[Patch v3 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu

[daniel.lezcano@linaro.org (Daniel Lezcano)]

On 02/19/2014 03:12 PM, Andrew Lunn wrote:
> With the move of kirkwood into mach-mvebu, drivers Kconfig need
> tweeking to allow the kirkwood specific drivers to be built.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Richard Purdie <rpurdie@rpsys.net>
> Cc: Bryan Wu <cooloney@gmail.com>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <eduardo.valentin@ti.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> v2
> Simplify cpufreq/Kconfig.arm
> ---
>   drivers/cpufreq/Kconfig.arm | 2 +-
>   drivers/cpuidle/Kconfig.arm | 2 +-

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

>   drivers/leds/Kconfig        | 4 ++--
>   drivers/phy/Kconfig         | 2 +-
>   drivers/thermal/Kconfig     | 2 +-
>   sound/soc/kirkwood/Kconfig  | 2 +-
>   6 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 31297499a60a..077db3aa985b 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -113,7 +113,7 @@ config ARM_INTEGRATOR
>   	  If in doubt, say Y.
>
>   config ARM_KIRKWOOD_CPUFREQ
> -	def_bool ARCH_KIRKWOOD && OF
> +	def_bool MACH_KIRKWOOD
>   	help
>   	  This adds the CPUFreq driver for Marvell Kirkwood
>   	  SoCs.
> diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
> index d988948a89a0..97ccc31dbdd8 100644
> --- a/drivers/cpuidle/Kconfig.arm
> +++ b/drivers/cpuidle/Kconfig.arm
> @@ -22,7 +22,7 @@ config ARM_HIGHBANK_CPUIDLE
>
>   config ARM_KIRKWOOD_CPUIDLE
>   	bool "CPU Idle Driver for Marvell Kirkwood SoCs"
> -	depends on ARCH_KIRKWOOD
> +	depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
>   	help
>   	  This adds the CPU Idle driver for Marvell Kirkwood SoCs.
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 72156c123033..44c358ecf5a1 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -421,7 +421,7 @@ config LEDS_MC13783
>   config LEDS_NS2
>   	tristate "LED support for Network Space v2 GPIO LEDs"
>   	depends on LEDS_CLASS
> -	depends on ARCH_KIRKWOOD
> +	depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
>   	default y
>   	help
>   	  This option enable support for the dual-GPIO LED found on the
> @@ -431,7 +431,7 @@ config LEDS_NS2
>   config LEDS_NETXBIG
>   	tristate "LED support for Big Network series LEDs"
>   	depends on LEDS_CLASS
> -	depends on ARCH_KIRKWOOD
> +	depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
>   	default y
>   	help
>   	  This option enable support for LEDs found on the LaCie 2Big
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index afa2354f6600..5e6b33f9c294 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -24,7 +24,7 @@ config PHY_EXYNOS_MIPI_VIDEO
>
>   config PHY_MVEBU_SATA
>   	def_bool y
> -	depends on ARCH_KIRKWOOD || ARCH_DOVE
> +	depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_KIRKWOOD
>   	depends on OF
>   	select GENERIC_PHY
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 35c066489a19..1bc9cbc4f1b8 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -142,7 +142,7 @@ config RCAR_THERMAL
>
>   config KIRKWOOD_THERMAL
>   	tristate "Temperature sensor on Marvell Kirkwood SoCs"
> -	depends on ARCH_KIRKWOOD
> +	depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
>   	depends on OF
>   	help
>   	  Support for the Kirkwood thermal sensor driver into the Linux thermal
> diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig
> index 78ed4a42ad21..106e2e22fed2 100644
> --- a/sound/soc/kirkwood/Kconfig
> +++ b/sound/soc/kirkwood/Kconfig
> @@ -1,6 +1,6 @@
>   config SND_KIRKWOOD_SOC
>   	tristate "SoC Audio for the Marvell Kirkwood and Dove chips"
> -	depends on ARCH_KIRKWOOD || ARCH_DOVE || COMPILE_TEST
> +	depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_KIRKWOOD || COMPILE_TEST
>   	help
>   	  Say Y or M if you want to add support for codecs attached to
>   	  the Kirkwood I2S interface. You will also need to select the
>


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog