..5cded1c 100644 > >>--- a/drivers/usb/gadget/atmel_usba_udc.c > >>+++ b/drivers/usb/gadget/atmel_usba_udc.c > >>@@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) > >> if (dma_status) { > >> int i; > >> > >>- for (i = 1; i < USBA_NR_ENDPOINTS; i++) > >>+ for (i = 1; i < USBA_NR_DMAS; i++) > >> if (dma_status & (1 << i)) > >> usba_dma_irq(udc, &udc->usba_ep[i]); > >> } > >>diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h > >>index 2922db5..a70706e 100644 > >>--- a/drivers/usb/gadget/atmel_usba_udc.h > >>+++ b/drivers/usb/gadget/atmel_usba_udc.h > >>@@ -210,7 +210,7 @@ > >> #define USBA_FIFO_BASE(x) ((x) << 16) > >> > >> /* Synth parameters */ > >>-#define USBA_NR_ENDPOINTS 7 > >>+#define USBA_NR_DMAS 7 > > > >what's the difference ? You just renamed this macro. Also, please > >clarify a bit your commit log. > > As commit message said, the SoC before sama5d3, the endpoint number > is the same as DMA channel number, so use endpoints definition for > DMA channel number, however after sama5d3, the endpoints is not the > same as DMA channel, so use DMA micro for DMA channels. which means you're just renaming the macro for the sake of clarity. That's fine, just needs to be clearer in commit message. -- balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140218/995235a1/attachment-0001.sig> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels 2014-02-19 1:22 ` Felipe Balbi @ 2014-02-19 1:46 ` Bo Shen 0 siblings, 0 replies; 14+ messages in thread From: Bo Shen @ 2014-02-19 1:46 UTC (permalink / raw) To: linux-arm-kernel On 02/19/2014 09:22 AM, Felipe Balbi wrote: > On Wed, Feb 19, 2014 at 09:14:58AM +0800, Bo Shen wrote: >> Hi Felipe Balbi, >> >> On 02/19/2014 12:19 AM, Felipe Balbi wrote: >>> On Fri, Jan 17, 2014 at 10:59:25AM +0800, Bo Shen wrote: >>>> When the SoC is earlier than sama5d3 SoC, which have the same number >>>> endpoints and DMAs. However for sama5d3 SoC, it has different number >>>> for endpoints and DMAs. So, define USBA_NR_DMAs for DMA channels >>>> >>>> Signed-off-by: Bo Shen <voice.shen@atmel.com> >>>> --- >>>> >>>> drivers/usb/gadget/atmel_usba_udc.c | 2 +- >>>> drivers/usb/gadget/atmel_usba_udc.h | 2 +- >>>> 2 files changed, 2 insertions(+), 2 deletions(-) >>>> >>>> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c >>>> index 7e67a81..5cded1c 100644 >>>> --- a/drivers/usb/gadget/atmel_usba_udc.c >>>> +++ b/drivers/usb/gadget/atmel_usba_udc.c >>>> @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) >>>> if (dma_status) { >>>> int i; >>>> >>>> - for (i = 1; i < USBA_NR_ENDPOINTS; i++) >>>> + for (i = 1; i < USBA_NR_DMAS; i++) >>>> if (dma_status & (1 << i)) >>>> usba_dma_irq(udc, &udc->usba_ep[i]); >>>> } >>>> diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h >>>> index 2922db5..a70706e 100644 >>>> --- a/drivers/usb/gadget/atmel_usba_udc.h >>>> +++ b/drivers/usb/gadget/atmel_usba_udc.h >>>> @@ -210,7 +210,7 @@ >>>> #define USBA_FIFO_BASE(x) ((x) << 16) >>>> >>>> /* Synth parameters */ >>>> -#define USBA_NR_ENDPOINTS 7 >>>> +#define USBA_NR_DMAS 7 >>> >>> what's the difference ? You just renamed this macro. Also, please >>> clarify a bit your commit log. >> >> As commit message said, the SoC before sama5d3, the endpoint number >> is the same as DMA channel number, so use endpoints definition for >> DMA channel number, however after sama5d3, the endpoints is not the >> same as DMA channel, so use DMA micro for DMA channels. > > which means you're just renaming the macro for the sake of clarity. > That's fine, just needs to be clearer in commit message. Thanks, I will send v2 to make the commit message more clearer. Best Regards, Bo Shen ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] USB: at91: fix the number of endpoint parameter 2014-01-17 2:59 [PATCH 1/2] USB: at91: fix the number of endpoint parameter Bo Shen 2014-01-17 2:59 ` [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels Bo Shen @ 2014-01-17 9:29 ` Nicolas Ferre 2014-01-18 5:20 ` Jean-Christophe PLAGNIOL-VILLARD 2 siblings, 0 replies; 14+ messages in thread From: Nicolas Ferre @ 2014-01-17 9:29 UTC (permalink / raw) To: linux-arm-kernel On 17/01/2014 03:59, Bo Shen : > In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS > is only 7. So, fix it for sama5d3 SoC using the udc->num_ep. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > > drivers/usb/gadget/atmel_usba_udc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c > index 2cb52e0..7e67a81 100644 > --- a/drivers/usb/gadget/atmel_usba_udc.c > +++ b/drivers/usb/gadget/atmel_usba_udc.c > @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) > if (ep_status) { > int i; > > - for (i = 0; i < USBA_NR_ENDPOINTS; i++) > + for (i = 0; i < udc->num_ep; i++) > if (ep_status & (1 << i)) { > if (ep_is_control(&udc->usba_ep[i])) > usba_control_irq(udc, &udc->usba_ep[i]); > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] USB: at91: fix the number of endpoint parameter 2014-01-17 2:59 [PATCH 1/2] USB: at91: fix the number of endpoint parameter Bo Shen 2014-01-17 2:59 ` [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels Bo Shen 2014-01-17 9:29 ` [PATCH 1/2] USB: at91: fix the number of endpoint parameter Nicolas Ferre @ 2014-01-18 5:20 ` Jean-Christophe PLAGNIOL-VILLARD 2014-01-20 3:39 ` Bo Shen 2 siblings, 1 reply; 14+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2014-01-18 5:20 UTC (permalink / raw) To: linux-arm-kernel On 10:59 Fri 17 Jan , Bo Shen wrote: > In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS > is only 7. So, fix it for sama5d3 SoC using the udc->num_ep. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > > drivers/usb/gadget/atmel_usba_udc.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c > index 2cb52e0..7e67a81 100644 > --- a/drivers/usb/gadget/atmel_usba_udc.c > +++ b/drivers/usb/gadget/atmel_usba_udc.c > @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) > if (ep_status) { > int i; > > - for (i = 0; i < USBA_NR_ENDPOINTS; i++) > + for (i = 0; i < udc->num_ep; i++) no the limit need to specified in the driver as a checkpoint by the compatible or platform driver id Best Regards, J. > if (ep_status & (1 << i)) { > if (ep_is_control(&udc->usba_ep[i])) > usba_control_irq(udc, &udc->usba_ep[i]); > -- > 1.8.5.2 > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] USB: at91: fix the number of endpoint parameter 2014-01-18 5:20 ` Jean-Christophe PLAGNIOL-VILLARD @ 2014-01-20 3:39 ` Bo Shen 2014-01-21 5:49 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 1 reply; 14+ messages in thread From: Bo Shen @ 2014-01-20 3:39 UTC (permalink / raw) To: linux-arm-kernel Hi J, On 01/18/2014 01:20 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 10:59 Fri 17 Jan , Bo Shen wrote: >> In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS >> is only 7. So, fix it for sama5d3 SoC using the udc->num_ep. >> >> Signed-off-by: Bo Shen <voice.shen@atmel.com> >> --- >> >> drivers/usb/gadget/atmel_usba_udc.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c >> index 2cb52e0..7e67a81 100644 >> --- a/drivers/usb/gadget/atmel_usba_udc.c >> +++ b/drivers/usb/gadget/atmel_usba_udc.c >> @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) >> if (ep_status) { >> int i; >> >> - for (i = 0; i < USBA_NR_ENDPOINTS; i++) >> + for (i = 0; i < udc->num_ep; i++) > > no the limit need to specified in the driver as a checkpoint by the compatible > or platform driver id You mean, we should not trust the data passed from dt node or platform data? Or do you think we should do double confirm? > Best Regards, > J. >> if (ep_status & (1 << i)) { >> if (ep_is_control(&udc->usba_ep[i])) >> usba_control_irq(udc, &udc->usba_ep[i]); >> -- >> 1.8.5.2 >> Best Regards, Bo Shen ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] USB: at91: fix the number of endpoint parameter 2014-01-20 3:39 ` Bo Shen @ 2014-01-21 5:49 ` Jean-Christophe PLAGNIOL-VILLARD 2014-01-21 8:12 ` Bo Shen 0 siblings, 1 reply; 14+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2014-01-21 5:49 UTC (permalink / raw) To: linux-arm-kernel On 11:39 Mon 20 Jan , Bo Shen wrote: > Hi J, > > On 01/18/2014 01:20 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > >On 10:59 Fri 17 Jan , Bo Shen wrote: > >>In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS > >>is only 7. So, fix it for sama5d3 SoC using the udc->num_ep. > >> > >>Signed-off-by: Bo Shen <voice.shen@atmel.com> > >>--- > >> > >> drivers/usb/gadget/atmel_usba_udc.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >>diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c > >>index 2cb52e0..7e67a81 100644 > >>--- a/drivers/usb/gadget/atmel_usba_udc.c > >>+++ b/drivers/usb/gadget/atmel_usba_udc.c > >>@@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) > >> if (ep_status) { > >> int i; > >> > >>- for (i = 0; i < USBA_NR_ENDPOINTS; i++) > >>+ for (i = 0; i < udc->num_ep; i++) > > > >no the limit need to specified in the driver as a checkpoint by the compatible > >or platform driver id > > You mean, we should not trust the data passed from dt node or > platform data? Or do you think we should do double confirm? no base on the driver name or the compatible you will known the MAX EP not based on the dt ep description as we do on pinctrl-at91 Best Regards, J. > >> if (ep_status & (1 << i)) { > >> if (ep_is_control(&udc->usba_ep[i])) > >> usba_control_irq(udc, &udc->usba_ep[i]); > >>-- > >>1.8.5.2 > >> > > Best Regards, > Bo Shen ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] USB: at91: fix the number of endpoint parameter 2014-01-21 5:49 ` Jean-Christophe PLAGNIOL-VILLARD @ 2014-01-21 8:12 ` Bo Shen 2014-01-21 9:06 ` Nicolas Ferre 0 siblings, 1 reply; 14+ messages in thread From: Bo Shen @ 2014-01-21 8:12 UTC (permalink / raw) To: linux-arm-kernel Hi J, On 01/21/2014 01:49 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 11:39 Mon 20 Jan , Bo Shen wrote: >> Hi J, >> >> On 01/18/2014 01:20 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: >>> On 10:59 Fri 17 Jan , Bo Shen wrote: >>>> In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS >>>> is only 7. So, fix it for sama5d3 SoC using the udc->num_ep. >>>> >>>> Signed-off-by: Bo Shen <voice.shen@atmel.com> >>>> --- >>>> >>>> drivers/usb/gadget/atmel_usba_udc.c | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c >>>> index 2cb52e0..7e67a81 100644 >>>> --- a/drivers/usb/gadget/atmel_usba_udc.c >>>> +++ b/drivers/usb/gadget/atmel_usba_udc.c >>>> @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) >>>> if (ep_status) { >>>> int i; >>>> >>>> - for (i = 0; i < USBA_NR_ENDPOINTS; i++) >>>> + for (i = 0; i < udc->num_ep; i++) >>> >>> no the limit need to specified in the driver as a checkpoint by the compatible >>> or platform driver id >> >> You mean, we should not trust the data passed from dt node or >> platform data? Or do you think we should do double confirm? > > no base on the driver name or the compatible you will known the MAX EP > > not based on the dt ep description > > as we do on pinctrl-at91 I am sorry, I am not fully get it after reading the code of pinctrl-at91.c, can you give the example code in pinctrl-at91.c? Btw, the udc->num_ep is get from the following code. for dt --->8--- while ((pp = of_get_next_child(np, pp))) udc->num_ep++; ---<8--- for non-dt --->8--- udc->num_ep = pdata->num_ep; ---8<--- > Best Regards, > J. >>>> if (ep_status & (1 << i)) { >>>> if (ep_is_control(&udc->usba_ep[i])) >>>> usba_control_irq(udc, &udc->usba_ep[i]); >>>> -- >>>> 1.8.5.2 >>>> >> >> Best Regards, >> Bo Shen Best Regards, Bo Shen ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] USB: at91: fix the number of endpoint parameter 2014-01-21 8:12 ` Bo Shen @ 2014-01-21 9:06 ` Nicolas Ferre 2014-02-07 8:37 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 1 reply; 14+ messages in thread From: Nicolas Ferre @ 2014-01-21 9:06 UTC (permalink / raw) To: linux-arm-kernel On 21/01/2014 09:12, Bo Shen : > Hi J, > > On 01/21/2014 01:49 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: >> On 11:39 Mon 20 Jan , Bo Shen wrote: >>> Hi J, >>> >>> On 01/18/2014 01:20 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: >>>> On 10:59 Fri 17 Jan , Bo Shen wrote: >>>>> In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS >>>>> is only 7. So, fix it for sama5d3 SoC using the udc->num_ep. >>>>> >>>>> Signed-off-by: Bo Shen <voice.shen@atmel.com> >>>>> --- >>>>> >>>>> drivers/usb/gadget/atmel_usba_udc.c | 2 +- >>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>> >>>>> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c >>>>> index 2cb52e0..7e67a81 100644 >>>>> --- a/drivers/usb/gadget/atmel_usba_udc.c >>>>> +++ b/drivers/usb/gadget/atmel_usba_udc.c >>>>> @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) >>>>> if (ep_status) { >>>>> int i; >>>>> >>>>> - for (i = 0; i < USBA_NR_ENDPOINTS; i++) >>>>> + for (i = 0; i < udc->num_ep; i++) >>>> >>>> no the limit need to specified in the driver as a checkpoint by the compatible >>>> or platform driver id >>> >>> You mean, we should not trust the data passed from dt node or >>> platform data? Or do you think we should do double confirm? >> >> no base on the driver name or the compatible you will known the MAX EP >> >> not based on the dt ep description >> >> as we do on pinctrl-at91 > > I am sorry, I am not fully get it after reading the code of > pinctrl-at91.c, can you give the example code in pinctrl-at91.c? > > Btw, the udc->num_ep is get from the following code. > for dt > --->8--- > while ((pp = of_get_next_child(np, pp))) > udc->num_ep++; > ---<8--- > > for non-dt > --->8--- > udc->num_ep = pdata->num_ep; > ---8<--- It seems to me pretty valid to use num_ep in this driver and not have to rely on another compatibility string just for this. The information is here, it is retrieved pretty cleanly so I vote for a simple use of it: if we introduce another information we will have to double check the cross errors that would happen... Bye, >>>>> if (ep_status & (1 << i)) { >>>>> if (ep_is_control(&udc->usba_ep[i])) >>>>> usba_control_irq(udc, &udc->usba_ep[i]); >>>>> -- >>>>> 1.8.5.2 >>>>> >>> >>> Best Regards, >>> Bo Shen > > Best Regards, > Bo Shen > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 1/2] USB: at91: fix the number of endpoint parameter 2014-01-21 9:06 ` Nicolas Ferre @ 2014-02-07 8:37 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 0 replies; 14+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2014-02-07 8:37 UTC (permalink / raw) To: linux-arm-kernel On 10:06 Tue 21 Jan , Nicolas Ferre wrote: > On 21/01/2014 09:12, Bo Shen : > > Hi J, > > > > On 01/21/2014 01:49 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > >> On 11:39 Mon 20 Jan , Bo Shen wrote: > >>> Hi J, > >>> > >>> On 01/18/2014 01:20 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > >>>> On 10:59 Fri 17 Jan , Bo Shen wrote: > >>>>> In sama5d3 SoC, there are 16 endpoints. As the USBA_NR_ENDPOINTS > >>>>> is only 7. So, fix it for sama5d3 SoC using the udc->num_ep. > >>>>> > >>>>> Signed-off-by: Bo Shen <voice.shen@atmel.com> > >>>>> --- > >>>>> > >>>>> drivers/usb/gadget/atmel_usba_udc.c | 2 +- > >>>>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>>>> > >>>>> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c > >>>>> index 2cb52e0..7e67a81 100644 > >>>>> --- a/drivers/usb/gadget/atmel_usba_udc.c > >>>>> +++ b/drivers/usb/gadget/atmel_usba_udc.c > >>>>> @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) > >>>>> if (ep_status) { > >>>>> int i; > >>>>> > >>>>> - for (i = 0; i < USBA_NR_ENDPOINTS; i++) > >>>>> + for (i = 0; i < udc->num_ep; i++) > >>>> > >>>> no the limit need to specified in the driver as a checkpoint by the compatible > >>>> or platform driver id > >>> > >>> You mean, we should not trust the data passed from dt node or > >>> platform data? Or do you think we should do double confirm? > >> > >> no base on the driver name or the compatible you will known the MAX EP > >> > >> not based on the dt ep description > >> > >> as we do on pinctrl-at91 > > > > I am sorry, I am not fully get it after reading the code of > > pinctrl-at91.c, can you give the example code in pinctrl-at91.c? > > > > Btw, the udc->num_ep is get from the following code. > > for dt > > --->8--- > > while ((pp = of_get_next_child(np, pp))) > > udc->num_ep++; > > ---<8--- > > > > for non-dt > > --->8--- > > udc->num_ep = pdata->num_ep; > > ---8<--- > > It seems to me pretty valid to use num_ep in this driver and not have to > rely on another compatibility string just for this. > The information is here, it is retrieved pretty cleanly so I vote for a > simple use of it: if we introduce another information we will have to > double check the cross errors that would happen... here is the key point you describe the HW so choose detect the IP version and then check we do not describe too many EP or you prove the correct compatible so we known this not the same IP and we can check the DT information Best Regards, J. > > Bye, > > >>>>> if (ep_status & (1 << i)) { > >>>>> if (ep_is_control(&udc->usba_ep[i])) > >>>>> usba_control_irq(udc, &udc->usba_ep[i]); > >>>>> -- > >>>>> 1.8.5.2 > >>>>> > >>> > >>> Best Regards, > >>> Bo Shen > > > > Best Regards, > > Bo Shen > > > > > -- > Nicolas Ferre ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2014-02-19 1:46 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-01-17 2:59 [PATCH 1/2] USB: at91: fix the number of endpoint parameter Bo Shen 2014-01-17 2:59 ` [PATCH 2/2] USB: at91: using USBA_NR_DMAS for DMA channels Bo Shen 2014-01-17 9:29 ` Nicolas Ferre 2014-02-18 16:19 ` Felipe Balbi 2014-02-19 1:14 ` Bo Shen 2014-02-19 1:22 ` Felipe Balbi 2014-02-19 1:46 ` Bo Shen 2014-01-17 9:29 ` [PATCH 1/2] USB: at91: fix the number of endpoint parameter Nicolas Ferre 2014-01-18 5:20 ` Jean-Christophe PLAGNIOL-VILLARD 2014-01-20 3:39 ` Bo Shen 2014-01-21 5:49 ` Jean-Christophe PLAGNIOL-VILLARD 2014-01-21 8:12 ` Bo Shen 2014-01-21 9:06 ` Nicolas Ferre 2014-02-07 8:37 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).