From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Wed, 5 Mar 2014 18:12:49 +0530 Subject: [PATCH v5 6/6] arm/dts: added dt properties to adapt to the new phy framwork In-Reply-To: <1393846695-14644-7-git-send-email-kishon@ti.com> References: <1393846695-14644-1-git-send-email-kishon@ti.com> <1393846695-14644-7-git-send-email-kishon@ti.com> Message-ID: <53171BC9.8050808@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Tony/Benoit, On Monday 03 March 2014 05:08 PM, Kishon Vijay Abraham I wrote: > Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation > of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt > and Documentation/devicetree/bindings/phy/ti-phy.txt. Can this patch be queued for 3.15 merge window? Thanks Kishon > > Signed-off-by: Kishon Vijay Abraham I > --- > arch/arm/boot/dts/omap5.dtsi | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index a72813a..1c68558 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -732,7 +732,8 @@ > compatible = "snps,dwc3"; > reg = <0x4a030000 0x10000>; > interrupts = ; > - usb-phy = <&usb2_phy>, <&usb3_phy>; > + phys = <&usb2_phy>, <&usb3_phy>; > + phy-names = "usb2-phy", "usb3-phy"; > dr_mode = "peripheral"; > tx-fifo-resize; > }; > @@ -749,6 +750,7 @@ > compatible = "ti,omap-usb2"; > reg = <0x4a084000 0x7c>; > ctrl-module = <&omap_control_usb2phy>; > + #phy-cells = <0>; > }; > > usb3_phy: usb3phy at 4a084400 { > @@ -758,6 +760,7 @@ > <0x4a084c00 0x40>; > reg-names = "phy_rx", "phy_tx", "pll_ctrl"; > ctrl-module = <&omap_control_usb3phy>; > + #phy-cells = <0>; > }; > }; > >