From mboxrd@z Thu Jan 1 00:00:00 1970 From: daniel.lezcano@linaro.org (Daniel Lezcano) Date: Thu, 20 Feb 2014 09:55:00 +0100 Subject: [Patch v3 18/23] drivers: Enable building of Kirkwood drivers for mach-mvebu In-Reply-To: <1392819174-11634-19-git-send-email-andrew@lunn.ch> References: <1392819174-11634-1-git-send-email-andrew@lunn.ch> <1392819174-11634-19-git-send-email-andrew@lunn.ch> Message-ID: <5305C2E4.9040302@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 02/19/2014 03:12 PM, Andrew Lunn wrote: > With the move of kirkwood into mach-mvebu, drivers Kconfig need > tweeking to allow the kirkwood specific drivers to be built. > > Signed-off-by: Andrew Lunn > Acked-by: Arnd Bergmann > Cc: Viresh Kumar > Cc: Rafael J. Wysocki > Cc: Daniel Lezcano > Cc: Richard Purdie > Cc: Bryan Wu > Cc: Kishon Vijay Abraham I > Cc: Zhang Rui > Cc: Eduardo Valentin > Cc: Mark Brown > Cc: Liam Girdwood > v2 > Simplify cpufreq/Kconfig.arm > --- > drivers/cpufreq/Kconfig.arm | 2 +- > drivers/cpuidle/Kconfig.arm | 2 +- Acked-by: Daniel Lezcano > drivers/leds/Kconfig | 4 ++-- > drivers/phy/Kconfig | 2 +- > drivers/thermal/Kconfig | 2 +- > sound/soc/kirkwood/Kconfig | 2 +- > 6 files changed, 7 insertions(+), 7 deletions(-) > > diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm > index 31297499a60a..077db3aa985b 100644 > --- a/drivers/cpufreq/Kconfig.arm > +++ b/drivers/cpufreq/Kconfig.arm > @@ -113,7 +113,7 @@ config ARM_INTEGRATOR > If in doubt, say Y. > > config ARM_KIRKWOOD_CPUFREQ > - def_bool ARCH_KIRKWOOD && OF > + def_bool MACH_KIRKWOOD > help > This adds the CPUFreq driver for Marvell Kirkwood > SoCs. > diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm > index d988948a89a0..97ccc31dbdd8 100644 > --- a/drivers/cpuidle/Kconfig.arm > +++ b/drivers/cpuidle/Kconfig.arm > @@ -22,7 +22,7 @@ config ARM_HIGHBANK_CPUIDLE > > config ARM_KIRKWOOD_CPUIDLE > bool "CPU Idle Driver for Marvell Kirkwood SoCs" > - depends on ARCH_KIRKWOOD > + depends on ARCH_KIRKWOOD || MACH_KIRKWOOD > help > This adds the CPU Idle driver for Marvell Kirkwood SoCs. > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > index 72156c123033..44c358ecf5a1 100644 > --- a/drivers/leds/Kconfig > +++ b/drivers/leds/Kconfig > @@ -421,7 +421,7 @@ config LEDS_MC13783 > config LEDS_NS2 > tristate "LED support for Network Space v2 GPIO LEDs" > depends on LEDS_CLASS > - depends on ARCH_KIRKWOOD > + depends on ARCH_KIRKWOOD || MACH_KIRKWOOD > default y > help > This option enable support for the dual-GPIO LED found on the > @@ -431,7 +431,7 @@ config LEDS_NS2 > config LEDS_NETXBIG > tristate "LED support for Big Network series LEDs" > depends on LEDS_CLASS > - depends on ARCH_KIRKWOOD > + depends on ARCH_KIRKWOOD || MACH_KIRKWOOD > default y > help > This option enable support for LEDs found on the LaCie 2Big > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index afa2354f6600..5e6b33f9c294 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -24,7 +24,7 @@ config PHY_EXYNOS_MIPI_VIDEO > > config PHY_MVEBU_SATA > def_bool y > - depends on ARCH_KIRKWOOD || ARCH_DOVE > + depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_KIRKWOOD > depends on OF > select GENERIC_PHY > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 35c066489a19..1bc9cbc4f1b8 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -142,7 +142,7 @@ config RCAR_THERMAL > > config KIRKWOOD_THERMAL > tristate "Temperature sensor on Marvell Kirkwood SoCs" > - depends on ARCH_KIRKWOOD > + depends on ARCH_KIRKWOOD || MACH_KIRKWOOD > depends on OF > help > Support for the Kirkwood thermal sensor driver into the Linux thermal > diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig > index 78ed4a42ad21..106e2e22fed2 100644 > --- a/sound/soc/kirkwood/Kconfig > +++ b/sound/soc/kirkwood/Kconfig > @@ -1,6 +1,6 @@ > config SND_KIRKWOOD_SOC > tristate "SoC Audio for the Marvell Kirkwood and Dove chips" > - depends on ARCH_KIRKWOOD || ARCH_DOVE || COMPILE_TEST > + depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_KIRKWOOD || COMPILE_TEST > help > Say Y or M if you want to add support for codecs attached to > the Kirkwood I2S interface. You will also need to select the > -- Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog