* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 @ 2014-03-06 13:45 Rahul Sharma 2014-03-07 13:56 ` Pankaj Dubey 0 siblings, 1 reply; 12+ messages in thread From: Rahul Sharma @ 2014-03-06 13:45 UTC (permalink / raw) To: linux-arm-kernel Add support for exynos5260 clocks in clock driver. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> --- drivers/clk/samsung/Makefile | 1 + drivers/clk/samsung/clk-exynos5260.c | 1890 ++++++++++++++++++++++++++++++++++ drivers/clk/samsung/clk-exynos5260.h | 448 ++++++++ 3 files changed, 2339 insertions(+) create mode 100644 drivers/clk/samsung/clk-exynos5260.c create mode 100644 drivers/clk/samsung/clk-exynos5260.h diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 77313e2..56e7d38 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o +obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c new file mode 100644 index 0000000..0668234 --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5260.c @@ -0,0 +1,1890 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos5260 SoC. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include "clk-exynos5260.h" +#include "clk.h" +#include "clk-pll.h" + +#include <dt-bindings/clk/exynos5260-clk.h> + +static LIST_HEAD(clock_reg_cache_list); + +struct exynos5260_clock_reg_cache { + struct list_head node; + void __iomem *reg_base; + struct samsung_clk_reg_dump *rdump; + unsigned int rd_num; +}; + +struct exynos5260_cmu_info { + /* list and number of pll clocks */ + struct samsung_pll_clock *pll_clks; + unsigned int nr_pll_clks; + /* list and number of mux clocks */ + struct samsung_mux_clock *mux_clks; + unsigned int nr_mux_clks; + /* list and number of div clocks */ + struct samsung_div_clock *div_clks; + unsigned int nr_div_clks; + /* list and number of gate clocks */ + struct samsung_gate_clock *gate_clks; + unsigned int nr_gate_clks; + /* total number of clocks */ + unsigned int nr_clk_ids; + + /* list and number of clocks registers */ + unsigned long *clk_regs; + unsigned int nr_clk_regs; +}; + +/* + * Applicable for all 2550 Type PLLS for Exynos5260, listed below + * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, + * BUS_PLL, MEDIA_PLL, G3D_PLL. + */ +static const struct samsung_pll_rate_table pll2550_24mhz_tbl[] = { + PLL_35XX_RATE(1700000000, 425, 6, 0), + PLL_35XX_RATE(1600000000, 200, 3, 0), + PLL_35XX_RATE(1500000000, 250, 4, 0), + PLL_35XX_RATE(1400000000, 175, 3, 0), + PLL_35XX_RATE(1300000000, 325, 6, 0), + PLL_35XX_RATE(1200000000, 400, 4, 1), + PLL_35XX_RATE(1100000000, 275, 3, 1), + PLL_35XX_RATE(1000000000, 250, 3, 1), + PLL_35XX_RATE(933000000, 311, 4, 1), + PLL_35XX_RATE(900000000, 300, 4, 1), + PLL_35XX_RATE(800000000, 200, 3, 1), + PLL_35XX_RATE(733000000, 733, 12, 1), + PLL_35XX_RATE(700000000, 175, 3, 1), + PLL_35XX_RATE(667000000, 667, 12, 1), + PLL_35XX_RATE(633000000, 211, 4, 1), + PLL_35XX_RATE(620000000, 310, 3, 2), + PLL_35XX_RATE(600000000, 400, 4, 2), + PLL_35XX_RATE(543000000, 362, 4, 2), + PLL_35XX_RATE(533000000, 533, 6, 2), + PLL_35XX_RATE(500000000, 250, 3, 2), + PLL_35XX_RATE(450000000, 300, 4, 2), + PLL_35XX_RATE(400000000, 200, 3, 2), + PLL_35XX_RATE(350000000, 175, 3, 2), + PLL_35XX_RATE(300000000, 400, 4, 3), + PLL_35XX_RATE(266000000, 266, 3, 3), + PLL_35XX_RATE(200000000, 200, 3, 3), + PLL_35XX_RATE(160000000, 160, 3, 3), +}; + +/* + * Applicable for 2650 Type PLL for AUD_PLL. + */ +static const struct samsung_pll_rate_table pll2650_24mhz_tbl[] = { + PLL_36XX_RATE(1600000000, 200, 3, 0, 0), + PLL_36XX_RATE(1200000000, 100, 2, 0, 0), + PLL_36XX_RATE(1000000000, 250, 3, 1, 0), + PLL_36XX_RATE(800000000, 200, 3, 1, 0), + PLL_36XX_RATE(600000000, 100, 2, 1, 0), + PLL_36XX_RATE(532000000, 266, 3, 2, 0), + PLL_36XX_RATE(480000000, 160, 2, 2, 0), + PLL_36XX_RATE(432000000, 144, 2, 2, 0), + PLL_36XX_RATE(400000000, 200, 3, 2, 0), + PLL_36XX_RATE(394073130, 459, 7, 2, 49282), + PLL_36XX_RATE(333000000, 111, 2, 2, 0), + PLL_36XX_RATE(300000000, 100, 2, 2, 0), + PLL_36XX_RATE(266000000, 266, 3, 3, 0), + PLL_36XX_RATE(200000000, 200, 3, 3, 0), + PLL_36XX_RATE(166000000, 166, 3, 3, 0), + PLL_36XX_RATE(133000000, 266, 3, 4, 0), + PLL_36XX_RATE(100000000, 200, 3, 4, 0), + PLL_36XX_RATE(66000000, 176, 2, 5, 0), +}; + +static struct of_device_id ext_clk_match[] __initdata = { + { .compatible = "samsung,exynos5260-oscclk", .data = (void *)0, }, + { }, +}; + +#ifdef CONFIG_PM_SLEEP + +static int exynos5260_clk_suspend(void) +{ + struct exynos5260_clock_reg_cache *cache; + + list_for_each_entry(cache, &clock_reg_cache_list, node) + samsung_clk_save(cache->reg_base, cache->rdump, + cache->rd_num); + + return 0; +} + +static void exynos5260_clk_resume(void) +{ + struct exynos5260_clock_reg_cache *cache; + + list_for_each_entry(cache, &clock_reg_cache_list, node) + samsung_clk_restore(cache->reg_base, cache->rdump, + cache->rd_num); +} + +static struct syscore_ops exynos5260_clk_syscore_ops = { + .suspend = exynos5260_clk_suspend, + .resume = exynos5260_clk_resume, +}; + +static void exynos5260_clk_sleep_init(void __iomem *reg_base, + unsigned long *rdump, + unsigned long nr_rdump) +{ + struct exynos5260_clock_reg_cache *reg_cache; + + reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache), + GFP_KERNEL); + if (!reg_cache) + panic("could not allocate register cache.\n"); + + reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump); + + if (!reg_cache->rdump) + panic("could not allocate register dump storage.\n"); + + if (list_empty(&clock_reg_cache_list)) + register_syscore_ops(&exynos5260_clk_syscore_ops); + + reg_cache->rd_num = nr_rdump; + reg_cache->reg_base = reg_base; + list_add_tail(®_cache->node, &clock_reg_cache_list); +} + +#else +static void exynos5260_clk_sleep_init(void) {} +#endif + +static struct samsung_clk_provider * +__init exynos5260_cmu_register_one(struct device_node *np, + struct exynos5260_cmu_info *cmu) +{ + void __iomem *reg_base; + struct samsung_clk_provider *ctx; + + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + + ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids); + if (!ctx) + panic("%s: unable to alllocate ctx\n", __func__); + + if (cmu->pll_clks) + samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks, + reg_base); + if (cmu->mux_clks) + samsung_clk_register_mux(ctx, cmu->mux_clks, + cmu->nr_mux_clks); + if (cmu->div_clks) + samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks); + if (cmu->gate_clks) + samsung_clk_register_gate(ctx, cmu->gate_clks, + cmu->nr_gate_clks); + if (cmu->clk_regs) + exynos5260_clk_sleep_init(reg_base, cmu->clk_regs, + cmu->nr_clk_regs); + + return ctx; +} + + +/* CMU_AUD */ + +static unsigned long aud_clk_regs[] __initdata = { + MUX_SEL_AUD, + DIV_AUD0, + DIV_AUD1, + EN_ACLK_AUD, + EN_PCLK_AUD, + EN_SCLK_AUD, + EN_IP_AUD, +}; + +PNAME(mout_aud_pll_user_p) = {"fin_pll", "fout_aud_pll"}; +PNAME(mout_sclk_aud_i2s_p) = {"mout_aud_pll_user", "ioclk_i2s_cdclk"}; +PNAME(mout_sclk_aud_pcm_p) = {"mout_aud_pll_user", "ioclk_pcm_extclk"}; + +struct samsung_mux_clock aud_mux_clks[] __initdata = { + MUX(0, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p, + MUX_SEL_AUD, 8, 1), + MUX(0, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p, + MUX_SEL_AUD, 4, 1), + MUX(0, "mout_aud_pll_user", mout_aud_pll_user_p, + MUX_SEL_AUD, 0, 1), +}; + +struct samsung_div_clock aud_div_clks[] __initdata = { + DIV(0, "dout_aclk_aud_131", "mout_aud_pll_user", + DIV_AUD0, 0, 4), + DIV(0, "dout_sclk_aud_uart", "mout_aud_pll_user", + DIV_AUD1, 12, 4), + DIV(0, "dout_sclk_aud_pcm", "mout_sclk_aud_pcm", + DIV_AUD1, 4, 8), + DIV(0, "dout_sclk_aud_i2s", "mout_sclk_aud_i2s", + DIV_AUD1, 0, 4), +}; + +struct samsung_gate_clock aud_gate_clks[] __initdata = { + GATE(AUD_CLK_AUD_UART, "clk_aud_uart", "dout_aclk_aud_131", + EN_IP_AUD, 4, 0, 0), + GATE(AUD_CLK_PCM, "clk_pcm", "dout_aclk_aud_131", EN_IP_AUD, 3, 0, 0), + GATE(AUD_CLK_I2S, "clk_i2s", "dout_aclk_aud_131", EN_IP_AUD, 2, 0, 0), + GATE(AUD_CLK_DMAC, "clk_dmac", "dout_aclk_aud_131", + EN_IP_AUD, 1, 0, 0), + GATE(0, "clk_sramc", "dout_aclk_aud_131", EN_IP_AUD, 0, 0, 0), + + GATE(AUD_SCLK_AUD_UART, "sclk_aud_uart", "dout_sclk_aud_uart", + EN_SCLK_AUD, 2, CLK_SET_RATE_PARENT, 0), + GATE(AUD_SCLK_PCM, "sclk_aud_pcm", "dout_sclk_aud_pcm", + EN_SCLK_AUD, 1, CLK_SET_RATE_PARENT, 0), + GATE(AUD_SCLK_I2S, "sclk_aud_i2s", "dout_sclk_aud_i2s", + EN_SCLK_AUD, 0, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_aud_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = aud_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks); + cmu.div_clks = aud_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(aud_div_clks); + cmu.gate_clks = aud_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(aud_gate_clks); + cmu.nr_clk_ids = AUD_NR_CLK; + cmu.clk_regs = aud_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud", + exynos5260_clk_aud_init); + + +/* CMU_DISP */ + +static unsigned long disp_clk_regs[] __initdata = { + MUX_SEL_DISP0, + MUX_SEL_DISP1, + MUX_SEL_DISP2, + MUX_SEL_DISP3, + MUX_SEL_DISP4, + DIV_DISP, + EN_ACLK_DISP, + EN_PCLK_DISP, + EN_SCLK_DISP0, + EN_SCLK_DISP1, + EN_IP_DISP, + EN_IP_DISP_BUS, +}; + +PNAME(mout_phyclk_dptx_phy_ch3_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch3_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch2_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch2_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch1_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch1_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch0_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch0_txd_clk"}; + +PNAME(mout_aclk_disp_222_user_p) = {"fin_pll", "dout_aclk_disp_222"}; +PNAME(mout_sclk_disp_pixel_user_p) = {"fin_pll", "dout_sclk_disp_pixel"}; +PNAME(mout_aclk_disp_333_user_p) = {"fin_pll", "dout_aclk_disp_333"}; +PNAME(mout_phyclk_hdmi_phy_tmds_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_tmds_clko"}; +PNAME(mout_phyclk_hdmi_phy_ref_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_ref_clko"}; +PNAME(mout_phyclk_hdmi_phy_pixel_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_pixel_clko"}; +PNAME(mout_phyclk_hdmi_link_o_tmds_clkhi_user_p) = {"fin_pll", + "phyclk_hdmi_link_o_tmds_clkhi"}; +PNAME(mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p) = {"fin_pll", + "phyclk_mipi_dphy_4l_m_txbyte_clkhs"}; +PNAME(mout_phyclk_dptx_phy_o_ref_clk_24m_user_p) = {"fin_pll", + "phyclk_dptx_phy_o_ref_clk_24m"}; +PNAME(mout_phyclk_dptx_phy_clk_div2_user_p) = {"fin_pll", + "phyclk_dptx_phy_clk_div2"}; +PNAME(mout_sclk_dsim1_tx_clk_esc_clk_user_p) = {"fin_pll", + "sclk_dsim1_txclkescclk"}; +PNAME(mout_sclk_dsim1_tx_clk_esc3_user_p) = {"fin_pll", + "sclk_dsim1_txclkesc3"}; +PNAME(mout_sclk_dsim1_tx_clk_esc2_user_p) = {"fin_pll", + "sclk_dsim1_txclkesc2"}; +PNAME(mout_sclk_dsim1_tx_clk_esc1_user_p) = {"fin_pll", + "sclk_dsim1_txclkesc1"}; +PNAME(mout_sclk_dsim1_tx_clk_esc0_user_p) = {"fin_pll", + "sclk_dsim1_txclkesc0"}; +PNAME(mout_sclk_hdmi_pixel_p) = {"mout_sclk_disp_pixel_user", + "mout_aclk_disp_222_user"}; +PNAME(mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p) = {"fin_pll", + "phyclk_mipi_dphy_4l_m_rxclkesc0"}; +PNAME(mout_sclk_hdmi_spdif_p) = {"fin_pll", "ioclk_spdif_extclk", + "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"}; + +struct samsung_mux_clock disp_mux_clks[] __initdata = { + MUX(0, "mout_sclk_hdmi_spdif", mout_sclk_hdmi_spdif_p, + MUX_SEL_DISP4, 4, 2), + + MUX(0, "mout_sclk_dsim1_tx_clk_esc_clk_user", + mout_sclk_dsim1_tx_clk_esc_clk_user_p, + MUX_SEL_DISP2, 28, 1), + MUX(0, "mout_sclk_dsim1_tx_clk_esc3_user", + mout_sclk_dsim1_tx_clk_esc3_user_p, + MUX_SEL_DISP2, 24, 1), + MUX(0, "mout_sclk_dsim1_tx_clk_esc2_user", + mout_sclk_dsim1_tx_clk_esc2_user_p, + MUX_SEL_DISP2, 20, 1), + MUX(0, "mout_sclk_dsim1_tx_clk_esc1_user", + mout_sclk_dsim1_tx_clk_esc1_user_p, + MUX_SEL_DISP2, 16, 1), + MUX(0, "mout_sclk_dsim1_tx_clk_esc0_user", + mout_sclk_dsim1_tx_clk_esc0_user_p, + MUX_SEL_DISP2, 12, 1), + MUX(0, "mout_sclk_hdmi_pixel", mout_sclk_hdmi_pixel_p, + MUX_SEL_DISP2, 4, 1), + MUX(0, "mout_phyclk_mipi_dphy_4lmrxclk_esc0_user", + mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p, + MUX_SEL_DISP2, 0, 1), + + MUX(0, "mout_phyclk_hdmi_phy_tmds_clko_user", + mout_phyclk_hdmi_phy_tmds_clko_user_p, + MUX_SEL_DISP1, 28, 1), + MUX(0, "mout_phyclk_hdmi_phy_ref_clko_user", + mout_phyclk_hdmi_phy_ref_clko_user_p, + MUX_SEL_DISP1, 24, 1), + MUX(DISP_MOUT_HDMI_PHY_PIXEL, "mout_phyclk_hdmi_phy_pixel_clko_user", + mout_phyclk_hdmi_phy_pixel_clko_user_p, + MUX_SEL_DISP1, 20, 1), + MUX(0, "mout_phyclk_hdmi_link_o_tmds_clkhi_user", + mout_phyclk_hdmi_link_o_tmds_clkhi_user_p, + MUX_SEL_DISP1, 16, 1), + MUX(0, "mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs", + mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p, + MUX_SEL_DISP1, 8, 1), + MUX(0, "mout_phyclk_dptx_phy_o_ref_clk_24m_user", + mout_phyclk_dptx_phy_o_ref_clk_24m_user_p, + MUX_SEL_DISP1, 4, 1), + MUX(0, "mout_phyclk_dptx_phy_clk_div2_user", + mout_phyclk_dptx_phy_clk_div2_user_p, + MUX_SEL_DISP1, 0, 1), + + MUX(0, "mout_phyclk_dptx_phy_ch3_txd_clk_user", + mout_phyclk_dptx_phy_ch3_txd_clk_user_p, + MUX_SEL_DISP0, 28, 1), + MUX(0, "mout_phyclk_dptx_phy_ch2_txd_clk_user", + mout_phyclk_dptx_phy_ch2_txd_clk_user_p, + MUX_SEL_DISP0, 24, 1), + MUX(0, "mout_phyclk_dptx_phy_ch1_txd_clk_user", + mout_phyclk_dptx_phy_ch1_txd_clk_user_p, + MUX_SEL_DISP0, 20, 1), + MUX(0, "mout_phyclk_dptx_phy_ch0_txd_clk_user", + mout_phyclk_dptx_phy_ch0_txd_clk_user_p, + MUX_SEL_DISP0, 16, 1), + MUX(0, "mout_aclk_disp_222_user", mout_aclk_disp_222_user_p, + MUX_SEL_DISP0, 8, 1), + MUX(0, "mout_sclk_disp_pixel_user", mout_sclk_disp_pixel_user_p, + MUX_SEL_DISP0, 4, 1), + MUX(0, "mout_aclk_disp_333_user", mout_aclk_disp_333_user_p, + MUX_SEL_DISP0, 0, 1), +}; + +struct samsung_div_clock disp_div_clks[] __initdata = { + DIV(0, "dout_sclk_hdmi_phy_pixel_clki", "mout_sclk_hdmi_pixel", + DIV_DISP, 16, 4), + DIV(0, "dout_sclk_fimd1_extclkpll", "mout_sclk_disp_pixel_user", + DIV_DISP, 12, 4), + DIV(0, "dout_pclk_disp_111", "mout_aclk_disp_222_user", + DIV_DISP, 8, 4), +}; + +struct samsung_gate_clock disp_gate_clks[] __initdata = { + GATE(DISP_CLK_SMMU_TV, "clk_smmu3_tv", "mout_aclk_disp_222_user", + EN_IP_DISP, 25, 0, 0), + GATE(DISP_CLK_SMMU_FIMD1M1, "clk_smmu3_fimd1m1", + "mout_aclk_disp_222_user", + EN_IP_DISP, 23, 0, 0), + GATE(DISP_CLK_SMMU_FIMD1M0, "clk_smmu3_fimd1m0", + "mout_aclk_disp_222_user", + EN_IP_DISP, 22, 0, 0), + GATE(0, "clk_pixel_mixer", "mout_aclk_disp_222_user", + EN_IP_DISP, 13, CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_pixel_disp", "mout_aclk_disp_222_user", + EN_IP_DISP, 12, CLK_IGNORE_UNUSED, 0), + GATE(DISP_CLK_MIXER, "clk_mixer", "mout_aclk_disp_222_user", + EN_IP_DISP, 11, 0, 0), + GATE(DISP_CLK_MIPIPHY, "clk_mipi_dphy", "mout_aclk_disp_222_user", + EN_IP_DISP, 10, 0, 0), + GATE(DISP_CLK_HDMIPHY, "clk_hdmiphy", "mout_aclk_disp_222_user", + EN_IP_DISP, 9, 0, 0), + GATE(DISP_CLK_HDMI, "clk_hdmi", "mout_aclk_disp_222_user", + EN_IP_DISP, 8, 0, 0), + GATE(DISP_CLK_FIMD1, "clk_fimd1", "mout_aclk_disp_222_user", + EN_IP_DISP, 7, 0, 0), + GATE(DISP_CLK_DSIM1, "clk_dsim1", "mout_aclk_disp_222_user", + EN_IP_DISP, 6, 0, 0), + GATE(DISP_CLK_DPPHY, "clk_dptx_phy", "mout_aclk_disp_222_user", + EN_IP_DISP, 5, 0, 0), + GATE(DISP_CLK_DP, "clk_dptx_link", "mout_aclk_disp_222_user", + EN_IP_DISP, 4, 0, 0), + + GATE(DISP_SCLK_PIXEL, "sclk_hdmi_phy_pixel_clki", + "dout_sclk_hdmi_phy_pixel_clki", + EN_SCLK_DISP0, 29, CLK_SET_RATE_PARENT, 0), + GATE(DISP_MOUT_HDMI_PHY_PIXEL_USER, "sclk_hdmi_link_i_pixel", + "mout_phyclk_hdmi_phy_pixel_clko_user", + EN_SCLK_DISP0, 26, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_disp_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = disp_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks); + cmu.div_clks = disp_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(disp_div_clks); + cmu.gate_clks = disp_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(disp_gate_clks); + cmu.nr_clk_ids = DISP_NR_CLK; + cmu.clk_regs = disp_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp", + exynos5260_clk_disp_init); + + +/* CMU_EGL */ + +static unsigned long egl_clk_regs[] __initdata = { + EGL_PLL_LOCK, + EGL_PLL_CON0, + EGL_PLL_CON1, + EGL_PLL_FREQ_DET, + MUX_SEL_EGL, + MUX_ENABLE_EGL, + DIV_EGL, + DIV_EGL_PLL_FDET, + EN_ACLK_EGL, + EN_PCLK_EGL, + EN_SCLK_EGL, +}; + +PNAME(mout_egl_b_p) = {"mout_egl_pll", "dout_bus_pll"}; +PNAME(mout_egl_pll_p) = {"fin_pll", "fout_egl_pll"}; + +struct samsung_mux_clock egl_mux_clks[] __initdata = { + MUX(0, "mout_egl_b", mout_egl_b_p, MUX_SEL_EGL, 16, 1), + MUX(0, "mout_egl_pll", mout_egl_pll_p, MUX_SEL_EGL, 4, 1), +}; + +struct samsung_div_clock egl_div_clks[] __initdata = { + DIV(0, "dout_egl_pll", "mout_egl_b", DIV_EGL, 24, 3), + DIV(0, "dout_egl_pclk_dbg", "dout_egl_atclk", DIV_EGL, 20, 3), + DIV(0, "dout_egl_atclk", "dout_egl2", DIV_EGL, 16, 3), + DIV(0, "dout_pclk_egl", "dout_egl_atclk", DIV_EGL, 12, 3), + DIV(0, "dout_aclk_egl", "dout_egl2", DIV_EGL, 8, 3), + DIV(0, "dout_egl2", "dout_egl1", DIV_EGL, 4, 3), + DIV(0, "dout_egl1", "mout_egl_b", DIV_EGL, 0, 3), +}; + +static struct samsung_pll_clock egl_pll_clks[] __initdata = { + PLL(pll_2550xx, EGL_FOUT_EGL_PLL, "fout_egl_pll", "fin_pll", + EGL_PLL_LOCK, EGL_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_egl_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = egl_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(egl_pll_clks); + cmu.mux_clks = egl_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(egl_mux_clks); + cmu.div_clks = egl_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(egl_div_clks); + cmu.nr_clk_ids = EGL_NR_CLK; + cmu.clk_regs = egl_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl", + exynos5260_clk_egl_init); + + +/* CMU_FSYS */ + +static unsigned long fsys_clk_regs[] __initdata = { + MUX_SEL_FSYS0, + MUX_SEL_FSYS1, + EN_ACLK_FSYS, + EN_ACLK_FSYS_SECURE_RTIC, + EN_ACLK_FSYS_SECURE_SMMU_RTIC, + EN_SCLK_FSYS, + EN_IP_FSYS, + EN_IP_FSYS_SECURE_RTIC, + EN_IP_FSYS_SECURE_SMMU_RTIC, +}; + +PNAME(mout_phyclk_usbhost20_phyclk_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_phyclock"}; +PNAME(mout_phyclk_usbhost20_freeclk_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_freeclk"}; +PNAME(mout_phyclk_usbhost20_clk48mohci_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_clk48mohci"}; +PNAME(mout_phyclk_usbdrd30_pipe_pclk_user_p) = {"fin_pll", + "phyclk_usbdrd30_udrd30_pipe_pclk"}; +PNAME(mout_phyclk_usbdrd30_phyclock_user_p) = {"fin_pll", + "phyclk_usbdrd30_udrd30_phyclock"}; + +struct samsung_mux_clock fsys_mux_clks[] __initdata = { + MUX(0, "mout_phyclk_usbhost20_phyclk_user", + mout_phyclk_usbhost20_phyclk_user_p, + MUX_SEL_FSYS1, 16, 1), + MUX(0, "mout_phyclk_usbhost20_freeclk_user", + mout_phyclk_usbhost20_freeclk_user_p, + MUX_SEL_FSYS1, 12, 1), + MUX(0, "mout_phyclk_usbhost20_clk48mohci_user", + mout_phyclk_usbhost20_clk48mohci_user_p, + MUX_SEL_FSYS1, 8, 1), + MUX(0, "mout_phyclk_usbdrd30_pipe_pclk_user", + mout_phyclk_usbdrd30_pipe_pclk_user_p, + MUX_SEL_FSYS1, 4, 1), + MUX(0, "mout_phyclk_usbdrd30_phyclock_user", + mout_phyclk_usbdrd30_phyclock_user_p, + MUX_SEL_FSYS1, 0, 1), +}; + +struct samsung_gate_clock fsys_gate_clks[] __initdata = { + GATE(FSYS_CLK_TSI, "clk_tsi", "dout_aclk_fsys_200", + EN_IP_FSYS, 20, 0, 0), + GATE(FSYS_CLK_USBLINK, "clk_usblink", "dout_aclk_fsys_200", + EN_IP_FSYS, 18, 0, 0), + GATE(FSYS_CLK_USBHOST20, "clk_usbhost20", "dout_aclk_fsys_200", + EN_IP_FSYS, 15, 0, 0), + GATE(FSYS_CLK_USBDRD30, "clk_usbdrd30", "dout_aclk_fsys_200", + EN_IP_FSYS, 14, 0, 0), + GATE(FSYS_CLK_SROMC, "clk_sromc", "dout_aclk_fsys_200", + EN_IP_FSYS, 13, 0, 0), + GATE(FSYS_CLK_PDMA, "clk_pdma", "dout_aclk_fsys_200", + EN_IP_FSYS, 9, 0, 0), + GATE(FSYS_CLK_MMC2, "clk_mmc2", "dout_aclk_fsys_200", + EN_IP_FSYS, 8, 0, 0), + GATE(FSYS_CLK_MMC1, "clk_mmc1", "dout_aclk_fsys_200", + EN_IP_FSYS, 7, 0, 0), + GATE(FSYS_CLK_MMC0, "clk_mmc0", "dout_aclk_fsys_200", + EN_IP_FSYS, 6, 0, 0), + + GATE(FSYS_CLK_RTIC, "clk_rtic", "mout_bustop_pll_user", + EN_IP_FSYS_SECURE_RTIC, 11, 0, 0), + GATE(FSYS_CLK_SMMU_RTIC, "clk_smmu_rtic", "mout_bustop_pll_user", + EN_IP_FSYS_SECURE_SMMU_RTIC, 12, 0, 0), + + GATE(FSYS_PHYCLK_USBDRD30, "phyclk_usbdrd30_udrd30_phyclock_g", + "mout_phyclk_usbdrd30_phyclock_user", + EN_SCLK_FSYS, 7, 0, 0), + GATE(FSYS_PHYCLK_USBHOST20, "phyclk_usbhost20_phyclock", + "mout_phyclk_usbdrd30_phyclock_user", + EN_SCLK_FSYS, 1, 0, 0), +}; + +static void __init exynos5260_clk_fsys_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = fsys_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks); + cmu.gate_clks = fsys_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(fsys_gate_clks); + cmu.nr_clk_ids = FSYS_NR_CLK; + cmu.clk_regs = fsys_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys", + exynos5260_clk_fsys_init); + + +/* CMU_G2D */ + +static unsigned long g2d_clk_regs[] __initdata = { + MUX_SEL_G2D, + MUX_STAT_G2D, + DIV_G2D, + EN_ACLK_G2D, + EN_ACLK_G2D_SECURE_SSS, + EN_ACLK_G2D_SECURE_SLIM_SSS, + EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS, + EN_ACLK_G2D_SECURE_SMMU_SSS, + EN_ACLK_G2D_SECURE_SMMU_MDMA, + EN_ACLK_G2D_SECURE_SMMU_G2D, + EN_PCLK_G2D, + EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS, + EN_PCLK_G2D_SECURE_SMMU_SSS, + EN_PCLK_G2D_SECURE_SMMU_MDMA, + EN_PCLK_G2D_SECURE_SMMU_G2D, + EN_IP_G2D, + EN_IP_G2D_SECURE_SSS, + EN_IP_G2D_SECURE_SLIM_SSS, + EN_IP_G2D_SECURE_SMMU_SLIM_SSS, + EN_IP_G2D_SECURE_SMMU_SSS, + EN_IP_G2D_SECURE_SMMU_MDMA, + EN_IP_G2D_SECURE_SMMU_G2D, +}; + +PNAME(mout_aclk_g2d_333_user_p) = {"fin_pll", "dout_aclk_g2d_333"}; + +struct samsung_mux_clock g2d_mux_clks[] __initdata = { + MUX(0, "mout_aclk_g2d_333_user", mout_aclk_g2d_333_user_p, + MUX_SEL_G2D, 0, 1), +}; + +struct samsung_div_clock g2d_div_clks[] __initdata = { + DIV(0, "dout_pclk_g2d_83", "mout_aclk_g2d_333_user", + DIV_G2D, 0, 3), +}; + +struct samsung_gate_clock g2d_gate_clks[] __initdata = { + GATE(G2D_CLK_SMMU3_JPEG, "clk_smmu3_jpeg", "mout_aclk_g2d_333_user", + EN_IP_G2D, 16, 0, 0), + GATE(G2D_CLK_MDMA, "clk_mdma", "mout_aclk_g2d_333_user", + EN_IP_G2D, 6, 0, 0), + GATE(G2D_CLK_JPEG, "clk_jpeg", "mout_aclk_g2d_333_user", + EN_IP_G2D, 5, 0, 0), + GATE(G2D_CLK_G2D, "clk_g2d", "mout_aclk_g2d_333_user", + EN_IP_G2D, 4, 0, 0), + + GATE(G2D_CLK_SSS, "clk_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SSS, 17, 0, 0), + GATE(G2D_CLK_SLIM_SSS, "clk_slim_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SLIM_SSS, 11, 0, 0), + GATE(G2D_CLK_SMMU_SLIM_SSS, "clk_smmu_slim_sss", + "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_SLIM_SSS, 13, 0, 0), + GATE(G2D_CLK_SMMU_SSS, "clk_smmu_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_SSS, 14, 0, 0), + GATE(G2D_CLK_SMMU_MDMA, "clk_smmu_mdma", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_MDMA, 12, 0, 0), + GATE(G2D_CLK_SMMU3_G2D, "clk_smmu3_g2d", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_G2D, 15, 0, 0), +}; + +static void __init exynos5260_clk_g2d_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = g2d_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks); + cmu.div_clks = g2d_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(g2d_div_clks); + cmu.gate_clks = g2d_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(g2d_gate_clks); + cmu.nr_clk_ids = G2D_NR_CLK; + cmu.clk_regs = g2d_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d", + exynos5260_clk_g2d_init); + + +/* CMU_G3D */ + +static unsigned long g3d_clk_regs[] __initdata = { + G3D_PLL_LOCK, + G3D_PLL_CON0, + G3D_PLL_CON1, + G3D_PLL_FDET, + MUX_SEL_G3D, + DIV_G3D, + DIV_G3D_PLL_FDET, + EN_ACLK_G3D, + EN_PCLK_G3D, + EN_SCLK_G3D, + EN_IP_G3D, +}; + +PNAME(mout_g3d_pll_p) = {"fin_pll", "fout_g3d_pll"}; + +struct samsung_mux_clock g3d_mux_clks[] __initdata = { + MUX(0, "mout_g3d_pll", mout_g3d_pll_p, MUX_SEL_G3D, 0, 1), +}; + +struct samsung_div_clock g3d_div_clks[] __initdata = { + DIV(0, "dout_pclk_g3d", "dout_aclk_g3d", DIV_G3D, 0, 3), + DIV(0, "dout_aclk_g3d", "mout_g3d_pll", DIV_G3D, 4, 3), +}; + +struct samsung_gate_clock g3d_gate_clks[] __initdata = { + GATE(G3D_CLK_G3D_HPM, "clk_g3d_hpm", "dout_aclk_g3d", + EN_IP_G3D, 3, 0, 0), + GATE(G3D_CLK_G3D, "clk_g3d", "dout_aclk_g3d", EN_IP_G3D, 2, 0, 0), +}; + +static struct samsung_pll_clock g3d_pll_clks[] __initdata = { + PLL(pll_2550, G3D_FOUT_G3D_PLL, "fout_g3d_pll", "fin_pll", + G3D_PLL_LOCK, G3D_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_g3d_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = g3d_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(g3d_pll_clks); + cmu.mux_clks = g3d_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(g3d_mux_clks); + cmu.div_clks = g3d_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(g3d_div_clks); + cmu.gate_clks = g3d_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(g3d_gate_clks); + cmu.nr_clk_ids = G3D_NR_CLK; + cmu.clk_regs = g3d_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d", + exynos5260_clk_g3d_init); + + +/* CMU_GSCL */ + +static unsigned long gscl_clk_regs[] __initdata = { + MUX_SEL_GSCL, + DIV_GSCL, + EN_ACLK_GSCL, + EN_ACLK_GSCL_FIMC, + EN_ACLK_GSCL_SECURE_SMMU_GSCL0, + EN_ACLK_GSCL_SECURE_SMMU_GSCL1, + EN_ACLK_GSCL_SECURE_SMMU_MSCL0, + EN_ACLK_GSCL_SECURE_SMMU_MSCL1, + EN_PCLK_GSCL, + EN_PCLK_GSCL_FIMC, + EN_PCLK_GSCL_SECURE_SMMU_GSCL0, + EN_PCLK_GSCL_SECURE_SMMU_GSCL1, + EN_PCLK_GSCL_SECURE_SMMU_MSCL0, + EN_PCLK_GSCL_SECURE_SMMU_MSCL1, + EN_SCLK_GSCL, + EN_SCLK_GSCL_FIMC, + EN_IP_GSCL, + EN_IP_GSCL_FIMC, + EN_IP_GSCL_SECURE_SMMU_GSCL0, + EN_IP_GSCL_SECURE_SMMU_GSCL1, + EN_IP_GSCL_SECURE_SMMU_MSCL0, + EN_IP_GSCL_SECURE_SMMU_MSCL1, +}; + +PNAME(mout_aclk_gscl_333_user_p) = {"fin_pll", "fout_aud_pll"}; +PNAME(mout_aclk_m2m_400_user_p) = {"fin_pll", "dout_aclk_gscl_400"}; +PNAME(mout_aclk_gscl_fimc_user_p) = {"fin_pll", "dout_aclk_gscl_400"}; +PNAME(mout_aclk_csis_p) = {"dout_aclk_csis_200", "mout_aclk_gscl_fimc_user"}; + +struct samsung_mux_clock gscl_mux_clks[] __initdata = { + MUX(0, "mout_aclk_csis", mout_aclk_csis_p, MUX_SEL_GSCL, 24, 1), + MUX(0, "mout_aclk_gscl_fimc_user", mout_aclk_gscl_fimc_user_p, + MUX_SEL_GSCL, 8, 1), + MUX(0, "mout_aclk_m2m_400_user", mout_aclk_m2m_400_user_p, + MUX_SEL_GSCL, 4, 1), + MUX(0, "mout_aclk_gscl_333_user", mout_aclk_gscl_333_user_p, + MUX_SEL_GSCL, 0, 1), +}; + +struct samsung_div_clock gscl_div_clks[] __initdata = { + DIV(0, "dout_aclk_csis_200", "mout_aclk_m2m_400_user", + DIV_GSCL, 4, 3), + DIV(0, "dout_pclk_m2m_100", "mout_aclk_m2m_400_user", + DIV_GSCL, 0, 3), +}; + +struct samsung_gate_clock gscl_gate_clks[] __initdata = { + GATE(GSCL_CLK_PIXEL_GSCL1, "clk_pixel_gscl1", "mout_aclk_gscl_333", + EN_IP_GSCL, 9, 0, 0), + GATE(GSCL_CLK_PIXEL_GSCL0, "clk_pixel_gscl0", "mout_aclk_gscl_333", + EN_IP_GSCL, 8, 0, 0), + GATE(GSCL_CLK_MSCL1, "clk_mscl1", "mout_aclk_gscl_333", + EN_IP_GSCL, 5, 0, 0), + GATE(GSCL_CLK_MSCL0, "clk_mscl0", "mout_aclk_gscl_333", + EN_IP_GSCL, 4, 0, 0), + GATE(GSCL_CLK_GSCL1, "clk_gscl1", "mout_aclk_gscl_333", + EN_IP_GSCL, 3, 0, 0), + GATE(GSCL_CLK_GSCL0, "clk_gscl0", "mout_aclk_gscl_333", + EN_IP_GSCL, 2, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_D, "clk_fimc_lite_d", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 12, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_B, "clk_fimc_lite_b", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 11, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_A, "clk_fimc_lite_a", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 10, 0, 0), + GATE(GSCL_CLK_CSIS1, "clk_csis1", "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 9, 0, 0), + GATE(GSCL_CLK_CSIS0, "clk_csis0", "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 8, 0, 0), + GATE(GSCL_CLK_SMMU3_LITE_D, "clk_smmu3_lite_d", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 7, 0, 0), + GATE(GSCL_CLK_SMMU3_LITE_B, "clk_smmu3_lite_b", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 6, 0, 0), + GATE(GSCL_CLK_SMMU3_LITE_A, "clk_smmu3_lite_a", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 5, 0, 0), + GATE(GSCL_CLK_SMMU3_GSCL0, "clk_smmu3_gscl0", + "mout_aclk_gscl_333", + EN_IP_GSCL_SECURE_SMMU_GSCL0, 17, 0, 0), + GATE(GSCL_CLK_SMMU3_GSCL1, "clk_smmu3_gscl1", "mout_aclk_gscl_333", + EN_IP_GSCL_SECURE_SMMU_GSCL1, 18, 0, 0), + GATE(GSCL_CLK_SMMU3_MSCL0, "clk_smmu3_mscl0", + "mout_aclk_m2m_400_user", + EN_IP_GSCL_SECURE_SMMU_MSCL0, 19, 0, 0), + GATE(GSCL_CLK_SMMU3_MSCL1, "clk_smmu3_mscl1", + "mout_aclk_m2m_400_user", + EN_IP_GSCL_SECURE_SMMU_MSCL1, 20, 0, 0), + + GATE(GSCL_SCLK_CSIS1_WRAP, "sclk_csis1_wrap", "dout_aclk_csis_200", + EN_SCLK_GSCL_FIMC, 1, CLK_SET_RATE_PARENT, 0), + GATE(GSCL_SCLK_CSIS0_WRAP, "sclk_csis0_wrap", "dout_aclk_csis_200", + EN_SCLK_GSCL_FIMC, 0, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_gscl_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = gscl_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks); + cmu.div_clks = gscl_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(gscl_div_clks); + cmu.gate_clks = gscl_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(gscl_gate_clks); + cmu.nr_clk_ids = GSCL_NR_CLK; + cmu.clk_regs = gscl_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl", + exynos5260_clk_gscl_init); + + +/* CMU_ISP */ + +static unsigned long isp_clk_regs[] __initdata = { + MUX_SEL_ISP0, + MUX_SEL_ISP1, + DIV_ISP, + EN_ACLK_ISP0, + EN_ACLK_ISP1, + EN_PCLK_ISP0, + EN_PCLK_ISP1, + EN_SCLK_ISP, + EN_IP_ISP0, + EN_IP_ISP1, +}; + +PNAME(mout_isp_400_user_p) = {"fin_pll", "dout_aclk_isp1_400"}; +PNAME(mout_isp_266_user_p) = {"fin_pll", "dout_aclk_isp1_266"}; + +struct samsung_mux_clock isp_mux_clks[] __initdata = { + MUX(0, "mout_isp_400_user", mout_isp_400_user_p, + MUX_SEL_ISP0, 4, 1), + MUX(0, "mout_isp_266_user", mout_isp_266_user_p, + MUX_SEL_ISP0, 0, 1), +}; + +struct samsung_div_clock isp_div_clks[] __initdata = { + DIV(0, "dout_sclk_mpwm", "mout_kfc", DIV_ISP, 20, 2), + DIV(0, "dout_ca5_pclkdbg", "mout_kfc", DIV_ISP, 16, 4), + DIV(0, "dout_ca5_atclkin", "mout_kfc", DIV_ISP, 12, 3), + DIV(0, "dout_pclk_isp_133", "mout_kfc", DIV_ISP, 4, 4), + DIV(0, "dout_pclk_isp_66", "mout_kfc", DIV_ISP, 0, 3), +}; + +struct samsung_gate_clock isp_gate_clks[] __initdata = { + GATE(ISP_CLK_GIC, "clk_isp_gic", "mout_aclk_isp1_266", + EN_IP_ISP0, 15, 0, 0), + + GATE(ISP_CLK_WDT, "clk_isp_wdt", "mout_aclk_isp1_266", + EN_IP_ISP1, 31, 0, 0), + GATE(ISP_CLK_UART, "clk_isp_uart", "mout_aclk_isp1_266", + EN_IP_ISP1, 30, 0, 0), + GATE(ISP_CLK_SPI1, "clk_isp_spi1", "mout_aclk_isp1_266", + EN_IP_ISP1, 28, 0, 0), + GATE(ISP_CLK_SPI0, "clk_isp_spi0", "mout_aclk_isp1_266", + EN_IP_ISP1, 27, 0, 0), + + GATE(ISP_CLK_SMMU_SCALERP, "clk_isp_smmu_scalerp", + "mout_aclk_isp1_266", + EN_IP_ISP1, 26, 0, 0), + GATE(ISP_CLK_SMMU_SCALERC, "clk_isp_smmu_scalerc", + "mout_aclk_isp1_266", + EN_IP_ISP1, 25, 0, 0), + GATE(ISP_CLK_SMMU_ISPCX, "clk_smmu_ispcx", "mout_aclk_isp1_266", + EN_IP_ISP1, 24, 0, 0), + GATE(ISP_CLK_SMMU_ISP, "clk_smmu_isp", "mout_aclk_isp1_266", + EN_IP_ISP1, 23, 0, 0), + GATE(ISP_CLK_SMMU_FD, "clk_smmu_fd", "mout_aclk_isp1_266", + EN_IP_ISP1, 22, 0, 0), + GATE(ISP_CLK_SMMU_DRC, "clk_smmu_drc", "mout_aclk_isp1_266", + EN_IP_ISP1, 21, 0, 0), + GATE(ISP_CLK_PWM, "clk_isp_pwm", "mout_aclk_isp1_266", + EN_IP_ISP1, 14, 0, 0), + GATE(ISP_CLK_MTCADC, "clk_isp_mtcadc", "mout_aclk_isp1_266", + EN_IP_ISP1, 11, 0, 0), + GATE(ISP_CLK_MPWM, "clk_isp_mpwm", "mout_aclk_isp1_266", + EN_IP_ISP1, 10, 0, 0), + GATE(ISP_CLK_MCUCTL, "clk_isp_mcuctl", "mout_aclk_isp1_266", + EN_IP_ISP1, 9, 0, 0), + GATE(ISP_CLK_I2C1, "clk_isp_i2c1", "mout_aclk_isp1_266", + EN_IP_ISP1, 8, 0, 0), + GATE(ISP_CLK_I2C0, "clk_isp_i2c0", "mout_aclk_isp1_266", + EN_IP_ISP1, 7, 0, 0), + GATE(ISP_CLK_FIMC_SCALERP, "clk_isp_fimc_scalerp", + "mout_aclk_isp1_266", + EN_IP_ISP1, 6, 0, 0), + GATE(ISP_CLK_FIMC_SCALERC, "clk_isp_fimc_scalerc", + "mout_aclk_isp1_266", + EN_IP_ISP1, 5, 0, 0), + GATE(ISP_CLK_FIMC, "clk_isp_fimc", "mout_aclk_isp1_266", + EN_IP_ISP1, 4, 0, 0), + GATE(ISP_CLK_FIMC_FD, "clk_isp_fimc_fd", "mout_aclk_isp1_266", + EN_IP_ISP1, 3, 0, 0), + GATE(ISP_CLK_FIMC_DRC, "clk_isp_fimc_drc", "mout_aclk_isp1_266", + EN_IP_ISP1, 2, 0, 0), + GATE(ISP_CLK_CA5, "clk_isp_ca5", "mout_aclk_isp1_266", + EN_IP_ISP1, 1, 0, 0), + + GATE(ISP_SCLK_SPI0_EXT, "sclk_isp_spi0_ext", "fin_pll", + EN_SCLK_ISP, 9, CLK_SET_RATE_PARENT, 0), + GATE(ISP_SCLK_SPI1_EXT, "sclk_isp_spi1_ext", "fin_pll", + EN_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0), + GATE(ISP_SCLK_UART_EXT, "sclk_isp_uart_ext", "fin_pll", + EN_SCLK_ISP, 7, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_isp_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = isp_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks); + cmu.div_clks = isp_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(isp_div_clks); + cmu.gate_clks = isp_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(isp_gate_clks); + cmu.nr_clk_ids = ISP_NR_CLK; + cmu.clk_regs = isp_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp", + exynos5260_clk_isp_init); + + +/* CMU_KFC */ + +static unsigned long kfc_clk_regs[] __initdata = { + KFC_PLL_LOCK, + KFC_PLL_CON0, + KFC_PLL_CON1, + KFC_PLL_FDET, + MUX_SEL_KFC0, + MUX_SEL_KFC2, + DIV_KFC, + DIV_KFC_PLL_FDET, + EN_ACLK_KFC, + EN_PCLK_KFC, + EN_SCLK_KFC, + EN_IP_KFC, +}; + +PNAME(mout_kfc_pll_p) = {"fin_pll", "fout_kfc_pll"}; +PNAME(mout_kfc_p) = {"mout_kfc_pll", "dout_media_pll"}; + +struct samsung_mux_clock kfc_mux_clks[] __initdata = { + MUX(0, "mout_kfc_pll", mout_kfc_pll_p, MUX_SEL_KFC0, 0, 1), + MUX(0, "mout_kfc", mout_kfc_p, MUX_SEL_KFC2, 0, 1), +}; + +struct samsung_div_clock kfc_div_clks[] __initdata = { + DIV(0, "dout_kfc_pll", "mout_kfc", DIV_KFC, 24, 3), + DIV(0, "dout_pclk_kfc", "dout_kfc2", DIV_KFC, 20, 3), + DIV(0, "dout_aclk_kfc", "dout_kfc2", DIV_KFC, 16, 3), + DIV(0, "dout_kfc_pclk_dbg", "dout_kfc2", DIV_KFC, 12, 3), + DIV(0, "dout_kfc_atclk", "dout_kfc2", DIV_KFC, 8, 3), + DIV(0, "dout_kfc2", "dout_kfc1", DIV_KFC, 4, 3), + DIV(0, "dout_kfc1", "mout_kfc", DIV_KFC, 0, 3), +}; + +static struct samsung_pll_clock kfc_pll_clks[] __initdata = { + PLL(pll_2550xx, KFC_FOUT_KFC_PLL, "fout_kfc_pll", "fin_pll", + KFC_PLL_LOCK, KFC_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_kfc_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = kfc_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(kfc_pll_clks); + cmu.mux_clks = kfc_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(kfc_mux_clks); + cmu.div_clks = kfc_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(kfc_div_clks); + cmu.nr_clk_ids = KFC_NR_CLK; + cmu.clk_regs = kfc_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc", + exynos5260_clk_kfc_init); + + +/* CMU_MFC */ + +static unsigned long mfc_clk_regs[] __initdata = { + MUX_SEL_MFC, + DIV_MFC, + EN_ACLK_MFC, + EN_ACLK_SECURE_SMMU2_MFC, + EN_PCLK_MFC, + EN_PCLK_SECURE_SMMU2_MFC, + EN_IP_MFC, + EN_IP_MFC_SECURE_SMMU2_MFC, +}; + +PNAME(mout_aclk_mfc_333_user_p) = {"fin_pll", "dout_aclk_mfc_333"}; + +struct samsung_mux_clock mfc_mux_clks[] __initdata = { + MUX(0, "mout_aclk_mfc_333_user", mout_aclk_mfc_333_user_p, + MUX_SEL_MFC, 0, 1), +}; + +struct samsung_div_clock mfc_div_clks[] __initdata = { + DIV(0, "dout_pclk_mfc_83", "mout_aclk_mfc_333_user", + DIV_MFC, 0, 3), +}; + +struct samsung_gate_clock mfc_gate_clks[] __initdata = { + GATE(MFC_CLK_MFC, "clk_mfc", "mout_aclk_mfc_333_user", + EN_IP_MFC, 1, 0, 0), + + GATE(MFC_CLK_SMMU2_MFCM1, "clk_smmu2_mfcm1", "mout_aclk_mfc_333_user", + EN_IP_MFC_SECURE_SMMU2_MFC, 7, 0, 0), + GATE(MFC_CLK_SMMU2_MFCM0, "clk_smmu2_mfcm0", "mout_aclk_mfc_333_user", + EN_IP_MFC_SECURE_SMMU2_MFC, 6, 0, 0), +}; + +static void __init exynos5260_clk_mfc_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = mfc_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks); + cmu.div_clks = mfc_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(mfc_div_clks); + cmu.gate_clks = mfc_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(mfc_gate_clks); + cmu.nr_clk_ids = MFC_NR_CLK; + cmu.clk_regs = mfc_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc", + exynos5260_clk_mfc_init); + + +/* CMU_MIF */ + +static unsigned long mif_clk_regs[] __initdata = { + MEM_PLL_LOCK, + BUS_PLL_LOCK, + MEDIA_PLL_LOCK, + MEM_PLL_CON0, + MEM_PLL_CON1, + MEM_PLL_FDET, + BUS_PLL_CON0, + BUS_PLL_CON1, + BUS_PLL_FDET, + MEDIA_PLL_CON0, + MEDIA_PLL_CON1, + MEDIA_PLL_FDET, + MUX_SEL_MIF, + DIV_MIF, + DIV_MIF_PLL_FDET, + EN_ACLK_MIF, + EN_ACLK_MIF_SECURE_DREX1_TZ, + EN_ACLK_MIF_SECURE_DREX0_TZ, + EN_ACLK_MIF_SECURE_INTMEM, + EN_PCLK_MIF, + EN_PCLK_MIF_SECURE_MONOCNT, + EN_PCLK_MIF_SECURE_RTC_APBIF, + EN_PCLK_MIF_SECURE_DREX1_TZ, + EN_PCLK_MIF_SECURE_DREX0_TZ, + EN_SCLK_MIF, + EN_IP_MIF, + EN_IP_MIF_SECURE_MONOCNT, + EN_IP_MIF_SECURE_RTC_APBIF, + EN_IP_MIF_SECURE_DREX1_TZ, + EN_IP_MIF_SECURE_DREX0_TZ, + EN_IP_MIF_SECURE_INTEMEM, +}; + +PNAME(mout_mem_pll_p) = {"fin_pll", "fout_mem_pll"}; +PNAME(mout_bus_pll_p) = {"fin_pll", "fout_bus_pll"}; +PNAME(mout_media_pll_p) = {"fin_pll", "fout_media_pll"}; +PNAME(mout_mif_drex_p) = {"dout_mem_pll", "dout_bus_pll"}; +PNAME(mout_mif_drex2x_p) = {"dout_mem_pll", "dout_bus_pll"}; +PNAME(mout_clkm_phy_p) = {"mout_mif_drex", "dout_media_pll"}; +PNAME(mout_clk2x_phy_p) = {"mout_mif_drex2x", "dout_media_pll"}; + +struct samsung_mux_clock mif_mux_clks[] __initdata = { + MUX(0, "mout_clk2x_phy", mout_clk2x_phy_p, MUX_SEL_MIF, 24, 1), + MUX(0, "mout_mif_drex2x", mout_mif_drex2x_p, MUX_SEL_MIF, 20, 1), + MUX(0, "mout_clkm_phy", mout_clkm_phy_p, MUX_SEL_MIF, 16, 1), + MUX(0, "mout_mif_drex", mout_mif_drex_p, MUX_SEL_MIF, 12, 1), + MUX(0, "mout_media_pll", mout_media_pll_p, MUX_SEL_MIF, 8, 1), + MUX(0, "mout_bus_pll", mout_bus_pll_p, MUX_SEL_MIF, 4, 1), + MUX(0, "mout_mem_pll", mout_mem_pll_p, MUX_SEL_MIF, 0, 1), +}; + +struct samsung_div_clock mif_div_clks[] __initdata = { + DIV(0, "dout_aclk_bus_100", "dout_bus_pll", DIV_MIF, 28, 4), + DIV(0, "dout_aclk_bus_200", "dout_bus_pll", DIV_MIF, 24, 3), + DIV(0, "dout_aclk_mif_466", "dout_clk2x_phy", DIV_MIF, 20, 3), + DIV(0, "dout_clk2x_phy", "mout_clk2x_phy", DIV_MIF, 16, 4), + DIV(0, "dout_clkm_phy", "mout_clkm_phy", DIV_MIF, 12, 3), + DIV(0, "dout_bus_pll", "mout_bus_pll", DIV_MIF, 8, 3), + DIV(0, "dout_mem_pll", "mout_mem_pll", DIV_MIF, 4, 3), + DIV(0, "dout_media_pll", "mout_media_pll", DIV_MIF, 0, 3), +}; + +struct samsung_gate_clock mif_gate_clks[] __initdata = { + GATE(0, "clk_lpddr3phy_wrap1", "dout_clk2x_phy", + EN_IP_MIF, 13, CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_lpddr3phy_wrap0", "dout_clk2x_phy", + EN_IP_MIF, 12, CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_monocnt", "dout_aclk_bus_100", + EN_IP_MIF_SECURE_MONOCNT, 22, + CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_mif_rtc", "dout_aclk_bus_100", + EN_IP_MIF_SECURE_RTC_APBIF, 23, + CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_drex1", "dout_aclk_mif_466", + EN_IP_MIF_SECURE_DREX1_TZ, 9, + CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_drex0", "dout_aclk_mif_466", + EN_IP_MIF_SECURE_DREX0_TZ, 9, + CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_intmem", "dout_aclk_bus_200", + EN_IP_MIF_SECURE_INTEMEM, 11, + CLK_IGNORE_UNUSED, 0), + + GATE(0, "sclk_lpddr3phy_wrap_u1", "dout_clkm_phy", + EN_SCLK_MIF, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), + GATE(0, "sclk_lpddr3phy_wrap_u0", "dout_clkm_phy", + EN_SCLK_MIF, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), +}; + +static struct samsung_pll_clock mif_pll_clks[] __initdata = { + PLL(pll_2550xx, MIF_FOUT_MEM_PLL, "fout_mem_pll", "fin_pll", + MEM_PLL_LOCK, MEM_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2550xx, MIF_FOUT_BUS_PLL, "fout_bus_pll", "fin_pll", + BUS_PLL_LOCK, BUS_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2550xx, MIF_FOUT_MEDIA_PLL, "fout_media_pll", "fin_pll", + MEDIA_PLL_LOCK, MEDIA_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_mif_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = mif_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(mif_pll_clks); + cmu.mux_clks = mif_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(mif_mux_clks); + cmu.div_clks = mif_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(mif_div_clks); + cmu.gate_clks = mif_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(mif_gate_clks); + cmu.nr_clk_ids = MIF_NR_CLK; + cmu.clk_regs = mif_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif", + exynos5260_clk_mif_init); + + +/* CMU_PERI */ + +static unsigned long peri_clk_regs[] __initdata = { + MUX_SEL_PERI, + MUX_SEL_PERI1, + DIV_PERI, + EN_PCLK_PERI0, + EN_PCLK_PERI1, + EN_PCLK_PERI2, + EN_PCLK_PERI3, + EN_PCLK_PERI_SECURE_CHIPID, + EN_PCLK_PERI_SECURE_PROVKEY0, + EN_PCLK_PERI_SECURE_PROVKEY1, + EN_PCLK_PERI_SECURE_SECKEY, + EN_PCLK_PERI_SECURE_ANTIRBKCNT, + EN_PCLK_PERI_SECURE_TOP_RTC, + EN_PCLK_PERI_SECURE_TZPC, + EN_SCLK_PERI, + EN_SCLK_PERI_SECURE_TOP_RTC, + EN_IP_PERI0, + EN_IP_PERI1, + EN_IP_PERI2, + EN_IP_PERI_SECURE_CHIPID, + EN_IP_PERI_SECURE_PROVKEY0, + EN_IP_PERI_SECURE_PROVKEY1, + EN_IP_PERI_SECURE_SECKEY, + EN_IP_PERI_SECURE_ANTIRBKCNT, + EN_IP_PERI_SECURE_TOP_RTC, + EN_IP_PERI_SECURE_TZPC, +}; + +PNAME(mout_sclk_pcm_p) = {"ioclk_pcm_extclk", "fin_pll", "dout_aclk_peri_aud", + "phyclk_hdmi_phy_ref_cko"}; +PNAME(mout_sclk_i2scod_p) = {"ioclk_i2s_cdclk", "fin_pll", "dout_aclk_peri_aud", + "phyclk_hdmi_phy_ref_cko"}; +PNAME(mout_sclk_spdif_p) = {"ioclk_spdif_extclk", "fin_pll", + "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"}; + +struct samsung_mux_clock peri_mux_clks[] __initdata = { + MUX(0, "mout_sclk_spdif", mout_sclk_spdif_p, + MUX_SEL_PERI1, 20, 2), + MUX(0, "mout_sclk_i2scod", mout_sclk_i2scod_p, + MUX_SEL_PERI1, 12, 2), + MUX(0, "mout_sclk_pcm", mout_sclk_pcm_p, + MUX_SEL_PERI1, 4, 2), +}; + +struct samsung_div_clock peri_div_clks[] __initdata = { + DIV(0, "dout_i2s", "mout_sclk_i2scod", DIV_PERI, 0, 6), + DIV(0, "dout_pcm", "mout_sclk_pcm", DIV_PERI, 0, 8), +}; + +struct samsung_gate_clock peri_gate_clks[] __initdata = { + GATE(PERI_CLK_WDT_KFC, "clk_wdt_kfc", "dout_aclk_peri_66", + EN_IP_PERI0, 25, 0, 0), + GATE(PERI_CLK_WDT_EGL, "clk_wdt_egl", "dout_aclk_peri_66", + EN_IP_PERI0, 24, 0, 0), + GATE(PERI_CLK_HSIC3, "clk_hsic3", "dout_aclk_peri_66", + EN_IP_PERI0, 23, 0, 0), + GATE(PERI_CLK_HSIC2, "clk_hsic2", "dout_aclk_peri_66", + EN_IP_PERI0, 22, 0, 0), + GATE(PERI_CLK_HSIC1, "clk_hsic1", "dout_aclk_peri_66", + EN_IP_PERI0, 21, 0, 0), + GATE(PERI_CLK_HSIC0, "clk_hsic0", "dout_aclk_peri_66", + EN_IP_PERI0, 20, 0, 0), + GATE(PERI_CLK_PCM, "clk_peri_pcm", "dout_aclk_peri_66", + EN_IP_PERI0, 18, 0, 0), + GATE(PERI_CLK_MCT, "clk_mct", "dout_aclk_peri_66", + EN_IP_PERI0, 17, 0, 0), + GATE(PERI_CLK_I2S, "clk_peri_i2s", "dout_aclk_peri_66", + EN_IP_PERI0, 16, 0, 0), + GATE(PERI_CLK_I2CHDMI, "clk_i2chdmi", "dout_aclk_peri_66", + EN_IP_PERI0, 15, 0, 0), + GATE(PERI_CLK_I2C7, "clk_i2c7", "dout_aclk_peri_66", + EN_IP_PERI0, 14, 0, 0), + GATE(PERI_CLK_I2C6, "clk_i2c6", "dout_aclk_peri_66", + EN_IP_PERI0, 13, 0, 0), + GATE(PERI_CLK_I2C5, "clk_i2c5", "dout_aclk_peri_66", + EN_IP_PERI0, 12, 0, 0), + GATE(PERI_CLK_I2C4, "clk_i2c4", "dout_aclk_peri_66", + EN_IP_PERI0, 11, 0, 0), + GATE(PERI_CLK_I2C9, "clk_i2c9", "dout_aclk_peri_66", + EN_IP_PERI0, 10, 0, 0), + GATE(PERI_CLK_I2C8, "clk_i2c8", "dout_aclk_peri_66", + EN_IP_PERI0, 9, 0, 0), + GATE(PERI_CLK_I2C11, "clk_i2c11", "dout_aclk_peri_66", + EN_IP_PERI0, 8, 0, 0), + GATE(PERI_CLK_I2C10, "clk_i2c10", "dout_aclk_peri_66", + EN_IP_PERI0, 7, 0, 0), + GATE(PERI_CLK_HDMICEC, "clk_hdmicec", "dout_aclk_peri_66", + EN_IP_PERI0, 6, 0, 0), + GATE(PERI_CLK_EFUSE_WRITER, "clk_efuse_writer", "dout_aclk_peri_66", + EN_IP_PERI0, 5, 0, 0), + GATE(PERI_CLK_ABB, "clk_abb", "dout_aclk_peri_66", + EN_IP_PERI0, 1, 0, 0), + + GATE(PERI_CLK_UART2, "clk_uart2", "dout_aclk_peri_66", + EN_IP_PERI2, 21, 0, 0), + GATE(PERI_CLK_UART1, "clk_uart1", "dout_aclk_peri_66", + EN_IP_PERI2, 20, 0, 0), + GATE(PERI_CLK_UART0, "clk_uart0", "dout_aclk_peri_66", + EN_IP_PERI2, 19, 0, 0), + GATE(PERI_CLK_ADC, "clk_adc", "dout_aclk_peri_66", + EN_IP_PERI2, 18, 0, 0), + GATE(PERI_CLK_TMU4, "clk_tmu4", "dout_aclk_peri_66", + EN_IP_PERI2, 14, 0, 0), + GATE(PERI_CLK_TMU3, "clk_tmu3", "dout_aclk_peri_66", + EN_IP_PERI2, 13, 0, 0), + GATE(PERI_CLK_TMU2, "clk_tmu2", "dout_aclk_peri_66", + EN_IP_PERI2, 12, 0, 0), + GATE(PERI_CLK_TMU1, "clk_tmu1", "dout_aclk_peri_66", + EN_IP_PERI2, 11, 0, 0), + GATE(PERI_CLK_TMU0, "clk_tmu0", "dout_aclk_peri_66", + EN_IP_PERI2, 10, 0, 0), + GATE(PERI_CLK_SPI2, "clk_spi2", "dout_aclk_peri_66", + EN_IP_PERI2, 9, 0, 0), + GATE(PERI_CLK_SPI1, "clk_spi1", "dout_aclk_peri_66", + EN_IP_PERI2, 8, 0, 0), + GATE(PERI_CLK_SPI0, "clk_spi0", "dout_aclk_peri_66", + EN_IP_PERI2, 7, 0, 0), + GATE(PERI_CLK_SPDIF, "clk_spdif", "dout_aclk_peri_66", + EN_IP_PERI2, 6, 0, 0), + GATE(PERI_CLK_PWM, "clk_pwm", "dout_aclk_peri_66", + EN_IP_PERI2, 3, 0, 0), + GATE(PERI_CLK_UART4, "clk_uart4", "dout_aclk_peri_66", + EN_IP_PERI2, 0, 0, 0), + + GATE(PERI_CLK_CHIPID, "clk_chipid", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_CHIPID, 2, 0, 0), + GATE(PERI_CLK_PROVKEY0, "clk_provkey0", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_PROVKEY0, 1, 0, 0), + GATE(PERI_CLK_PROVKEY1, "clk_provkey1", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_PROVKEY1, 2, 0, 0), + GATE(PERI_CLK_SECKEY, "clk_seckey", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_SECKEY, 5, 0, 0), + GATE(PERI_CLK_TOP_RTC, "clk_top_rtc", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TOP_RTC, 5, 0, 0), + + GATE(PERI_CLK_TZPC10, "clk_tzpc10", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 20, 0, 0), + GATE(PERI_CLK_TZPC9, "clk_tzpc9", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 19, 0, 0), + GATE(PERI_CLK_TZPC8, "clk_tzpc8", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 18, 0, 0), + GATE(PERI_CLK_TZPC7, "clk_tzpc7", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 17, 0, 0), + GATE(PERI_CLK_TZPC6, "clk_tzpc6", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 16, 0, 0), + GATE(PERI_CLK_TZPC5, "clk_tzpc5", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 15, 0, 0), + GATE(PERI_CLK_TZPC4, "clk_tzpc4", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 14, 0, 0), + GATE(PERI_CLK_TZPC3, "clk_tzpc3", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 13, 0, 0), + GATE(PERI_CLK_TZPC2, "clk_tzpc2", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 12, 0, 0), + GATE(PERI_CLK_TZPC1, "clk_tzpc1", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 11, 0, 0), + GATE(PERI_CLK_TZPC0, "clk_tzpc0", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 10, 0, 0), + + GATE(PERI_SCLK_UART2, "sclk_uart2", "dout_sclk_peri_uart2", + EN_SCLK_PERI, 12, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_UART1, "sclk_uart1", "dout_sclk_peri_uart1", + EN_SCLK_PERI, 11, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_UART0, "sclk_uart0", "dout_sclk_peri_uart0", + EN_SCLK_PERI, 10, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI2, "sclk_spi2", "dout_sclk_peri_spi2_b", + EN_SCLK_PERI, 9, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI1, "sclk_spi1", "dout_sclk_peri_spi1_b", + EN_SCLK_PERI, 8, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI0, "sclk_spi0", "dout_sclk_peri_spi0_b", + EN_SCLK_PERI, 7, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPDIF, "sclk_spdif", "dout_sclk_peri_spi0_b", + EN_SCLK_PERI, 2, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_I2S, "sclk_i2s", "dout_i2s", EN_SCLK_PERI, 1, + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_PCM1, "sclk_pcm1", "dout_pcm", EN_SCLK_PERI, 0, + CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_peri_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = peri_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks); + cmu.div_clks = peri_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(peri_div_clks); + cmu.gate_clks = peri_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(peri_gate_clks); + cmu.nr_clk_ids = PERI_NR_CLK; + cmu.clk_regs = peri_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri", + exynos5260_clk_peri_init); + + +/* CMU_TOP */ + +static unsigned long top_clk_regs[] __initdata = { + DISP_PLL_LOCK, + AUD_PLL_LOCK, + DISP_PLL_CON0, + DISP_PLL_CON1, + DISP_PLL_FDET, + AUD_PLL_CON0, + AUD_PLL_CON1, + AUD_PLL_CON2, + AUD_PLL_FDET, + MUX_SEL_TOP_PLL0, + MUX_SEL_TOP_MFC, + MUX_SEL_TOP_G2D, + MUX_SEL_TOP_GSCL, + MUX_SEL_TOP_ISP10, + MUX_SEL_TOP_ISP11, + MUX_SEL_TOP_DISP0, + MUX_SEL_TOP_DISP1, + MUX_SEL_TOP_BUS, + MUX_SEL_TOP_PERI0, + MUX_SEL_TOP_PERI1, + MUX_SEL_TOP_FSYS, + DIV_TOP_G2D_MFC, + DIV_TOP_GSCL_ISP0, + DIV_TOP_ISP10, + DIV_TOP_ISP11, + DIV_TOP_DISP, + DIV_TOP_BUS, + DIV_TOP_PERI0, + DIV_TOP_PERI1, + DIV_TOP_PERI2, + DIV_TOP_FSYS0, + DIV_TOP_FSYS1, + DIV_TOP_HPM, + DIV_TOP_PLL_FDET, + EN_ACLK_TOP, + EN_SCLK_TOP, + EN_IP_TOP, +}; + +PNAME(mout_memtop_pll_user_p) = {"fin_pll", "dout_mem_pll"}; +PNAME(mout_bustop_pll_user_p) = {"fin_pll", "dout_bus_pll"}; +PNAME(mout_mediatop_pll_user_p) = {"fin_pll", "dout_media_pll"}; +PNAME(mout_audtop_pll_user_p) = {"fin_pll", "mout_aud_pll"}; +PNAME(mout_aud_pll_p) = {"fin_pll", "fout_aud_pll"}; +PNAME(mout_disp_pll_p) = {"fin_pll", "fout_disp_pll"}; + +PNAME(mout_mfc_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_mfc_333_p) = {"mout_mediatop_pll_user", "mout_mfc_bustop_333"}; + +PNAME(mout_g2d_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_g2d_333_p) = {"mout_mediatop_pll_user", "mout_g2d_bustop_333"}; + +PNAME(mout_gscl_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_333_p) = {"mout_mediatop_pll_user", + "mout_gscl_bustop_333"}; +PNAME(mout_m2m_mediatop_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_400_p) = {"mout_bustop_pll_user", + "mout_m2m_mediatop_400"}; +PNAME(mout_gscl_bustop_fimc_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_fimc_p) = {"mout_mediatop_pll_user", + "mout_gscl_bustop_fimc"}; + +PNAME(mout_isp1_media_266_p) = {"mout_mediatop_pll_user", + "mout_memtop_pll_user"}; +PNAME(mout_aclk_isp1_266_p) = {"mout_bustop_pll_user", "mout_isp1_media_266"}; +PNAME(mout_isp1_media_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_isp1_400_p) = {"mout_bustop_pll_user", "mout_isp1_media_400"}; + +PNAME(mout_sclk_isp_spi_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_isp_uart_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_isp_sensor_p) = {"fin_pll", "mout_bustop_pll_user"}; + +PNAME(mout_disp_disp_333_p) = {"mout_disp_pll", "mout_bustop_pll_user"}; +PNAME(mout_aclk_disp_333_p) = {"mout_mediatop_pll_user", "mout_disp_disp_333"}; +PNAME(mout_disp_disp_222_p) = {"mout_disp_pll", "mout_bustop_pll_user"}; +PNAME(mout_aclk_disp_222_p) = {"mout_mediatop_pll_user", "mout_disp_disp_222"}; +PNAME(mout_disp_media_pixel_p) = {"mout_mediatop_pll_user", + "mout_bustop_pll_user"}; +PNAME(mout_sclk_disp_pixel_p) = {"mout_disp_pll", "mout_disp_media_pixel"}; + +PNAME(mout_bus_bustop_400_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"}; +PNAME(mout_bus_bustop_100_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"}; + +PNAME(mout_sclk_peri_spi_clk_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_peri_uart_uclk_p) = {"fin_pll", "mout_bustop_pll_user"}; + +PNAME(mout_sclk_fsys_usb_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_fsys_mmc_sdclkin_a_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_fsys_mmc0_sdclkin_b_p) = {"mout_sclk_fsys_mmc0_sdclkin_a", + "mout_mediatop_pll_user"}; +PNAME(mout_sclk_fsys_mmc1_sdclkin_b_p) = {"mout_sclk_fsys_mmc1_sdclkin_a", + "mout_mediatop_pll_user"}; +PNAME(mout_sclk_fsys_mmc2_sdclkin_b_p) = {"mout_sclk_fsys_mmc2_sdclkin_a", + "mout_mediatop_pll_user"}; + +struct samsung_fixed_rate_clock fixed_rate_ext_clks[] __initdata = { + FRATE(FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0), +}; + +struct samsung_mux_clock top_mux_clks[] __initdata = { + MUX(0, "mout_audtop_pll_user", mout_audtop_pll_user_p, + MUX_SEL_TOP_PLL0, 24, 1), + MUX(0, "mout_aud_pll", mout_aud_pll_p, MUX_SEL_TOP_PLL0, 16, 1), + MUX(TOP_MOUT_DISP_PLL, "mout_disp_pll", mout_disp_pll_p, + MUX_SEL_TOP_PLL0, 12, 1), + MUX(0, "mout_bustop_pll_user", mout_bustop_pll_user_p, + MUX_SEL_TOP_PLL0, 8, 1), + MUX(0, "mout_memtop_pll_user", mout_memtop_pll_user_p, + MUX_SEL_TOP_PLL0, 4, 1), + MUX(0, "mout_mediatop_pll_user", mout_mediatop_pll_user_p, + MUX_SEL_TOP_PLL0, 0, 1), + + + MUX(0, "mout_disp_disp_333", mout_disp_disp_333_p, + MUX_SEL_TOP_DISP0, 0, 1), + MUX(0, "mout_aclk_disp_333", mout_aclk_disp_333_p, + MUX_SEL_TOP_DISP0, 8, 1), + MUX(0, "mout_disp_disp_222", mout_disp_disp_222_p, + MUX_SEL_TOP_DISP0, 12, 1), + MUX(0, "mout_aclk_disp_222", mout_aclk_disp_222_p, + MUX_SEL_TOP_DISP0, 20, 1), + MUX(0, "mout_disp_media_pixel", mout_disp_media_pixel_p, + MUX_SEL_TOP_DISP1, 8, 1), + MUX(TOP_MOUT_FIMD1, "mout_sclk_disp_pixel", mout_sclk_disp_pixel_p, + MUX_SEL_TOP_DISP1, 0, 1), + + MUX(0, "mout_sclk_peri_spi0_clk", mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 8, 1), + MUX(0, "mout_sclk_peri_spi1_clk", mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 4, 1), + MUX(0, "mout_sclk_peri_spi2_clk", mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 0, 1), + MUX(0, "mout_sclk_peri_uart0_uclk", mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 20, 1), + MUX(0, "mout_sclk_peri_uart2_uclk", mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 16, 1), + MUX(0, "mout_sclk_peri_uart1_uclk", mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 12, 1), + + MUX(0, "mout_bus4_bustop_100", mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 28, 1), + MUX(0, "mout_bus4_bustop_400", mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 24, 1), + MUX(0, "mout_bus3_bustop_100", mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 20, 1), + MUX(0, "mout_bus3_bustop_400", mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 16, 1), + MUX(0, "mout_bus2_bustop_400", mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 12, 1), + MUX(0, "mout_bus2_bustop_100", mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 8, 1), + MUX(0, "mout_bus1_bustop_100", mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 4, 1), + MUX(0, "mout_bus1_bustop_400", mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 0, 1), + + MUX(0, "mout_sclk_fsys_usb", mout_sclk_fsys_usb_p, + MUX_SEL_TOP_FSYS, 0, 1), + MUX(0, "mout_sclk_fsys_mmc0_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 20, 1), + MUX(0, "mout_sclk_fsys_mmc1_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 12, 1), + MUX(0, "mout_sclk_fsys_mmc2_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 4, 1), + MUX(0, "mout_sclk_fsys_mmc0_sdclkin_b", + mout_sclk_fsys_mmc0_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 24, 1), + MUX(0, "mout_sclk_fsys_mmc1_sdclkin_b", + mout_sclk_fsys_mmc1_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 16, 1), + MUX(0, "mout_sclk_fsys_mmc2_sdclkin_b", + mout_sclk_fsys_mmc2_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 8, 1), + + MUX(0, "mout_aclk_isp1_266", mout_aclk_isp1_266_p, + MUX_SEL_TOP_ISP10, 20, 1), + MUX(0, "mout_isp1_media_266", mout_isp1_media_266_p, + MUX_SEL_TOP_ISP10, 16, 1), + MUX(0, "mout_aclk_isp1_400", mout_aclk_isp1_400_p, + MUX_SEL_TOP_ISP10, 8 , 1), + MUX(0, "mout_isp1_media_400", mout_isp1_media_400_p, + MUX_SEL_TOP_ISP10, 4, 1), + + MUX(0, "mout_sclk_isp1_spi0", mout_sclk_isp_spi_p, + MUX_SEL_TOP_ISP11, 4, 1), + MUX(0, "mout_sclk_isp1_spi1", mout_sclk_isp_spi_p, + MUX_SEL_TOP_ISP11, 8, 1), + MUX(0, "mout_sclk_isp1_uart", mout_sclk_isp_uart_p, + MUX_SEL_TOP_ISP11, 12, 1), + MUX(0, "mout_sclk_isp1_sensor2", mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 24, 1), + MUX(0, "mout_sclk_isp1_sensor1", mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 20, 1), + MUX(0, "mout_sclk_isp1_sensor0", mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 16, 1), + + MUX(0, "mout_aclk_mfc_333", mout_aclk_mfc_333_p, + MUX_SEL_TOP_MFC, 8, 1), + MUX(0, "mout_mfc_bustop_333", mout_mfc_bustop_333_p, + MUX_SEL_TOP_MFC, 4, 1), + + MUX(0, "mout_aclk_g2d_333", mout_aclk_g2d_333_p, + MUX_SEL_TOP_G2D, 8, 1), + MUX(0, "mout_g2d_bustop_333", mout_g2d_bustop_333_p, + MUX_SEL_TOP_G2D, 4, 1), + + MUX(0, "mout_aclk_gscl_fimc", mout_aclk_gscl_fimc_p, + MUX_SEL_TOP_GSCL, 20, 1), + MUX(0, "mout_gscl_bustop_fimc", mout_gscl_bustop_fimc_p, + MUX_SEL_TOP_GSCL, 16, 1), + MUX(0, "mout_aclk_gscl_333", mout_aclk_gscl_333_p, + MUX_SEL_TOP_GSCL, 12, 1), + MUX(0, "mout_gscl_bustop_333", mout_gscl_bustop_333_p, + MUX_SEL_TOP_GSCL, 8, 1), + MUX(0, "mout_aclk_gscl_400", mout_aclk_gscl_400_p, + MUX_SEL_TOP_GSCL, 4, 1), + MUX(0, "mout_m2m_mediatop_400", mout_m2m_mediatop_400_p, + MUX_SEL_TOP_GSCL, 0, 1), +}; + +struct samsung_div_clock top_div_clks[] __initdata = { + DIV(0, "dout_aclk_mfc_333", "mout_aclk_mfc_333", + DIV_TOP_G2D_MFC, 4, 3), + + DIV(0, "dout_aclk_g2d_333", "mout_aclk_g2d_333", + DIV_TOP_GSCL_ISP0, 0, 3), + + DIV(0, "dout_sclk_isp1_sensor2_a", "mout_aclk_gscl_fimc", + DIV_TOP_GSCL_ISP0, 24, 4), + DIV(0, "dout_sclk_isp1_sensor1_a", "mout_aclk_gscl_400", + DIV_TOP_GSCL_ISP0, 20, 4), + DIV(0, "dout_sclk_isp1_sensor0_a", "mout_aclk_gscl_fimc", + DIV_TOP_GSCL_ISP0, 16, 4), + DIV(0, "dout_aclk_gscl_fimc", "mout_aclk_gscl_fimc", + DIV_TOP_GSCL_ISP0, 8, 3), + DIV(0, "dout_aclk_gscl_400", "mout_aclk_gscl_400", + DIV_TOP_GSCL_ISP0, 4, 3), + DIV(0, "dout_aclk_gscl_333", "mout_aclk_gscl_333", + DIV_TOP_GSCL_ISP0, 0, 3), + + DIV(0, "dout_sclk_isp1_spi0_b", "dout_sclk_isp1_spi0_a", + DIV_TOP_ISP10, 16, 8), + DIV(0, "dout_sclk_isp1_spi0_a", "mout_sclk_isp1_spi0", + DIV_TOP_ISP10, 12, 4), + DIV(0, "dout_aclk_isp1_400", "mout_aclk_isp1_400", + DIV_TOP_ISP10, 4, 3), + DIV(0, "dout_aclk_isp1_266", "mout_aclk_isp1_266", + DIV_TOP_ISP10, 0, 3), + DIV(0, "dout_sclk_isp1_uart", "mout_sclk_isp1_uart", + DIV_TOP_ISP11, 12, 4), + DIV(0, "dout_sclk_isp1_spi1_b", "dout_sclk_isp1_spi1_a", + DIV_TOP_ISP11, 4, 8), + DIV(0, "dout_sclk_isp1_spi1_a", "mout_sclk_isp1_spi1", + DIV_TOP_ISP11, 0, 4), + DIV(0, "dout_sclk_isp1_sensor2_b", "dout_sclk_isp1_sensor2_a", + DIV_TOP_ISP11, 24, 4), + DIV(0, "dout_sclk_isp1_sensor1_b", "dout_sclk_isp1_sensor1_a", + DIV_TOP_ISP11, 20, 4), + DIV(0, "dout_sclk_isp1_sensor0_b", "dout_sclk_isp1_sensor0_a", + DIV_TOP_ISP11, 16, 4), + + DIV(0, "dout_sclk_hpm_targetclk", "mout_bustop_pll_user", + DIV_TOP_HPM, 0, 3), + + DIV(0, "dout_sclk_disp_pixel", "mout_sclk_disp_pixel", + DIV_TOP_DISP, 8, 3), + DIV(0, "dout_aclk_disp_222", "mout_aclk_disp_222", + DIV_TOP_DISP, 4, 3), + DIV(0, "dout_aclk_disp_333", "mout_aclk_disp_333", + DIV_TOP_DISP, 0, 3), + + DIV(0, "dout_aclk_bus4_100", "mout_bus4_bustop_100", + DIV_TOP_BUS, 28, 4), + DIV(0, "dout_aclk_bus4_400", "mout_bus4_bustop_400", + DIV_TOP_BUS, 24, 3), + DIV(0, "dout_aclk_bus3_100", "mout_bus3_bustop_100", + DIV_TOP_BUS, 20, 4), + DIV(0, "dout_aclk_bus3_400", "mout_bus3_bustop_400", + DIV_TOP_BUS, 16, 3), + DIV(0, "dout_aclk_bus2_100", "mout_bus2_bustop_100", + DIV_TOP_BUS, 12, 4), + DIV(0, "dout_aclk_bus2_400", "mout_bus2_bustop_400", + DIV_TOP_BUS, 8, 3), + DIV(0, "dout_aclk_bus1_100", "mout_bus1_bustop_100", + DIV_TOP_BUS, 4, 4), + DIV(0, "dout_aclk_bus1_400", "mout_bus1_bustop_400", + DIV_TOP_BUS, 0, 3), + + DIV(0, "dout_sclk_peri_spi1_b", "dout_sclk_peri_spi1_a", + DIV_TOP_PERI0, 20, 8), + DIV(0, "dout_sclk_peri_spi1_a", "mout_sclk_peri_spi1_clk", + DIV_TOP_PERI0, 16, 4), + DIV(0, "dout_sclk_peri_spi0_b", "dout_sclk_peri_spi0_a", + DIV_TOP_PERI0, 8, 8), + DIV(0, "dout_sclk_peri_spi0_a", "mout_sclk_peri_spi0_clk", + DIV_TOP_PERI0, 4, 4), + DIV(0, "dout_sclk_peri_uart0", "mout_sclk_peri_uart0_uclk", + DIV_TOP_PERI1, 24, 4), + DIV(0, "dout_sclk_peri_uart2", "mout_sclk_peri_uart2_uclk", + DIV_TOP_PERI1, 20, 4), + DIV(0, "dout_sclk_peri_uart1", "mout_sclk_peri_uart1_uclk", + DIV_TOP_PERI1, 16, 4), + DIV(0, "dout_sclk_peri_spi2_b", "dout_sclk_peri_spi2_a", + DIV_TOP_PERI1, 4, 8), + DIV(0, "dout_sclk_peri_spi2_a", "mout_sclk_peri_spi2_clk", + DIV_TOP_PERI1, 0, 4), + DIV(0, "dout_aclk_peri_aud", "mout_audtop_pll_user", + DIV_TOP_PERI2, 24, 3), + DIV(0, "dout_aclk_peri_66", "mout_bustop_pll_user", + DIV_TOP_PERI2, 20, 4), + + DIV(0, "dout_sclk_fsys_mmc0_sdclkin_b", + "dout_sclk_fsys_mmc0_sdclkin_a", + DIV_TOP_FSYS0, 16, 8), + DIV(0, "dout_sclk_fsys_mmc0_sdclkin_a", + "mout_sclk_fsys_mmc0_sdclkin_b", + DIV_TOP_FSYS0, 12, 4), + DIV(0, "dout_sclk_fsys_usbdrd30_suspend_clk", + "mout_sclk_fsys_usb", + DIV_TOP_FSYS0, 4, 4), + DIV(0, "dout_aclk_fsys_200", "mout_bustop_pll_user", + DIV_TOP_FSYS0, 0, 3), + + DIV(0, "dout_sclk_fsys_mmc2_sdclkin_b", + "dout_sclk_fsys_mmc2_sdclkin_a", + DIV_TOP_FSYS1, 16, 8), + DIV(0, "dout_sclk_fsys_mmc2_sdclkin_a", + "mout_sclk_fsys_mmc2_sdclkin_b", + DIV_TOP_FSYS1, 12, 4), + DIV(0, "dout_sclk_fsys_mmc1_sdclkin_b", + "dout_sclk_fsys_mmc1_sdclkin_a", + DIV_TOP_FSYS1, 4, 8), + DIV(0, "dout_sclk_fsys_mmc1_sdclkin_a", + "mout_sclk_fsys_mmc1_sdclkin_b", + DIV_TOP_FSYS1, 0, 4), +}; + +struct samsung_gate_clock top_gate_clks[] __initdata = { + GATE(TOP_SCLK_FIMD1, "sclk_disp_pixel", "dout_sclk_disp_pixel", + EN_ACLK_TOP, 10, CLK_SET_RATE_PARENT, 0), + GATE(TOP_SCLK_MMC2, "sclk_fsys_mmc2_sdclkin", + "dout_sclk_fsys_mmc2_sdclkin_b", + EN_SCLK_TOP, 9, CLK_SET_RATE_PARENT, 0), + GATE(TOP_SCLK_MMC1, "sclk_fsys_mmc1_sdclkin", + "dout_sclk_fsys_mmc1_sdclkin_b", + EN_SCLK_TOP, 8, CLK_SET_RATE_PARENT, + 0), + GATE(TOP_SCLK_MMC0, "sclk_fsys_mmc0_sdclkin", + "dout_sclk_fsys_mmc0_sdclkin_b", + EN_SCLK_TOP, 7, CLK_SET_RATE_PARENT, 0), +}; + + + +static struct samsung_pll_clock top_pll_clks[] __initdata = { + PLL(pll_2550xx, TOP_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll", + DISP_PLL_LOCK, DISP_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2650xx, TOP_FOUT_AUD_PLL, "fout_aud_pll", "fin_pll", + AUD_PLL_LOCK, AUD_PLL_CON0, + pll2650_24mhz_tbl), +}; + +static void __init exynos5260_clk_top_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + struct samsung_clk_provider *ctx; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = top_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); + cmu.mux_clks = top_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); + cmu.div_clks = top_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); + cmu.gate_clks = top_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); + cmu.nr_clk_ids = TOP_NR_CLK; + cmu.clk_regs = top_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); + + ctx = exynos5260_cmu_register_one(np, &cmu); + + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, + ARRAY_SIZE(fixed_rate_ext_clks), + ext_clk_match); +} + +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", + exynos5260_clk_top_init); diff --git a/drivers/clk/samsung/clk-exynos5260.h b/drivers/clk/samsung/clk-exynos5260.h new file mode 100644 index 0000000..7c3717a --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5260.h @@ -0,0 +1,448 @@ +#ifndef __CLK_EXYNOS5260_H +#define __CLK_EXYNOS5260_H + +/* +*Registers for CMU_AUD +*/ +#define MUX_SEL_AUD 0x0200 +#define MUX_ENABLE_AUD 0x0300 +#define MUX_STAT_AUD 0x0400 +#define MUX_IGNORE_AUD 0x0500 +#define DIV_AUD0 0x0600 +#define DIV_AUD1 0x0604 +#define DIV_STAT_AUD0 0x0700 +#define DIV_STAT_AUD1 0x0704 +#define EN_ACLK_AUD 0x0800 +#define EN_PCLK_AUD 0x0900 +#define EN_SCLK_AUD 0x0a00 +#define EN_IP_AUD 0x0b00 + +/* +*Registers for CMU_DISP +*/ +#define MUX_SEL_DISP0 0x0200 +#define MUX_SEL_DISP1 0x0204 +#define MUX_SEL_DISP2 0x0208 +#define MUX_SEL_DISP3 0x020C +#define MUX_SEL_DISP4 0x0210 +#define MUX_ENABLE_DISP0 0x0300 +#define MUX_ENABLE_DISP1 0x0304 +#define MUX_ENABLE_DISP2 0x0308 +#define MUX_ENABLE_DISP3 0x030c +#define MUX_ENABLE_DISP4 0x0310 +#define MUX_STAT_DISP0 0x0400 +#define MUX_STAT_DISP1 0x0404 +#define MUX_STAT_DISP2 0x0408 +#define MUX_STAT_DISP3 0x040c +#define MUX_STAT_DISP4 0x0410 +#define MUX_IGNORE_DISP0 0x0500 +#define MUX_IGNORE_DISP1 0x0504 +#define MUX_IGNORE_DISP2 0x0508 +#define MUX_IGNORE_DISP3 0x050c +#define MUX_IGNORE_DISP4 0x0510 +#define DIV_DISP 0x0600 +#define DIV_STAT_DISP 0x0700 +#define EN_ACLK_DISP 0x0800 +#define EN_PCLK_DISP 0x0900 +#define EN_SCLK_DISP0 0x0a00 +#define EN_SCLK_DISP1 0x0a04 +#define EN_IP_DISP 0x0b00 +#define EN_IP_DISP_BUS 0x0b04 + + +/* +*Registers for CMU_EGL +*/ +#define EGL_PLL_LOCK 0x0000 +#define EGL_DPLL_LOCK 0x0004 +#define EGL_PLL_CON0 0x0100 +#define EGL_PLL_CON1 0x0104 +#define EGL_PLL_FREQ_DET 0x010c +#define EGL_DPLL_CON0 0x0110 +#define EGL_DPLL_CON1 0x0114 +#define EGL_DPLL_FREQ_DET 0x011c +#define MUX_SEL_EGL 0x0200 +#define MUX_ENABLE_EGL 0x0300 +#define MUX_STAT_EGL 0x0400 +#define DIV_EGL 0x0600 +#define DIV_EGL_PLL_FDET 0x0604 +#define DIV_STAT_EGL 0x0700 +#define DIV_STAT_EGL_PLL_FDET 0x0704 +#define EN_ACLK_EGL 0x0800 +#define EN_PCLK_EGL 0x0900 +#define EN_SCLK_EGL 0x0a00 +#define EN_IP_EGL 0x0b00 +#define CLKOUT_CMU_EGL 0x0c00 +#define CLKOUT_CMU_EGL_DIV_STAT 0x0c04 +#define ARMCLK_STOPCTRL 0x1000 +#define EAGLE_EMA_CTRL 0x1008 +#define EAGLE_EMA_STATUS 0x100c +#define PWR_CTRL 0x1020 +#define PWR_CTRL2 0x1024 +#define CLKSTOP_CTRL 0x1028 +#define INTR_SPREAD_EN 0x1080 +#define INTR_SPREAD_USE_STANDBYWFI 0x1084 +#define INTR_SPREAD_BLOCKING_DURATION 0x1088 +#define CMU_EGL_SPARE0 0x2000 +#define CMU_EGL_SPARE1 0x2004 +#define CMU_EGL_SPARE2 0x2008 +#define CMU_EGL_SPARE3 0x200c +#define CMU_EGL_SPARE4 0x2010 + +/* +*Registers for CMU_FSYS +*/ + +#define MUX_SEL_FSYS0 0x0200 +#define MUX_SEL_FSYS1 0x0204 +#define MUX_ENABLE_FSYS0 0x0300 +#define MUX_ENABLE_FSYS1 0x0304 +#define MUX_STAT_FSYS0 0x0400 +#define MUX_STAT_FSYS1 0x0404 +#define MUX_IGNORE_FSYS0 0x0500 +#define MUX_IGNORE_FSYS1 0x0504 +#define EN_ACLK_FSYS 0x0800 +#define EN_ACLK_FSYS_SECURE_RTIC 0x0804 +#define EN_ACLK_FSYS_SECURE_SMMU_RTIC 0x0808 +#define EN_PCLK_FSYS 0x0900 +#define EN_SCLK_FSYS 0x0a00 +#define EN_IP_FSYS 0x0b00 +#define EN_IP_FSYS_SECURE_RTIC 0x0b04 +#define EN_IP_FSYS_SECURE_SMMU_RTIC 0x0b08 + +/* +*Registers for CMU_G2D +*/ + +#define MUX_SEL_G2D 0x0200 +#define MUX_ENABLE_G2D 0x0300 +#define MUX_STAT_G2D 0x0400 +#define DIV_G2D 0x0600 +#define DIV_STAT_G2D 0x0700 +#define EN_ACLK_G2D 0x0800 +#define EN_ACLK_G2D_SECURE_SSS 0x0804 +#define EN_ACLK_G2D_SECURE_SLIM_SSS 0x0808 +#define EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS 0x080c +#define EN_ACLK_G2D_SECURE_SMMU_SSS 0x0810 +#define EN_ACLK_G2D_SECURE_SMMU_MDMA 0x0814 +#define EN_ACLK_G2D_SECURE_SMMU_G2D 0x0818 +#define EN_PCLK_G2D 0x0900 +#define EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS 0x0904 +#define EN_PCLK_G2D_SECURE_SMMU_SSS 0x0908 +#define EN_PCLK_G2D_SECURE_SMMU_MDMA 0x090c +#define EN_PCLK_G2D_SECURE_SMMU_G2D 0x0910 +#define EN_IP_G2D 0x0b00 +#define EN_IP_G2D_SECURE_SSS 0x0b04 +#define EN_IP_G2D_SECURE_SLIM_SSS 0x0b08 +#define EN_IP_G2D_SECURE_SMMU_SLIM_SSS 0x0b0c +#define EN_IP_G2D_SECURE_SMMU_SSS 0x0b10 +#define EN_IP_G2D_SECURE_SMMU_MDMA 0x0b14 +#define EN_IP_G2D_SECURE_SMMU_G2D 0x0b18 + +/* +*Registers for CMU_G3D +*/ + +#define G3D_PLL_LOCK 0x0000 +#define G3D_PLL_CON0 0x0100 +#define G3D_PLL_CON1 0x0104 +#define G3D_PLL_FDET 0x010c +#define MUX_SEL_G3D 0x0200 +#define MUX_EN_G3D 0x0300 +#define MUX_STAT_G3D 0x0400 +#define MUX_IGNORE_G3D 0x0500 +#define DIV_G3D 0x0600 +#define DIV_G3D_PLL_FDET 0x0604 +#define DIV_STAT_G3D 0x0700 +#define DIV_STAT_G3D_PLL_FDET 0x0704 +#define EN_ACLK_G3D 0x0800 +#define EN_PCLK_G3D 0x0900 +#define EN_SCLK_G3D 0x0a00 +#define EN_IP_G3D 0x0b00 +#define CLKOUT_CMU_G3D 0x0c00 +#define CLKOUT_CMU_G3D_DIV_STAT 0x0c04 +#define G3DCLK_STOPCTRL 0x1000 +#define G3D_EMA_CTRL 0x1008 +#define G3D_EMA_STATUS 0x100c + +/* +*Registers for CMU_GSCL +*/ + +#define MUX_SEL_GSCL 0x0200 +#define MUX_EN_GSCL 0x0300 +#define MUX_STAT_GSCL 0x0400 +#define MUX_IGNORE_GSCL 0x0500 +#define DIV_GSCL 0x0600 +#define DIV_STAT_GSCL 0x0700 +#define EN_ACLK_GSCL 0x0800 +#define EN_ACLK_GSCL_FIMC 0x0804 +#define EN_ACLK_GSCL_SECURE_SMMU_GSCL0 0x0808 +#define EN_ACLK_GSCL_SECURE_SMMU_GSCL1 0x080c +#define EN_ACLK_GSCL_SECURE_SMMU_MSCL0 0x0810 +#define EN_ACLK_GSCL_SECURE_SMMU_MSCL1 0x0814 +#define EN_PCLK_GSCL 0x0900 +#define EN_PCLK_GSCL_FIMC 0x0904 +#define EN_PCLK_GSCL_SECURE_SMMU_GSCL0 0x0908 +#define EN_PCLK_GSCL_SECURE_SMMU_GSCL1 0x090c +#define EN_PCLK_GSCL_SECURE_SMMU_MSCL0 0x0910 +#define EN_PCLK_GSCL_SECURE_SMMU_MSCL1 0x0914 +#define EN_SCLK_GSCL 0x0a00 +#define EN_SCLK_GSCL_FIMC 0x0a04 +#define EN_IP_GSCL 0x0b00 +#define EN_IP_GSCL_FIMC 0x0b04 +#define EN_IP_GSCL_SECURE_SMMU_GSCL0 0x0b08 +#define EN_IP_GSCL_SECURE_SMMU_GSCL1 0x0b0c +#define EN_IP_GSCL_SECURE_SMMU_MSCL0 0x0b10 +#define EN_IP_GSCL_SECURE_SMMU_MSCL1 0x0b14 + +/* +*Registers for CMU_ISP +*/ +#define MUX_SEL_ISP0 0x0200 +#define MUX_SEL_ISP1 0x0204 +#define MUX_ENABLE_ISP0 0x0300 +#define MUX_ENABLE_ISP1 0x0304 +#define MUX_STAT_ISP0 0x0400 +#define MUX_STAT_ISP1 0x0404 +#define MUX_IGNORE_ISP0 0x0500 +#define MUX_IGNORE_ISP1 0x0504 +#define DIV_ISP 0x0600 +#define DIV_STAT_ISP 0x0700 +#define EN_ACLK_ISP0 0x0800 +#define EN_ACLK_ISP1 0x0804 +#define EN_PCLK_ISP0 0x0900 +#define EN_PCLK_ISP1 0x0904 +#define EN_SCLK_ISP 0x0a00 +#define EN_IP_ISP0 0x0b00 +#define EN_IP_ISP1 0x0b04 + +/* +*Registers for CMU_KFC +*/ +#define KFC_PLL_LOCK 0x0000 +#define KFC_PLL_CON0 0x0100 +#define KFC_PLL_CON1 0x0104 +#define KFC_PLL_FDET 0x010c +#define MUX_SEL_KFC0 0x0200 +#define MUX_SEL_KFC2 0x0208 +#define MUX_ENABLE_KFC0 0x0300 +#define MUX_ENABLE_KFC2 0x0308 +#define MUX_STAT_KFC0 0x0400 +#define MUX_STAT_KFC2 0x0408 +#define DIV_KFC 0x0600 +#define DIV_KFC_PLL_FDET 0x0604 +#define DIV_STAT_KFC 0x0700 +#define DIV_STAT_KFC_PLL_FDET 0x0704 +#define EN_ACLK_KFC 0x0800 +#define EN_PCLK_KFC 0x0900 +#define EN_SCLK_KFC 0x0a00 +#define EN_IP_KFC 0x0b00 +#define CLKOUT_CMU_KFC 0x0c00 +#define CLKOUT_CMU_KFC_DIV_STAT 0x0c04 +#define ARMCLK_STOPCTRL_KFC 0x1000 +#define ARM_EMA_CTRL 0x1008 +#define ARM_EMA_STATUS 0x100c +#define PWR_CTRL_KFC 0x1020 +#define PWR_CTRL2_KFC 0x1024 +#define CLKSTOP_CTRL_KFC 0x1028 +#define INTR_SPREAD_ENABLE_KFC 0x1080 +#define INTR_SPREAD_USE_STANDBYWFI_KFC 0x1084 +#define INTR_SPREAD_BLOCKING_DURATION_KFC 0x1088 +#define CMU_KFC_SPARE0 0x2000 +#define CMU_KFC_SPARE1 0x2004 +#define CMU_KFC_SPARE2 0x2008 +#define CMU_KFC_SPARE3 0x200c +#define CMU_KFC_SPARE4 0x2010 + +/* +*Registers for CMU_MFC +*/ +#define MUX_SEL_MFC 0x0200 +#define MUX_ENABLE_MFC 0x0300 +#define MUX_STAT_MFC 0x0400 +#define DIV_MFC 0x0600 +#define DIV_STAT_MFC 0x0700 +#define EN_ACLK_MFC 0x0800 +#define EN_ACLK_SECURE_SMMU2_MFC 0x0804 +#define EN_PCLK_MFC 0x0900 +#define EN_PCLK_SECURE_SMMU2_MFC 0x0904 +#define EN_IP_MFC 0x0b00 +#define EN_IP_MFC_SECURE_SMMU2_MFC 0x0b04 + +/* +*Registers for CMU_MIF +*/ +#define MEM_PLL_LOCK 0x0000 +#define BUS_PLL_LOCK 0x0004 +#define MEDIA_PLL_LOCK 0x0008 +#define MEM_PLL_CON0 0x0100 +#define MEM_PLL_CON1 0x0104 +#define MEM_PLL_FDET 0x010c +#define BUS_PLL_CON0 0x0110 +#define BUS_PLL_CON1 0x0114 +#define BUS_PLL_FDET 0x011c +#define MEDIA_PLL_CON0 0x0120 +#define MEDIA_PLL_CON1 0x0124 +#define MEDIA_PLL_FDET 0x012c +#define MUX_SEL_MIF 0x0200 +#define MUX_ENABLE_MIF 0x0300 +#define MUX_STAT_MIF 0x0400 +#define MUX_IGNORE_MIF 0x0500 +#define DIV_MIF 0x0600 +#define DIV_MIF_PLL_FDET 0x0604 +#define DIV_STAT_MIF 0x0700 +#define DIV_STAT_MIF_PLL_FDET 0x0704 +#define EN_ACLK_MIF 0x0800 +#define EN_ACLK_MIF_SECURE_DREX1_TZ 0x0804 +#define EN_ACLK_MIF_SECURE_DREX0_TZ 0x0808 +#define EN_ACLK_MIF_SECURE_INTMEM 0x080c +#define EN_PCLK_MIF 0x0900 +#define EN_PCLK_MIF_SECURE_MONOCNT 0x0904 +#define EN_PCLK_MIF_SECURE_RTC_APBIF 0x0908 +#define EN_PCLK_MIF_SECURE_DREX1_TZ 0x090c +#define EN_PCLK_MIF_SECURE_DREX0_TZ 0x0910 +#define EN_SCLK_MIF 0x0a00 +#define EN_IP_MIF 0x0b00 +#define EN_IP_MIF_SECURE_MONOCNT 0x0b04 +#define EN_IP_MIF_SECURE_RTC_APBIF 0x0b08 +#define EN_IP_MIF_SECURE_DREX1_TZ 0x0b0c +#define EN_IP_MIF_SECURE_DREX0_TZ 0x0b10 +#define EN_IP_MIF_SECURE_INTEMEM 0x0b14 +#define CLKOUT_CMU_MIF_DIV_STAT 0x0c04 +#define DREX_FREQ_CTRL 0x1000 +#define PAUSE 0x1004 +#define DDRPHY_LOCK_CTRL 0x1008 +#define CLKOUT_CMU_MIF 0xcb00 + +/* +*Registers for CMU_PERI +*/ +#define MUX_SEL_PERI 0x0200 +#define MUX_SEL_PERI1 0x0204 +#define MUX_ENABLE_PERI 0x0300 +#define MUX_ENABLE_PERI1 0x0304 +#define MUX_STAT_PERI 0x0400 +#define MUX_STAT_PERI1 0x0404 +#define MUX_IGNORE_PERI 0x0500 +#define MUX_IGNORE_PERI1 0x0504 +#define DIV_PERI 0x0600 +#define DIV_STAT_PERI 0x0700 +#define EN_PCLK_PERI0 0x0800 +#define EN_PCLK_PERI1 0x0804 +#define EN_PCLK_PERI2 0x0808 +#define EN_PCLK_PERI3 0x080c +#define EN_PCLK_PERI_SECURE_CHIPID 0x0810 +#define EN_PCLK_PERI_SECURE_PROVKEY0 0x0814 +#define EN_PCLK_PERI_SECURE_PROVKEY1 0x0818 +#define EN_PCLK_PERI_SECURE_SECKEY 0x081c +#define EN_PCLK_PERI_SECURE_ANTIRBKCNT 0x0820 +#define EN_PCLK_PERI_SECURE_TOP_RTC 0x0824 +#define EN_PCLK_PERI_SECURE_TZPC 0x0828 +#define EN_SCLK_PERI 0x0a00 +#define EN_SCLK_PERI_SECURE_TOP_RTC 0x0a04 +#define EN_IP_PERI0 0x0b00 +#define EN_IP_PERI1 0x0b04 +#define EN_IP_PERI2 0x0b08 +#define EN_IP_PERI_SECURE_CHIPID 0x0b0c +#define EN_IP_PERI_SECURE_PROVKEY0 0x0b10 +#define EN_IP_PERI_SECURE_PROVKEY1 0x0b14 +#define EN_IP_PERI_SECURE_SECKEY 0x0b18 +#define EN_IP_PERI_SECURE_ANTIRBKCNT 0x0b1c +#define EN_IP_PERI_SECURE_TOP_RTC 0x0b20 +#define EN_IP_PERI_SECURE_TZPC 0x0b24 + +/* +*Registers for CMU_TOP +*/ +#define DISP_PLL_LOCK 0x0000 +#define AUD_PLL_LOCK 0x0004 +#define DISP_PLL_CON0 0x0100 +#define DISP_PLL_CON1 0x0104 +#define DISP_PLL_FDET 0x0108 +#define AUD_PLL_CON0 0x0110 +#define AUD_PLL_CON1 0x0114 +#define AUD_PLL_CON2 0x0118 +#define AUD_PLL_FDET 0x011c +#define MUX_SEL_TOP_PLL0 0x0200 +#define MUX_SEL_TOP_MFC 0x0204 +#define MUX_SEL_TOP_G2D 0x0208 +#define MUX_SEL_TOP_GSCL 0x020c +#define MUX_SEL_TOP_ISP10 0x0214 +#define MUX_SEL_TOP_ISP11 0x0218 +#define MUX_SEL_TOP_DISP0 0x021c +#define MUX_SEL_TOP_DISP1 0x0220 +#define MUX_SEL_TOP_BUS 0x0224 +#define MUX_SEL_TOP_PERI0 0x0228 +#define MUX_SEL_TOP_PERI1 0x022c +#define MUX_SEL_TOP_FSYS 0x0230 +#define MUX_ENABLE_TOP_PLL0 0x0300 +#define MUX_ENABLE_TOP_MFC 0x0304 +#define MUX_ENABLE_TOP_G2D 0x0308 +#define MUX_ENABLE_TOP_GSCL 0x030c +#define MUX_ENABLE_TOP_ISP10 0x0314 +#define MUX_ENABLE_TOP_ISP11 0x0318 +#define MUX_ENABLE_TOP_DISP0 0x031c +#define MUX_ENABLE_TOP_DISP1 0x0320 +#define MUX_ENABLE_TOP_BUS 0x0324 +#define MUX_ENABLE_TOP_PERI0 0x0328 +#define MUX_ENABLE_TOP_PERI1 0x032c +#define MUX_ENABLE_TOP_FSYS 0x0330 +#define MUX_STAT_TOP_PLL0 0x0400 +#define MUX_STAT_TOP_MFC 0x0404 +#define MUX_STAT_TOP_G2D 0x0408 +#define MUX_STAT_TOP_GSCL 0x040c +#define MUX_STAT_TOP_ISP10 0x0414 +#define MUX_STAT_TOP_ISP11 0x0418 +#define MUX_STAT_TOP_DISP0 0x041c +#define MUX_STAT_TOP_DISP1 0x0420 +#define MUX_STAT_TOP_BUS 0x0424 +#define MUX_STAT_TOP_PERI0 0x0428 +#define MUX_STAT_TOP_PERI1 0x042c +#define MUX_STAT_TOP_FSYS 0x0430 +#define MUX_IGNORE_TOP_PLL0 0x0500 +#define MUX_IGNORE_TOP_MFC 0x0504 +#define MUX_IGNORE_TOP_G2D 0x0508 +#define MUX_IGNORE_TOP_GSCL 0x050c +#define MUX_IGNORE_TOP_ISP10 0x0514 +#define MUX_IGNORE_TOP_ISP11 0x0518 +#define MUX_IGNORE_TOP_DISP0 0x051c +#define MUX_IGNORE_TOP_DISP1 0x0520 +#define MUX_IGNORE_TOP_BUS 0x0524 +#define MUX_IGNORE_TOP_PERI0 0x0528 +#define MUX_IGNORE_TOP_PERI1 0x052c +#define MUX_IGNORE_TOP_FSYS 0x0530 +#define DIV_TOP_G2D_MFC 0x0600 +#define DIV_TOP_GSCL_ISP0 0x0604 +#define DIV_TOP_ISP10 0x0608 +#define DIV_TOP_ISP11 0x060c +#define DIV_TOP_DISP 0x0610 +#define DIV_TOP_BUS 0x0614 +#define DIV_TOP_PERI0 0x0618 +#define DIV_TOP_PERI1 0x061c +#define DIV_TOP_PERI2 0x0620 +#define DIV_TOP_FSYS0 0x0624 +#define DIV_TOP_FSYS1 0x0628 +#define DIV_TOP_HPM 0x062c +#define DIV_TOP_PLL_FDET 0x0630 +#define DIV_STAT_TOP_G2D_MFC 0x0700 +#define DIV_STAT_TOP_GSCL_ISP0 0x0704 +#define DIV_STAT_TOP_ISP10 0x0708 +#define DIV_STAT_TOP_ISP11 0x070c +#define DIV_STAT_TOP_DISP 0x0710 +#define DIV_STAT_TOP_BUS 0x0714 +#define DIV_STAT_TOP_PERI0 0x0718 +#define DIV_STAT_TOP_PERI1 0x071c +#define DIV_STAT_TOP_PERI2 0x0720 +#define DIV_STAT_TOP_FSYS0 0x0724 +#define DIV_STAT_TOP_FSYS1 0x0728 +#define DIV_STAT_TOP_HPM 0x072c +#define DIV_STAT_TOP_PLL_FDET 0x0730 +#define EN_ACLK_TOP 0x0800 +#define EN_SCLK_TOP 0x0a00 +#define EN_IP_TOP 0x0b00 +#define CLKOUT_CMU_TOP 0x0c00 +#define CLKOUT_CMU_TOP_DIV_STAT 0x0c04 + +#endif /*__CLK_EXYNOS5260_H */ + -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-06 13:45 [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 Rahul Sharma @ 2014-03-07 13:56 ` Pankaj Dubey 2014-03-07 14:12 ` Tomasz Figa 2014-03-07 18:41 ` Rahul Sharma 0 siblings, 2 replies; 12+ messages in thread From: Pankaj Dubey @ 2014-03-07 13:56 UTC (permalink / raw) To: linux-arm-kernel Hi Rahul, On Thu, Mar 6, 2014 at 10:45 PM, Rahul Sharma <rahul.sharma@samsung.com> wrote: > Add support for exynos5260 clocks in clock driver. > > Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Even though my signed-off-by is present in this patch I can't see my email-id in cc list. Please check why? [snip] > +#include "clk-exynos5260.h" > +#include "clk.h" > +#include "clk-pll.h" > + > +#include <dt-bindings/clk/exynos5260-clk.h> Better to move "exynos5260-clk.h" from "dt-bindings/clk" to "dt-bindings/clock" as patch for moving all such headers already landed and looks good also. [snip] > +/* > + * Applicable for all 2550 Type PLLS for Exynos5260, listed below > + * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, > + * BUS_PLL, MEDIA_PLL, G3D_PLL. > + */ > +static const struct samsung_pll_rate_table pll2550_24mhz_tbl[] = { shouldn't we mark rate_table with __initconst? [snip] > + * Applicable for 2650 Type PLL for AUD_PLL. > + */ > +static const struct samsung_pll_rate_table pll2650_24mhz_tbl[] = { Ditto. [snip] > +#else > +static void exynos5260_clk_sleep_init(void) {} This will fail to compile if CONFIG_PM_SLEEP is not defined. Keep function signature same. > +#endif > + > +static struct samsung_clk_provider * > +__init exynos5260_cmu_register_one(struct device_node *np, > + struct exynos5260_cmu_info *cmu) > +{ > + void __iomem *reg_base; > + struct samsung_clk_provider *ctx; > + > + reg_base = of_iomap(np, 0); > + if (!reg_base) > + panic("%s: failed to map registers\n", __func__); > + > + ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids); > + if (!ctx) > + panic("%s: unable to alllocate ctx\n", __func__); > + > + if (cmu->pll_clks) > + samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks, > + reg_base); > + if (cmu->mux_clks) > + samsung_clk_register_mux(ctx, cmu->mux_clks, > + cmu->nr_mux_clks); > + if (cmu->div_clks) > + samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks); > + if (cmu->gate_clks) > + samsung_clk_register_gate(ctx, cmu->gate_clks, > + cmu->nr_gate_clks); > + if (cmu->clk_regs) > + exynos5260_clk_sleep_init(reg_base, cmu->clk_regs, > + cmu->nr_clk_regs); > + > + return ctx; As far as I can see only one user of this return "ctx" is only "exynos5260_clk_top_init", other init functions just ignoring this return value. This can be avoided if we register "fin_pll" (as well as all phyclocks as they are also fixed rate clocks) clock via DT. As I have already done it for another ExynosXXX SoC and it worked for me, on the same hand when today I tried this on Exynos5260, I can see it's working well and I can register "fin_pll" as "fixed_clock" via DT and kernel booted without any issues. Late registration of parent clock does not causing any issues and CCF takes care of that. If required I can send the changes internally or if you are OK I can also upload next version of this patch with this fix, along with addressing all other comments . [snip] > +struct samsung_fixed_rate_clock fixed_rate_ext_clks[] __initdata = { > + FRATE(FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0), > +}; In this version you removed other fixed clocks (phyclks and ioclks) but I can not see corresponding DT patches where it has been moved. Or am I missing anything here? [snip] > +static void __init exynos5260_clk_top_init(struct device_node *np) > +{ > + struct exynos5260_cmu_info cmu; > + struct samsung_clk_provider *ctx; > + > + memset(&cmu, 0, sizeof(cmu)); > + > + cmu.pll_clks = top_pll_clks; > + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); > + cmu.mux_clks = top_mux_clks; > + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); > + cmu.div_clks = top_div_clks; > + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); > + cmu.gate_clks = top_gate_clks; > + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); > + cmu.nr_clk_ids = TOP_NR_CLK; > + cmu.clk_regs = top_clk_regs; > + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); > + > + ctx = exynos5260_cmu_register_one(np, &cmu); > + > + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, > + ARRAY_SIZE(fixed_rate_ext_clks), > + ext_clk_match); > +} > + > +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", > + exynos5260_clk_top_init); Well with this approach we end up adding 14 such exynosxxx_clk_xxx_init functions all of which has similar lines of code. As I know there are many upcoming Exynos SoC which will also have similar multiple clock controllers (in some of them there are upto 25 clock domains, and in that case we will end up writing 25 such init functions) so I have following suggestion where we can have one more structure which will hold all static data and match_table to match compatibility string and return CMU_TYPE which can be mapped to get proper clock_data which can be used in single clock_init function. Following is some sample code which I have implemented and tested on one of Exynos SoC. Please let me know your opinion about this. ============================= static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = { { .cmu_type = CMU_TYPE_TOP, .mux_clocks = top_mux_clks, .div_clocks = top_div_clks, .pll_clocks = top_pll_clks, .clk_regs = top_clk_regs, .nr_mux_clocks = ARRAY_SIZE(top_mux_clks), .nr_div_clocks = ARRAY_SIZE(top_div_clks), .nr_pll_clocks = ARRAY_SIZE(top_pll_clks), .nr_clk_regs = ARRAY_SIZE(top_clk_regs), .nr_clks = TOP_NR_CLK, }, { .cmu_type = CMU_TYPE_EGL, .mux_clocks = egl_mux_clks, .div_clocks = egl_div_clks, .pll_clocks = egl_pll_clks, .clk_regs = egl_clk_regs, .nr_mux_clocks = ARRAY_SIZE(egl_mux_clks), .nr_div_clocks = ARRAY_SIZE(egl_div_clks), .nr_pll_clocks = ARRAY_SIZE(egl_pll_clks), .nr_clk_regs = ARRAY_SIZE(egl_clk_regs), .nr_clks = EGL_NR_CLK, }, { /* Add similar elements here */ }; static struct of_device_id cmu_subtype_match_table[] = { { .compatible = "exynosxxxx-cmu-top", .data = (void *)CMU_TYPE_TOP, }, { .compatible = "exynosxxx-cmu-peris", .data = (void *)CMU_TYPE_PERIS, }, { /* Add similar elements here */ }; void __init exynosxxx_clk_init(struct device_node *np) { [snip] match = of_match_node(cmu_subtype_match_table, np); if (!match) panic("%s: cmu type (%s) is not supported.\n", __func__, np->name); reg_base = of_iomap(np, 0); if (!reg_base) panic("%s: failed to map registers\n", __func__); cmu_type = (unsigned long) match->data; for (; i < CMU_TYPE_ALL; i++) { clk_data = &exynosxxxx_clk_data[i]; if (cmu_type == clk_data->cmu_type) break; } ctx = samsung_clk_init(np, reg_base, clk_data->nr_clks); if (!ctx) panic("%s: unable to alllocate ctx\n", __func__); if (clk_data->nr_pll_clocks) samsung_clk_register_pll(ctx, clk_data->pll_clocks, clk_data->nr_pll_clocks, reg_base); if (clk_data->nr_mux_clocks) samsung_clk_register_mux(ctx, clk_data->mux_clocks, clk_data->nr_mux_clocks); if (clk_data->nr_div_clocks) samsung_clk_register_div(ctx, clk_data->div_clocks, clk_data->nr_div_clocks); if (clk_data->nr_gate_clocks) samsung_clk_register_gate(ctx, clk_data->gate_clocks, clk_data->nr_gate_clocks); if (cmu->nr_clk_regs) exynosxxx_clk_sleep_init(reg_base, cmu->clk_regs, cmu->nr_clk_regs); [snip] } CLK_OF_DECLARE(cmu_top, "exynosxxxx-cmu-top", exynosxxxx_clk_init); CLK_OF_DECLARE(cmu_egl, "exynosxxxx-cmu-egl", exynosxxxx_clk_init); /* add more clock domain entries here */ ======================================================= > diff --git a/drivers/clk/samsung/clk-exynos5260.h b/drivers/clk/samsung/clk-exynos5260.h > new file mode 100644 > index 0000000..7c3717a > --- /dev/null > +++ b/drivers/clk/samsung/clk-exynos5260.h > @@ -0,0 +1,448 @@ > +#ifndef __CLK_EXYNOS5260_H > +#define __CLK_EXYNOS5260_H > + Thanks, Pankaj Dubey ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-07 13:56 ` Pankaj Dubey @ 2014-03-07 14:12 ` Tomasz Figa 2014-03-07 15:10 ` Pankaj Dubey 2014-03-07 18:41 ` Rahul Sharma 1 sibling, 1 reply; 12+ messages in thread From: Tomasz Figa @ 2014-03-07 14:12 UTC (permalink / raw) To: linux-arm-kernel Hi Pankaj, On 07.03.2014 14:56, Pankaj Dubey wrote: >> +static void __init exynos5260_clk_top_init(struct device_node *np) >> +{ >> + struct exynos5260_cmu_info cmu; >> + struct samsung_clk_provider *ctx; >> + >> + memset(&cmu, 0, sizeof(cmu)); >> + >> + cmu.pll_clks = top_pll_clks; >> + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); >> + cmu.mux_clks = top_mux_clks; >> + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); >> + cmu.div_clks = top_div_clks; >> + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); >> + cmu.gate_clks = top_gate_clks; >> + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); >> + cmu.nr_clk_ids = TOP_NR_CLK; >> + cmu.clk_regs = top_clk_regs; >> + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); >> + >> + ctx = exynos5260_cmu_register_one(np, &cmu); >> + >> + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, >> + ARRAY_SIZE(fixed_rate_ext_clks), >> + ext_clk_match); >> +} >> + >> +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", >> + exynos5260_clk_top_init); > > Well with this approach we end up adding 14 such > exynosxxx_clk_xxx_init functions all of which has similar lines of > code. As I know there are many upcoming Exynos SoC which will also > have similar multiple clock controllers (in some of them there are > upto 25 clock domains, and in that case we will end up writing 25 such > init functions) so I have following suggestion where we can have one > more structure which will hold all static data and match_table to > match compatibility string and return CMU_TYPE which can be mapped to > get proper clock_data which can be used in single clock_init function. > Following is some sample code which I have implemented and tested on > one of Exynos SoC. Please let me know your opinion about this. Yes, this looks better indeed, however there is still a room for improvement. Please see my comments below. > > ============================= > > static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = { Instead of making this an array, particular elements could be separate structures. This would simplify the code below. > { > .cmu_type = CMU_TYPE_TOP, > .mux_clocks = top_mux_clks, > .div_clocks = top_div_clks, > .pll_clocks = top_pll_clks, > .clk_regs = top_clk_regs, > .nr_mux_clocks = ARRAY_SIZE(top_mux_clks), > .nr_div_clocks = ARRAY_SIZE(top_div_clks), > .nr_pll_clocks = ARRAY_SIZE(top_pll_clks), > .nr_clk_regs = ARRAY_SIZE(top_clk_regs), > .nr_clks = TOP_NR_CLK, > }, { > .cmu_type = CMU_TYPE_EGL, > .mux_clocks = egl_mux_clks, > .div_clocks = egl_div_clks, > .pll_clocks = egl_pll_clks, > .clk_regs = egl_clk_regs, > .nr_mux_clocks = ARRAY_SIZE(egl_mux_clks), > .nr_div_clocks = ARRAY_SIZE(egl_div_clks), > .nr_pll_clocks = ARRAY_SIZE(egl_pll_clks), > .nr_clk_regs = ARRAY_SIZE(egl_clk_regs), > .nr_clks = EGL_NR_CLK, > }, { > /* Add similar elements here */ > }; > > static struct of_device_id cmu_subtype_match_table[] = { > { > .compatible = "exynosxxxx-cmu-top", > .data = (void *)CMU_TYPE_TOP, Here the data would be just a pointer to respective clock data struct defined above. > }, { > .compatible = "exynosxxx-cmu-peris", > .data = (void *)CMU_TYPE_PERIS, > }, { > /* Add similar elements here */ > }; > > void __init exynosxxx_clk_init(struct device_node *np) > { > [snip] > > match = of_match_node(cmu_subtype_match_table, np); > > if (!match) > panic("%s: cmu type (%s) is not supported.\n", __func__, > np->name); This can't happen, because this function won't be called for any node with compatible string not declared using CLK_OF_DECLARE(). > > reg_base = of_iomap(np, 0); > if (!reg_base) > panic("%s: failed to map registers\n", __func__); > > cmu_type = (unsigned long) match->data; > > for (; i < CMU_TYPE_ALL; i++) { > clk_data = &exynosxxxx_clk_data[i]; > if (cmu_type == clk_data->cmu_type) > break; > } Now clk_data could be taken directly from match->data, without the need to iterate over an array. Best regards, Tomasz ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-07 14:12 ` Tomasz Figa @ 2014-03-07 15:10 ` Pankaj Dubey 2014-03-07 15:22 ` Tomasz Figa 0 siblings, 1 reply; 12+ messages in thread From: Pankaj Dubey @ 2014-03-07 15:10 UTC (permalink / raw) To: linux-arm-kernel Hi Tomasz, On Fri, Mar 7, 2014 at 11:12 PM, Tomasz Figa <tomasz.figa@gmail.com> wrote: > Hi Pankaj, > > > On 07.03.2014 14:56, Pankaj Dubey wrote: >>> >>> +static void __init exynos5260_clk_top_init(struct device_node *np) >>> +{ >>> + struct exynos5260_cmu_info cmu; >>> + struct samsung_clk_provider *ctx; >>> + >>> + memset(&cmu, 0, sizeof(cmu)); >>> + >>> + cmu.pll_clks = top_pll_clks; >>> + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); >>> + cmu.mux_clks = top_mux_clks; >>> + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); >>> + cmu.div_clks = top_div_clks; >>> + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); >>> + cmu.gate_clks = top_gate_clks; >>> + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); >>> + cmu.nr_clk_ids = TOP_NR_CLK; >>> + cmu.clk_regs = top_clk_regs; >>> + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); >>> + >>> + ctx = exynos5260_cmu_register_one(np, &cmu); >>> + >>> + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, >>> + ARRAY_SIZE(fixed_rate_ext_clks), >>> + ext_clk_match); >>> +} >>> + >>> +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", >>> + exynos5260_clk_top_init); >> >> >> Well with this approach we end up adding 14 such >> exynosxxx_clk_xxx_init functions all of which has similar lines of >> code. As I know there are many upcoming Exynos SoC which will also >> have similar multiple clock controllers (in some of them there are >> upto 25 clock domains, and in that case we will end up writing 25 such >> init functions) so I have following suggestion where we can have one >> more structure which will hold all static data and match_table to >> match compatibility string and return CMU_TYPE which can be mapped to >> get proper clock_data which can be used in single clock_init function. >> Following is some sample code which I have implemented and tested on >> one of Exynos SoC. Please let me know your opinion about this. > > > Yes, this looks better indeed, however there is still a room for > improvement. Please see my comments below. > > >> >> ============================= >> >> static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = { > > > Instead of making this an array, particular elements could be separate > structures. This would simplify the code below. > > >> { >> .cmu_type = CMU_TYPE_TOP, >> .mux_clocks = top_mux_clks, >> .div_clocks = top_div_clks, >> .pll_clocks = top_pll_clks, >> .clk_regs = top_clk_regs, >> .nr_mux_clocks = ARRAY_SIZE(top_mux_clks), >> .nr_div_clocks = ARRAY_SIZE(top_div_clks), >> .nr_pll_clocks = ARRAY_SIZE(top_pll_clks), >> .nr_clk_regs = ARRAY_SIZE(top_clk_regs), >> .nr_clks = TOP_NR_CLK, >> }, { >> .cmu_type = CMU_TYPE_EGL, >> .mux_clocks = egl_mux_clks, >> .div_clocks = egl_div_clks, >> .pll_clocks = egl_pll_clks, >> .clk_regs = egl_clk_regs, >> .nr_mux_clocks = ARRAY_SIZE(egl_mux_clks), >> .nr_div_clocks = ARRAY_SIZE(egl_div_clks), >> .nr_pll_clocks = ARRAY_SIZE(egl_pll_clks), >> .nr_clk_regs = ARRAY_SIZE(egl_clk_regs), >> .nr_clks = EGL_NR_CLK, >> }, { >> /* Add similar elements here */ >> }; >> >> static struct of_device_id cmu_subtype_match_table[] = { >> { >> .compatible = "exynosxxxx-cmu-top", >> .data = (void *)CMU_TYPE_TOP, > > > Here the data would be just a pointer to respective clock data struct > defined above. > > >> }, { >> .compatible = "exynosxxx-cmu-peris", >> .data = (void *)CMU_TYPE_PERIS, >> }, { >> /* Add similar elements here */ >> }; >> >> void __init exynosxxx_clk_init(struct device_node *np) >> { >> [snip] >> >> match = of_match_node(cmu_subtype_match_table, np); >> >> if (!match) >> panic("%s: cmu type (%s) is not supported.\n", __func__, >> np->name); > > > This can't happen, because this function won't be called for any node with > compatible string not declared using CLK_OF_DECLARE(). Agreed. > > >> >> reg_base = of_iomap(np, 0); >> if (!reg_base) >> panic("%s: failed to map registers\n", __func__); >> >> cmu_type = (unsigned long) match->data; >> >> for (; i < CMU_TYPE_ALL; i++) { >> clk_data = &exynosxxxx_clk_data[i]; >> if (cmu_type == clk_data->cmu_type) >> break; >> } > > > Now clk_data could be taken directly from match->data, without the need to > iterate over an array. Good point. Let me change as per your suggestion and test. And then we will go for this change in next new version of patch. Also please review rest patch also and let us know if anything still can be improved. Thanks, Pankaj Dubey > > Best regards, > Tomasz > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-07 15:10 ` Pankaj Dubey @ 2014-03-07 15:22 ` Tomasz Figa 2014-03-07 19:20 ` Rahul Sharma 0 siblings, 1 reply; 12+ messages in thread From: Tomasz Figa @ 2014-03-07 15:22 UTC (permalink / raw) To: linux-arm-kernel On 07.03.2014 16:10, Pankaj Dubey wrote: > Hi Tomasz, > > > On Fri, Mar 7, 2014 at 11:12 PM, Tomasz Figa <tomasz.figa@gmail.com> wrote: >> Hi Pankaj, >> >> >> On 07.03.2014 14:56, Pankaj Dubey wrote: >>>> >>>> +static void __init exynos5260_clk_top_init(struct device_node *np) >>>> +{ >>>> + struct exynos5260_cmu_info cmu; >>>> + struct samsung_clk_provider *ctx; >>>> + >>>> + memset(&cmu, 0, sizeof(cmu)); >>>> + >>>> + cmu.pll_clks = top_pll_clks; >>>> + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); >>>> + cmu.mux_clks = top_mux_clks; >>>> + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); >>>> + cmu.div_clks = top_div_clks; >>>> + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); >>>> + cmu.gate_clks = top_gate_clks; >>>> + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); >>>> + cmu.nr_clk_ids = TOP_NR_CLK; >>>> + cmu.clk_regs = top_clk_regs; >>>> + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); >>>> + >>>> + ctx = exynos5260_cmu_register_one(np, &cmu); >>>> + >>>> + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, >>>> + ARRAY_SIZE(fixed_rate_ext_clks), >>>> + ext_clk_match); >>>> +} >>>> + >>>> +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", >>>> + exynos5260_clk_top_init); >>> >>> >>> Well with this approach we end up adding 14 such >>> exynosxxx_clk_xxx_init functions all of which has similar lines of >>> code. As I know there are many upcoming Exynos SoC which will also >>> have similar multiple clock controllers (in some of them there are >>> upto 25 clock domains, and in that case we will end up writing 25 such >>> init functions) so I have following suggestion where we can have one >>> more structure which will hold all static data and match_table to >>> match compatibility string and return CMU_TYPE which can be mapped to >>> get proper clock_data which can be used in single clock_init function. >>> Following is some sample code which I have implemented and tested on >>> one of Exynos SoC. Please let me know your opinion about this. >> >> >> Yes, this looks better indeed, however there is still a room for >> improvement. Please see my comments below. >> >> >>> >>> ============================= >>> >>> static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = { >> >> >> Instead of making this an array, particular elements could be separate >> structures. This would simplify the code below. >> >> >>> { >>> .cmu_type = CMU_TYPE_TOP, >>> .mux_clocks = top_mux_clks, >>> .div_clocks = top_div_clks, >>> .pll_clocks = top_pll_clks, >>> .clk_regs = top_clk_regs, >>> .nr_mux_clocks = ARRAY_SIZE(top_mux_clks), >>> .nr_div_clocks = ARRAY_SIZE(top_div_clks), >>> .nr_pll_clocks = ARRAY_SIZE(top_pll_clks), >>> .nr_clk_regs = ARRAY_SIZE(top_clk_regs), >>> .nr_clks = TOP_NR_CLK, >>> }, { >>> .cmu_type = CMU_TYPE_EGL, >>> .mux_clocks = egl_mux_clks, >>> .div_clocks = egl_div_clks, >>> .pll_clocks = egl_pll_clks, >>> .clk_regs = egl_clk_regs, >>> .nr_mux_clocks = ARRAY_SIZE(egl_mux_clks), >>> .nr_div_clocks = ARRAY_SIZE(egl_div_clks), >>> .nr_pll_clocks = ARRAY_SIZE(egl_pll_clks), >>> .nr_clk_regs = ARRAY_SIZE(egl_clk_regs), >>> .nr_clks = EGL_NR_CLK, >>> }, { >>> /* Add similar elements here */ >>> }; >>> >>> static struct of_device_id cmu_subtype_match_table[] = { >>> { >>> .compatible = "exynosxxxx-cmu-top", >>> .data = (void *)CMU_TYPE_TOP, >> >> >> Here the data would be just a pointer to respective clock data struct >> defined above. >> >> >>> }, { >>> .compatible = "exynosxxx-cmu-peris", >>> .data = (void *)CMU_TYPE_PERIS, >>> }, { >>> /* Add similar elements here */ >>> }; >>> >>> void __init exynosxxx_clk_init(struct device_node *np) >>> { >>> [snip] >>> >>> match = of_match_node(cmu_subtype_match_table, np); >>> >>> if (!match) >>> panic("%s: cmu type (%s) is not supported.\n", __func__, >>> np->name); >> >> >> This can't happen, because this function won't be called for any node with >> compatible string not declared using CLK_OF_DECLARE(). > > Agreed. > >> >> >>> >>> reg_base = of_iomap(np, 0); >>> if (!reg_base) >>> panic("%s: failed to map registers\n", __func__); >>> >>> cmu_type = (unsigned long) match->data; >>> >>> for (; i < CMU_TYPE_ALL; i++) { >>> clk_data = &exynosxxxx_clk_data[i]; >>> if (cmu_type == clk_data->cmu_type) >>> break; >>> } >> >> >> Now clk_data could be taken directly from match->data, without the need to >> iterate over an array. > > Good point. Let me change as per your suggestion and test. And then we > will go for this change in next new version of patch. OK, thanks. > Also please > review rest patch also and let us know if anything still can be > improved. I had reviewed version 3 of this series and most of my comments have been addressed. I'm waiting for remaining two to be addressed, but they are covered by your comments for v4. A link to v3 thread for reference: http://thread.gmane.org/gmane.linux.kernel.samsung-soc/27249 Best regards, Tomasz ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-07 15:22 ` Tomasz Figa @ 2014-03-07 19:20 ` Rahul Sharma 2014-03-08 9:24 ` Pankaj Dubey 0 siblings, 1 reply; 12+ messages in thread From: Rahul Sharma @ 2014-03-07 19:20 UTC (permalink / raw) To: linux-arm-kernel Hi Tomasz, On 7 March 2014 20:52, Tomasz Figa <tomasz.figa@gmail.com> wrote: > On 07.03.2014 16:10, Pankaj Dubey wrote: >> >> Hi Tomasz, >> >> >> On Fri, Mar 7, 2014 at 11:12 PM, Tomasz Figa <tomasz.figa@gmail.com> >> wrote: >>> >>> Hi Pankaj, >>> >>> >>> On 07.03.2014 14:56, Pankaj Dubey wrote: >>>>> >>>>> >>>>> +static void __init exynos5260_clk_top_init(struct device_node *np) >>>>> +{ >>>>> + struct exynos5260_cmu_info cmu; >>>>> + struct samsung_clk_provider *ctx; >>>>> + >>>>> + memset(&cmu, 0, sizeof(cmu)); >>>>> + >>>>> + cmu.pll_clks = top_pll_clks; >>>>> + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); >>>>> + cmu.mux_clks = top_mux_clks; >>>>> + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); >>>>> + cmu.div_clks = top_div_clks; >>>>> + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); >>>>> + cmu.gate_clks = top_gate_clks; >>>>> + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); >>>>> + cmu.nr_clk_ids = TOP_NR_CLK; >>>>> + cmu.clk_regs = top_clk_regs; >>>>> + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); >>>>> + >>>>> + ctx = exynos5260_cmu_register_one(np, &cmu); >>>>> + >>>>> + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, >>>>> + ARRAY_SIZE(fixed_rate_ext_clks), >>>>> + ext_clk_match); >>>>> +} >>>>> + >>>>> +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", >>>>> + exynos5260_clk_top_init); >>>> >>>> >>>> >>>> Well with this approach we end up adding 14 such >>>> exynosxxx_clk_xxx_init functions all of which has similar lines of >>>> code. As I know there are many upcoming Exynos SoC which will also >>>> have similar multiple clock controllers (in some of them there are >>>> upto 25 clock domains, and in that case we will end up writing 25 such >>>> init functions) so I have following suggestion where we can have one >>>> more structure which will hold all static data and match_table to >>>> match compatibility string and return CMU_TYPE which can be mapped to >>>> get proper clock_data which can be used in single clock_init function. >>>> Following is some sample code which I have implemented and tested on >>>> one of Exynos SoC. Please let me know your opinion about this. >>> >>> >>> >>> Yes, this looks better indeed, however there is still a room for >>> improvement. Please see my comments below. >>> >>> >>>> >>>> ============================= >>>> >>>> static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = { >>> >>> >>> >>> Instead of making this an array, particular elements could be separate >>> structures. This would simplify the code below. >>> >>> >>>> { >>>> .cmu_type = CMU_TYPE_TOP, >>>> .mux_clocks = top_mux_clks, >>>> .div_clocks = top_div_clks, >>>> .pll_clocks = top_pll_clks, >>>> .clk_regs = top_clk_regs, >>>> .nr_mux_clocks = ARRAY_SIZE(top_mux_clks), >>>> .nr_div_clocks = ARRAY_SIZE(top_div_clks), >>>> .nr_pll_clocks = ARRAY_SIZE(top_pll_clks), >>>> .nr_clk_regs = ARRAY_SIZE(top_clk_regs), >>>> .nr_clks = TOP_NR_CLK, >>>> }, { >>>> .cmu_type = CMU_TYPE_EGL, >>>> .mux_clocks = egl_mux_clks, >>>> .div_clocks = egl_div_clks, >>>> .pll_clocks = egl_pll_clks, >>>> .clk_regs = egl_clk_regs, >>>> .nr_mux_clocks = ARRAY_SIZE(egl_mux_clks), >>>> .nr_div_clocks = ARRAY_SIZE(egl_div_clks), >>>> .nr_pll_clocks = ARRAY_SIZE(egl_pll_clks), >>>> .nr_clk_regs = ARRAY_SIZE(egl_clk_regs), >>>> .nr_clks = EGL_NR_CLK, >>>> }, { >>>> /* Add similar elements here */ >>>> }; >>>> >>>> static struct of_device_id cmu_subtype_match_table[] = { >>>> { >>>> .compatible = "exynosxxxx-cmu-top", >>>> .data = (void *)CMU_TYPE_TOP, >>> >>> >>> >>> Here the data would be just a pointer to respective clock data struct >>> defined above. >>> >>> >>>> }, { >>>> .compatible = "exynosxxx-cmu-peris", >>>> .data = (void *)CMU_TYPE_PERIS, >>>> }, { >>>> /* Add similar elements here */ >>>> }; >>>> >>>> void __init exynosxxx_clk_init(struct device_node *np) >>>> { >>>> [snip] >>>> >>>> match = of_match_node(cmu_subtype_match_table, np); >>>> >>>> if (!match) >>>> panic("%s: cmu type (%s) is not supported.\n", >>>> __func__, >>>> np->name); >>> >>> >>> >>> This can't happen, because this function won't be called for any node >>> with >>> compatible string not declared using CLK_OF_DECLARE(). >> >> >> Agreed. >> >>> >>> >>>> >>>> reg_base = of_iomap(np, 0); >>>> if (!reg_base) >>>> panic("%s: failed to map registers\n", __func__); >>>> >>>> cmu_type = (unsigned long) match->data; >>>> >>>> for (; i < CMU_TYPE_ALL; i++) { >>>> clk_data = &exynosxxxx_clk_data[i]; >>>> if (cmu_type == clk_data->cmu_type) >>>> break; >>>> } >>> >>> >>> >>> Now clk_data could be taken directly from match->data, without the need >>> to >>> iterate over an array. >> I am just curious, is it really a worth to replace 14 init functions with 14 same sized isolated structures. We will also be adding a array of these structure pointers and little overhead to parse this array based on compatible string for each cmu probe. IMHO, calling correct function meant for the given CMU, looks more straight and crisp. Most of the duplication is already addressed in exynos5260_cmu_register_one. Please, let me know if we are still looking for this change. It should be easy to change it that way. >> >> Good point. Let me change as per your suggestion and test. And then we >> will go for this change in next new version of patch. > > > OK, thanks. > > >> Also please >> review rest patch also and let us know if anything still can be >> improved. > > > I had reviewed version 3 of this series and most of my comments have been > addressed. I'm waiting for remaining two to be addressed, but they are > covered by your comments for v4. I will address the fixes for fin_pll and sclk_uart in the next version. Thanks for the review. Regards, Rahul Sharma. > > A link to v3 thread for reference: > http://thread.gmane.org/gmane.linux.kernel.samsung-soc/27249 > > Best regards, > Tomasz ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-07 19:20 ` Rahul Sharma @ 2014-03-08 9:24 ` Pankaj Dubey 2014-03-09 23:59 ` Tomasz Figa 0 siblings, 1 reply; 12+ messages in thread From: Pankaj Dubey @ 2014-03-08 9:24 UTC (permalink / raw) To: linux-arm-kernel Hi Rahul, On 03/08/2014 04:20 AM, Rahul Sharma wrote: > Hi Tomasz, > > On 7 March 2014 20:52, Tomasz Figa <tomasz.figa@gmail.com> wrote: >> On 07.03.2014 16:10, Pankaj Dubey wrote: >>> Hi Tomasz, >>> >>> >>> On Fri, Mar 7, 2014 at 11:12 PM, Tomasz Figa <tomasz.figa@gmail.com> >>> wrote: >>>> Hi Pankaj, >>>> >>>> >>>> On 07.03.2014 14:56, Pankaj Dubey wrote: >>>>>> >>>>>> +static void __init exynos5260_clk_top_init(struct device_node *np) >>>>>> +{ >>>>>> + struct exynos5260_cmu_info cmu; >>>>>> + struct samsung_clk_provider *ctx; >>>>>> + >>>>>> + memset(&cmu, 0, sizeof(cmu)); >>>>>> + >>>>>> + cmu.pll_clks = top_pll_clks; >>>>>> + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); >>>>>> + cmu.mux_clks = top_mux_clks; >>>>>> + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); >>>>>> + cmu.div_clks = top_div_clks; >>>>>> + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); >>>>>> + cmu.gate_clks = top_gate_clks; >>>>>> + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); >>>>>> + cmu.nr_clk_ids = TOP_NR_CLK; >>>>>> + cmu.clk_regs = top_clk_regs; >>>>>> + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); >>>>>> + >>>>>> + ctx = exynos5260_cmu_register_one(np, &cmu); >>>>>> + >>>>>> + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, >>>>>> + ARRAY_SIZE(fixed_rate_ext_clks), >>>>>> + ext_clk_match); >>>>>> +} >>>>>> + >>>>>> +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", >>>>>> + exynos5260_clk_top_init); >>>>> >>>>> >>>>> Well with this approach we end up adding 14 such >>>>> exynosxxx_clk_xxx_init functions all of which has similar lines of >>>>> code. As I know there are many upcoming Exynos SoC which will also >>>>> have similar multiple clock controllers (in some of them there are >>>>> upto 25 clock domains, and in that case we will end up writing 25 such >>>>> init functions) so I have following suggestion where we can have one >>>>> more structure which will hold all static data and match_table to >>>>> match compatibility string and return CMU_TYPE which can be mapped to >>>>> get proper clock_data which can be used in single clock_init function. >>>>> Following is some sample code which I have implemented and tested on >>>>> one of Exynos SoC. Please let me know your opinion about this. >>>> >>>> >>>> Yes, this looks better indeed, however there is still a room for >>>> improvement. Please see my comments below. >>>> >>>> >>>>> ============================= >>>>> >>>>> static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = { >>>> >>>> >>>> Instead of making this an array, particular elements could be separate >>>> structures. This would simplify the code below. >>>> >>>> >>>>> { >>>>> .cmu_type = CMU_TYPE_TOP, >>>>> .mux_clocks = top_mux_clks, >>>>> .div_clocks = top_div_clks, >>>>> .pll_clocks = top_pll_clks, >>>>> .clk_regs = top_clk_regs, >>>>> .nr_mux_clocks = ARRAY_SIZE(top_mux_clks), >>>>> .nr_div_clocks = ARRAY_SIZE(top_div_clks), >>>>> .nr_pll_clocks = ARRAY_SIZE(top_pll_clks), >>>>> .nr_clk_regs = ARRAY_SIZE(top_clk_regs), >>>>> .nr_clks = TOP_NR_CLK, >>>>> }, { >>>>> .cmu_type = CMU_TYPE_EGL, >>>>> .mux_clocks = egl_mux_clks, >>>>> .div_clocks = egl_div_clks, >>>>> .pll_clocks = egl_pll_clks, >>>>> .clk_regs = egl_clk_regs, >>>>> .nr_mux_clocks = ARRAY_SIZE(egl_mux_clks), >>>>> .nr_div_clocks = ARRAY_SIZE(egl_div_clks), >>>>> .nr_pll_clocks = ARRAY_SIZE(egl_pll_clks), >>>>> .nr_clk_regs = ARRAY_SIZE(egl_clk_regs), >>>>> .nr_clks = EGL_NR_CLK, >>>>> }, { >>>>> /* Add similar elements here */ >>>>> }; >>>>> >>>>> static struct of_device_id cmu_subtype_match_table[] = { >>>>> { >>>>> .compatible = "exynosxxxx-cmu-top", >>>>> .data = (void *)CMU_TYPE_TOP, >>>> >>>> >>>> Here the data would be just a pointer to respective clock data struct >>>> defined above. >>>> >>>> >>>>> }, { >>>>> .compatible = "exynosxxx-cmu-peris", >>>>> .data = (void *)CMU_TYPE_PERIS, >>>>> }, { >>>>> /* Add similar elements here */ >>>>> }; >>>>> >>>>> void __init exynosxxx_clk_init(struct device_node *np) >>>>> { >>>>> [snip] >>>>> >>>>> match = of_match_node(cmu_subtype_match_table, np); >>>>> >>>>> if (!match) >>>>> panic("%s: cmu type (%s) is not supported.\n", >>>>> __func__, >>>>> np->name); >>>> >>>> >>>> This can't happen, because this function won't be called for any node >>>> with >>>> compatible string not declared using CLK_OF_DECLARE(). >>> >>> Agreed. >>> >>>> >>>>> reg_base = of_iomap(np, 0); >>>>> if (!reg_base) >>>>> panic("%s: failed to map registers\n", __func__); >>>>> >>>>> cmu_type = (unsigned long) match->data; >>>>> >>>>> for (; i < CMU_TYPE_ALL; i++) { >>>>> clk_data = &exynosxxxx_clk_data[i]; >>>>> if (cmu_type == clk_data->cmu_type) >>>>> break; >>>>> } >>>> >>>> >>>> Now clk_data could be taken directly from match->data, without the need >>>> to >>>> iterate over an array. > I am just curious, is it really a worth to replace 14 init functions > with 14 same > sized isolated structures. We will also be adding a array of these structure > pointers and little overhead to parse this array based on compatible > string for each cmu probe. > > IMHO, calling correct function meant for the given CMU, looks more > straight and crisp. Most of the duplication is already addressed in > exynos5260_cmu_register_one. > > Please, let me know if we are still looking for this change. It should > be easy to > change it that way. > >>> Good point. Let me change as per your suggestion and test. And then we >>> will go for this change in next new version of patch. >> >> OK, thanks. >> >> >>> Also please >>> review rest patch also and let us know if anything still can be >>> improved. >> >> I had reviewed version 3 of this series and most of my comments have been >> addressed. I'm waiting for remaining two to be addressed, but they are >> covered by your comments for v4. > I will address the fixes for fin_pll and sclk_uart in the next > version. Thanks for the > review. One update from my end. Today I verified that even though I removed CLK_IGNORE_UNUSED flag from sclk_uartX I can see kernel is booting fine and no issues as you mentioned. FYI I am using 3.14_rc1 tag and applied all patches on top of it. For reference I have mailed all related patches to you. @Tomasz, I modified code as per our discussion and addressed all comments including moving fixed clock to DT and found it's working well, so we can now finalize which way to go ahead. Following is some data between V4 and probable next version, which might help in making decision. drivers/clk/samsung/exynos5260-clock.c Before Change LoC: 1890 size drivers/clk/samsung/clk-exynos5260.o text data bss dec hex filename 14226 14956 0 29182 71fe drivers/clk/samsung/clk-exynos5260.o After Change: LoC: 1806 size drivers/clk/samsung/clk-exynos5260.o text data bss dec hex filename 15446 14544 0 29990 7526 drivers/clk/samsung/clk-exynos5260.o > > Regards, > Rahul Sharma. > >> A link to v3 thread for reference: >> http://thread.gmane.org/gmane.linux.kernel.samsung-soc/27249 >> >> Best regards, >> Tomasz -- Best Regards, Pankaj Dubey ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-08 9:24 ` Pankaj Dubey @ 2014-03-09 23:59 ` Tomasz Figa 2014-03-10 2:10 ` Rahul Sharma 0 siblings, 1 reply; 12+ messages in thread From: Tomasz Figa @ 2014-03-09 23:59 UTC (permalink / raw) To: linux-arm-kernel On 08.03.2014 10:24, Pankaj Dubey wrote: > Hi Rahul, > I modified code as per our discussion and addressed all comments > including moving fixed clock to DT > and found it's working well, so we can now finalize which way to go ahead. > Following is some data between V4 and probable next version, which might > help in making decision. > > drivers/clk/samsung/exynos5260-clock.c > > Before Change > LoC: 1890 > size drivers/clk/samsung/clk-exynos5260.o > text data bss dec hex filename > 14226 14956 0 29182 71fe > drivers/clk/samsung/clk-exynos5260.o > > After Change: > LoC: 1806 > size drivers/clk/samsung/clk-exynos5260.o > text data bss dec hex filename > 15446 14544 0 29990 7526 > drivers/clk/samsung/clk-exynos5260.o Well, somehow I've been under impression that the change would bring more significant results. Here we can see slight reduction in lines of code, but also slight increase of kernel image size. Still, in general, nothing extreme. In this case I'd probably go with Rahul's original code, as it doesn't require second matching and separate match table, which adds redundant compatible strings used just for this extra matching pass. I guess this is all just bike shedding, though. Best regards, Tomasz ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-09 23:59 ` Tomasz Figa @ 2014-03-10 2:10 ` Rahul Sharma 0 siblings, 0 replies; 12+ messages in thread From: Rahul Sharma @ 2014-03-10 2:10 UTC (permalink / raw) To: linux-arm-kernel Hi Tomasz, On 10 March 2014 05:29, Tomasz Figa <tomasz.figa@gmail.com> wrote: > On 08.03.2014 10:24, Pankaj Dubey wrote: >> >> Hi Rahul, > > >> I modified code as per our discussion and addressed all comments >> including moving fixed clock to DT >> and found it's working well, so we can now finalize which way to go >> ahead. >> Following is some data between V4 and probable next version, which might >> help in making decision. >> >> drivers/clk/samsung/exynos5260-clock.c >> >> Before Change >> LoC: 1890 >> size drivers/clk/samsung/clk-exynos5260.o >> text data bss dec hex filename >> 14226 14956 0 29182 71fe >> drivers/clk/samsung/clk-exynos5260.o >> >> After Change: >> LoC: 1806 >> size drivers/clk/samsung/clk-exynos5260.o >> text data bss dec hex filename >> 15446 14544 0 29990 7526 >> drivers/clk/samsung/clk-exynos5260.o > > > Well, somehow I've been under impression that the change would bring more > significant results. Here we can see slight reduction in lines of code, but > also slight increase of kernel image size. Still, in general, nothing > extreme. > > In this case I'd probably go with Rahul's original code, as it doesn't > require second matching and separate match table, which adds redundant > compatible strings used just for this extra matching pass. > > I guess this is all just bike shedding, though. yea. I understand. Will proceed as you said. Regards, Rahul Sharma > > Best regards, > Tomasz ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-07 13:56 ` Pankaj Dubey 2014-03-07 14:12 ` Tomasz Figa @ 2014-03-07 18:41 ` Rahul Sharma 2014-03-08 4:53 ` Pankaj Dubey 1 sibling, 1 reply; 12+ messages in thread From: Rahul Sharma @ 2014-03-07 18:41 UTC (permalink / raw) To: linux-arm-kernel HI Pankaj, On 7 March 2014 19:26, Pankaj Dubey <pankaj.dubey@samsung.com> wrote: > Hi Rahul, > > On Thu, Mar 6, 2014 at 10:45 PM, Rahul Sharma <rahul.sharma@samsung.com> wrote: >> Add support for exynos5260 clocks in clock driver. >> >> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> >> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > > Even though my signed-off-by is present in this patch I can't see my > email-id in cc list. Please check why? Yea this is strange. I always use git send. let me check it. I will also add you manually for next version. > > [snip] > >> +#include "clk-exynos5260.h" >> +#include "clk.h" >> +#include "clk-pll.h" >> + >> +#include <dt-bindings/clk/exynos5260-clk.h> > > Better to move "exynos5260-clk.h" from "dt-bindings/clk" to "dt-bindings/clock" > as patch for moving all such headers already landed and looks good also. > yea correct. I changed this. > [snip] > >> +/* >> + * Applicable for all 2550 Type PLLS for Exynos5260, listed below >> + * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, >> + * BUS_PLL, MEDIA_PLL, G3D_PLL. >> + */ >> +static const struct samsung_pll_rate_table pll2550_24mhz_tbl[] = { > > shouldn't we mark rate_table with __initconst? > added. > [snip] > >> + * Applicable for 2650 Type PLL for AUD_PLL. >> + */ >> +static const struct samsung_pll_rate_table pll2650_24mhz_tbl[] = { > > Ditto. > > [snip] > >> +#else >> +static void exynos5260_clk_sleep_init(void) {} > > This will fail to compile if CONFIG_PM_SLEEP is not defined. Keep function > signature same. > Done. >> +#endif >> + >> +static struct samsung_clk_provider * >> +__init exynos5260_cmu_register_one(struct device_node *np, >> + struct exynos5260_cmu_info *cmu) >> +{ >> + void __iomem *reg_base; >> + struct samsung_clk_provider *ctx; >> + >> + reg_base = of_iomap(np, 0); >> + if (!reg_base) >> + panic("%s: failed to map registers\n", __func__); >> + >> + ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids); >> + if (!ctx) >> + panic("%s: unable to alllocate ctx\n", __func__); >> + >> + if (cmu->pll_clks) >> + samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks, >> + reg_base); >> + if (cmu->mux_clks) >> + samsung_clk_register_mux(ctx, cmu->mux_clks, >> + cmu->nr_mux_clks); >> + if (cmu->div_clks) >> + samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks); >> + if (cmu->gate_clks) >> + samsung_clk_register_gate(ctx, cmu->gate_clks, >> + cmu->nr_gate_clks); >> + if (cmu->clk_regs) >> + exynos5260_clk_sleep_init(reg_base, cmu->clk_regs, >> + cmu->nr_clk_regs); >> + >> + return ctx; > > As far as I can see only one user of this return "ctx" is only > "exynos5260_clk_top_init", other init functions just ignoring this > return value. > This can be avoided if we register "fin_pll" (as well as all phyclocks > as they are also fixed rate clocks) clock via DT. > As I have already done it for another ExynosXXX SoC and it worked for > me, on the same hand when today I tried this on Exynos5260, I can see > it's working well and I can register "fin_pll" as "fixed_clock" via DT > and kernel booted without any issues. Late registration of parent > clock does not causing any issues and CCF takes care of that. Hmmn... thats why we are able to chain multiple CMUs :). But I consistently see "divide by zero" asserts during mct init. I will send you the logs offline. If I just ensure that "fin_pll" registers before other CMUs, no problem. I am surprised why you are not getting this issue. > If required I can send the changes internally or if you are OK I can If fix is in same file/dt please highlight those here else; better you post a independent fix. Even UART behaves weird in my setup with IGNORE flag removed. Rest of the changes are pretty trivial. I should be able to handle this. > also upload next version of this patch with this fix, along with > addressing all other comments . > > [snip] > >> +struct samsung_fixed_rate_clock fixed_rate_ext_clks[] __initdata = { >> + FRATE(FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0), >> +}; > > In this version you removed other fixed clocks (phyclks and ioclks) > but I can not see corresponding DT patches where it has been moved. > Or am I missing anything here? I will update DT patch set. Those are already dependent on dt based probe for sysram. I will be updating the next week, probably. > > [snip] > >> +static void __init exynos5260_clk_top_init(struct device_node *np) >> +{ >> + struct exynos5260_cmu_info cmu; >> + struct samsung_clk_provider *ctx; >> + >> + memset(&cmu, 0, sizeof(cmu)); >> + >> + cmu.pll_clks = top_pll_clks; >> + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); >> + cmu.mux_clks = top_mux_clks; >> + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); >> + cmu.div_clks = top_div_clks; >> + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); >> + cmu.gate_clks = top_gate_clks; >> + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); >> + cmu.nr_clk_ids = TOP_NR_CLK; >> + cmu.clk_regs = top_clk_regs; >> + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); >> + >> + ctx = exynos5260_cmu_register_one(np, &cmu); >> + >> + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, >> + ARRAY_SIZE(fixed_rate_ext_clks), >> + ext_clk_match); >> +} >> + >> +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", >> + exynos5260_clk_top_init); > > Well with this approach we end up adding 14 such > exynosxxx_clk_xxx_init functions all of which has similar lines of > code. As I know there are many upcoming Exynos SoC which will also > have similar multiple clock controllers (in some of them there are > upto 25 clock domains, and in that case we will end up writing 25 such > init functions) so I have following suggestion where we can have one > more structure which will hold all static data and match_table to > match compatibility string and return CMU_TYPE which can be mapped to > get proper clock_data which can be used in single clock_init function. > Following is some sample code which I have implemented and tested on > one of Exynos SoC. Please let me know your opinion about this. > > ============================= > > static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = { > { > .cmu_type = CMU_TYPE_TOP, > .mux_clocks = top_mux_clks, > .div_clocks = top_div_clks, > .pll_clocks = top_pll_clks, > .clk_regs = top_clk_regs, > .nr_mux_clocks = ARRAY_SIZE(top_mux_clks), > .nr_div_clocks = ARRAY_SIZE(top_div_clks), > .nr_pll_clocks = ARRAY_SIZE(top_pll_clks), > .nr_clk_regs = ARRAY_SIZE(top_clk_regs), > .nr_clks = TOP_NR_CLK, > }, { > .cmu_type = CMU_TYPE_EGL, > .mux_clocks = egl_mux_clks, > .div_clocks = egl_div_clks, > .pll_clocks = egl_pll_clks, > .clk_regs = egl_clk_regs, > .nr_mux_clocks = ARRAY_SIZE(egl_mux_clks), > .nr_div_clocks = ARRAY_SIZE(egl_div_clks), > .nr_pll_clocks = ARRAY_SIZE(egl_pll_clks), > .nr_clk_regs = ARRAY_SIZE(egl_clk_regs), > .nr_clks = EGL_NR_CLK, > }, { > /* Add similar elements here */ > }; > > static struct of_device_id cmu_subtype_match_table[] = { > { > .compatible = "exynosxxxx-cmu-top", > .data = (void *)CMU_TYPE_TOP, > }, { > .compatible = "exynosxxx-cmu-peris", > .data = (void *)CMU_TYPE_PERIS, > }, { > /* Add similar elements here */ > }; > > void __init exynosxxx_clk_init(struct device_node *np) > { > [snip] > > match = of_match_node(cmu_subtype_match_table, np); > > if (!match) > panic("%s: cmu type (%s) is not supported.\n", __func__, > np->name); > > reg_base = of_iomap(np, 0); > if (!reg_base) > panic("%s: failed to map registers\n", __func__); > > cmu_type = (unsigned long) match->data; > > for (; i < CMU_TYPE_ALL; i++) { > clk_data = &exynosxxxx_clk_data[i]; > if (cmu_type == clk_data->cmu_type) > break; > } > > ctx = samsung_clk_init(np, reg_base, clk_data->nr_clks); > if (!ctx) > panic("%s: unable to alllocate ctx\n", __func__); > > if (clk_data->nr_pll_clocks) > samsung_clk_register_pll(ctx, clk_data->pll_clocks, > clk_data->nr_pll_clocks, > reg_base); > if (clk_data->nr_mux_clocks) > samsung_clk_register_mux(ctx, clk_data->mux_clocks, > clk_data->nr_mux_clocks); > if (clk_data->nr_div_clocks) > samsung_clk_register_div(ctx, clk_data->div_clocks, > clk_data->nr_div_clocks); > if (clk_data->nr_gate_clocks) > samsung_clk_register_gate(ctx, clk_data->gate_clocks, > clk_data->nr_gate_clocks); > if (cmu->nr_clk_regs) > exynosxxx_clk_sleep_init(reg_base, cmu->clk_regs, > cmu->nr_clk_regs); > [snip] > > } > CLK_OF_DECLARE(cmu_top, "exynosxxxx-cmu-top", exynosxxxx_clk_init); > CLK_OF_DECLARE(cmu_egl, "exynosxxxx-cmu-egl", exynosxxxx_clk_init); > /* add more clock domain entries here */ > > ======================================================= > >> diff --git a/drivers/clk/samsung/clk-exynos5260.h b/drivers/clk/samsung/clk-exynos5260.h >> new file mode 100644 >> index 0000000..7c3717a >> --- /dev/null >> +++ b/drivers/clk/samsung/clk-exynos5260.h >> @@ -0,0 +1,448 @@ >> +#ifndef __CLK_EXYNOS5260_H >> +#define __CLK_EXYNOS5260_H >> + > let me reply this along with Tomasz's comment in next message. Regards, Rahul Sharma > > Thanks, > Pankaj Dubey ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-07 18:41 ` Rahul Sharma @ 2014-03-08 4:53 ` Pankaj Dubey 0 siblings, 0 replies; 12+ messages in thread From: Pankaj Dubey @ 2014-03-08 4:53 UTC (permalink / raw) To: linux-arm-kernel On 03/08/2014 03:41 AM, Rahul Sharma wrote: > HI Pankaj, > > On 7 March 2014 19:26, Pankaj Dubey <pankaj.dubey@samsung.com> wrote: >> Hi Rahul, >> >> On Thu, Mar 6, 2014 at 10:45 PM, Rahul Sharma <rahul.sharma@samsung.com> wrote: >>> Add support for exynos5260 clocks in clock driver. >>> >>> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> >>> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> >> Even though my signed-off-by is present in this patch I can't see my >> email-id in cc list. Please check why? > Yea this is strange. I always use git send. let me check it. I will also add > you manually for next version. > >> [snip] >> >>> +#include "clk-exynos5260.h" >>> +#include "clk.h" >>> +#include "clk-pll.h" >>> + >>> +#include <dt-bindings/clk/exynos5260-clk.h> >> Better to move "exynos5260-clk.h" from "dt-bindings/clk" to "dt-bindings/clock" >> as patch for moving all such headers already landed and looks good also. >> > yea correct. I changed this. > >> [snip] >> >>> +/* >>> + * Applicable for all 2550 Type PLLS for Exynos5260, listed below >>> + * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, >>> + * BUS_PLL, MEDIA_PLL, G3D_PLL. >>> + */ >>> +static const struct samsung_pll_rate_table pll2550_24mhz_tbl[] = { >> shouldn't we mark rate_table with __initconst? >> > added. Not only this, but for all const struct samsung_pll_rate_table in this file. > >> [snip] >> >>> + * Applicable for 2650 Type PLL for AUD_PLL. >>> + */ >>> +static const struct samsung_pll_rate_table pll2650_24mhz_tbl[] = { >> Ditto. >> >> [snip] >> >>> +#else >>> +static void exynos5260_clk_sleep_init(void) {} >> This will fail to compile if CONFIG_PM_SLEEP is not defined. Keep function >> signature same. >> > Done. > >>> +#endif >>> + >>> +static struct samsung_clk_provider * >>> +__init exynos5260_cmu_register_one(struct device_node *np, >>> + struct exynos5260_cmu_info *cmu) >>> +{ >>> + void __iomem *reg_base; >>> + struct samsung_clk_provider *ctx; >>> + >>> + reg_base = of_iomap(np, 0); >>> + if (!reg_base) >>> + panic("%s: failed to map registers\n", __func__); >>> + >>> + ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids); >>> + if (!ctx) >>> + panic("%s: unable to alllocate ctx\n", __func__); >>> + >>> + if (cmu->pll_clks) >>> + samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks, >>> + reg_base); >>> + if (cmu->mux_clks) >>> + samsung_clk_register_mux(ctx, cmu->mux_clks, >>> + cmu->nr_mux_clks); >>> + if (cmu->div_clks) >>> + samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks); >>> + if (cmu->gate_clks) >>> + samsung_clk_register_gate(ctx, cmu->gate_clks, >>> + cmu->nr_gate_clks); >>> + if (cmu->clk_regs) >>> + exynos5260_clk_sleep_init(reg_base, cmu->clk_regs, >>> + cmu->nr_clk_regs); >>> + >>> + return ctx; >> As far as I can see only one user of this return "ctx" is only >> "exynos5260_clk_top_init", other init functions just ignoring this >> return value. >> This can be avoided if we register "fin_pll" (as well as all phyclocks >> as they are also fixed rate clocks) clock via DT. >> As I have already done it for another ExynosXXX SoC and it worked for >> me, on the same hand when today I tried this on Exynos5260, I can see >> it's working well and I can register "fin_pll" as "fixed_clock" via DT >> and kernel booted without any issues. Late registration of parent >> clock does not causing any issues and CCF takes care of that. > Hmmn... thats why we are able to chain multiple CMUs :). But I consistently > see "divide by zero" asserts during mct init. I will send you the logs > offline. If > I just ensure that "fin_pll" registers before other CMUs, no problem. I am > surprised why you are not getting this issue. > >> If required I can send the changes internally or if you are OK I can > If fix is in same file/dt please highlight those here else; better you post a > independent fix. Even UART behaves weird in my setup with IGNORE flag > removed. OK. Apart from removing fixed clock registration related code from clk-exynos5260.c and clk-exynos5260.h (remove FIN_PLL macros renumber other CMU_TOP clock ids), following changes are required in exynos5260 DT file, so that fixed clocks can be registered via DT and used. Changes in exynos5260-xyref5260-evt0.dts clocks { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - fin_pll: oscillator at 0 { - compatible = "samsung,exynos5260-oscclk"; + fin_pll: clock-fin-pll { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + }; + Changes in exynos5260.dtsi mct: mct at 100B0000 { compatible = "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; - clocks = <&clock_top FIN_PLL>, <&clock_peri PERI_CLK_MCT>; + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; clock-names = "fin_pll", "mct"; With above changes it's working well for me. Thanks, Pankaj Dubey > > Rest of the changes are pretty trivial. I should be able to handle this. > >> also upload next version of this patch with this fix, along with >> addressing all other comments . >> >> [snip] >> >>> +struct samsung_fixed_rate_clock fixed_rate_ext_clks[] __initdata = { >>> + FRATE(FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0), >>> +}; >> In this version you removed other fixed clocks (phyclks and ioclks) >> but I can not see corresponding DT patches where it has been moved. >> Or am I missing anything here? > I will update DT patch set. Those are already dependent on dt based probe > for sysram. I will be updating the next week, probably. > >> [snip] >> >>> +static void __init exynos5260_clk_top_init(struct device_node *np) >>> +{ >>> + struct exynos5260_cmu_info cmu; >>> + struct samsung_clk_provider *ctx; >>> + >>> + memset(&cmu, 0, sizeof(cmu)); >>> + >>> + cmu.pll_clks = top_pll_clks; >>> + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); >>> + cmu.mux_clks = top_mux_clks; >>> + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); >>> + cmu.div_clks = top_div_clks; >>> + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); >>> + cmu.gate_clks = top_gate_clks; >>> + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); >>> + cmu.nr_clk_ids = TOP_NR_CLK; >>> + cmu.clk_regs = top_clk_regs; >>> + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); >>> + >>> + ctx = exynos5260_cmu_register_one(np, &cmu); >>> + >>> + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, >>> + ARRAY_SIZE(fixed_rate_ext_clks), >>> + ext_clk_match); >>> +} >>> + >>> +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", >>> + exynos5260_clk_top_init); >> Well with this approach we end up adding 14 such >> exynosxxx_clk_xxx_init functions all of which has similar lines of >> code. As I know there are many upcoming Exynos SoC which will also >> have similar multiple clock controllers (in some of them there are >> upto 25 clock domains, and in that case we will end up writing 25 such >> init functions) so I have following suggestion where we can have one >> more structure which will hold all static data and match_table to >> match compatibility string and return CMU_TYPE which can be mapped to >> get proper clock_data which can be used in single clock_init function. >> Following is some sample code which I have implemented and tested on >> one of Exynos SoC. Please let me know your opinion about this. >> >> ============================= >> >> static struct exynosxxxx_clock_data exynosxxxx_clk_data[] __initdata = { >> { >> .cmu_type = CMU_TYPE_TOP, >> .mux_clocks = top_mux_clks, >> .div_clocks = top_div_clks, >> .pll_clocks = top_pll_clks, >> .clk_regs = top_clk_regs, >> .nr_mux_clocks = ARRAY_SIZE(top_mux_clks), >> .nr_div_clocks = ARRAY_SIZE(top_div_clks), >> .nr_pll_clocks = ARRAY_SIZE(top_pll_clks), >> .nr_clk_regs = ARRAY_SIZE(top_clk_regs), >> .nr_clks = TOP_NR_CLK, >> }, { >> .cmu_type = CMU_TYPE_EGL, >> .mux_clocks = egl_mux_clks, >> .div_clocks = egl_div_clks, >> .pll_clocks = egl_pll_clks, >> .clk_regs = egl_clk_regs, >> .nr_mux_clocks = ARRAY_SIZE(egl_mux_clks), >> .nr_div_clocks = ARRAY_SIZE(egl_div_clks), >> .nr_pll_clocks = ARRAY_SIZE(egl_pll_clks), >> .nr_clk_regs = ARRAY_SIZE(egl_clk_regs), >> .nr_clks = EGL_NR_CLK, >> }, { >> /* Add similar elements here */ >> }; >> >> static struct of_device_id cmu_subtype_match_table[] = { >> { >> .compatible = "exynosxxxx-cmu-top", >> .data = (void *)CMU_TYPE_TOP, >> }, { >> .compatible = "exynosxxx-cmu-peris", >> .data = (void *)CMU_TYPE_PERIS, >> }, { >> /* Add similar elements here */ >> }; >> >> void __init exynosxxx_clk_init(struct device_node *np) >> { >> [snip] >> >> match = of_match_node(cmu_subtype_match_table, np); >> >> if (!match) >> panic("%s: cmu type (%s) is not supported.\n", __func__, >> np->name); >> >> reg_base = of_iomap(np, 0); >> if (!reg_base) >> panic("%s: failed to map registers\n", __func__); >> >> cmu_type = (unsigned long) match->data; >> >> for (; i < CMU_TYPE_ALL; i++) { >> clk_data = &exynosxxxx_clk_data[i]; >> if (cmu_type == clk_data->cmu_type) >> break; >> } >> >> ctx = samsung_clk_init(np, reg_base, clk_data->nr_clks); >> if (!ctx) >> panic("%s: unable to alllocate ctx\n", __func__); >> >> if (clk_data->nr_pll_clocks) >> samsung_clk_register_pll(ctx, clk_data->pll_clocks, >> clk_data->nr_pll_clocks, >> reg_base); >> if (clk_data->nr_mux_clocks) >> samsung_clk_register_mux(ctx, clk_data->mux_clocks, >> clk_data->nr_mux_clocks); >> if (clk_data->nr_div_clocks) >> samsung_clk_register_div(ctx, clk_data->div_clocks, >> clk_data->nr_div_clocks); >> if (clk_data->nr_gate_clocks) >> samsung_clk_register_gate(ctx, clk_data->gate_clocks, >> clk_data->nr_gate_clocks); >> if (cmu->nr_clk_regs) >> exynosxxx_clk_sleep_init(reg_base, cmu->clk_regs, >> cmu->nr_clk_regs); >> [snip] >> >> } >> CLK_OF_DECLARE(cmu_top, "exynosxxxx-cmu-top", exynosxxxx_clk_init); >> CLK_OF_DECLARE(cmu_egl, "exynosxxxx-cmu-egl", exynosxxxx_clk_init); >> /* add more clock domain entries here */ >> >> ======================================================= >> >>> diff --git a/drivers/clk/samsung/clk-exynos5260.h b/drivers/clk/samsung/clk-exynos5260.h >>> new file mode 100644 >>> index 0000000..7c3717a >>> --- /dev/null >>> +++ b/drivers/clk/samsung/clk-exynos5260.h >>> @@ -0,0 +1,448 @@ >>> +#ifndef __CLK_EXYNOS5260_H >>> +#define __CLK_EXYNOS5260_H >>> + > let me reply this along with Tomasz's comment in next message. > > Regards, > Rahul Sharma > >> Thanks, >> Pankaj Dubey -- Best Regards, Pankaj Dubey ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v4 0/5] clk: exynos: add support for exynos5260 SoC
@ 2014-03-04 11:12 Rahul Sharma
2014-03-04 11:12 ` [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 Rahul Sharma
0 siblings, 1 reply; 12+ messages in thread
From: Rahul Sharma @ 2014-03-04 11:12 UTC (permalink / raw)
To: linux-arm-kernel
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Add clock support for exynos5260 SoC.
This series is based on Kukjin's for-next and
Mike's clk-next branches.
V4:
1) Rework clock file as per Tomasz review comments at
http://www.spinics.net/lists/arm-kernel/msg310116.html.
V3:
1) Removed "samsung,exynos5260-clock" property from clock files.
2) Replaced "__SPIN_LOCK_UNLOCKED(lock)" with spin_lock_init.
3) Removed '(' and ')' around numeric constants in macros.
V2:
1) Move suspend resume handling to Exynos5410 Clock file.
2) Removed Unused Macros and Condition checks for Exynos5260.
3) Add spin lock to clock provider context.
4) Add clock provider context for Exynos5410.
5) Uniform implementation for callbacks for PLL2550xx.
6) Split Exynos5260 clock file patch to bring it under 100 Kb limit.
7) Replace aclk/pclk/hclk gates with combined gates.
8) Remove CLK_IGNORE_UNUSED flag for gate clocks.
Pankaj Dubey (1):
clk/samsung: add support for pll2550xx
Rahul Sharma (4):
clk/samsung: add support for multiple clock providers
clk/samsung: add support for pll2650xx
clk/exynos5260: add macros and documentation for exynos5260
clk/exynos5260: add clock file for exynos5260
.../devicetree/bindings/clock/exynos5260-clock.txt | 55 +
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-exynos4.c | 47 +-
drivers/clk/samsung/clk-exynos5250.c | 25 +-
drivers/clk/samsung/clk-exynos5260.c | 1933 ++++++++++++++++++++
drivers/clk/samsung/clk-exynos5260.h | 448 +++++
drivers/clk/samsung/clk-exynos5420.c | 24 +-
drivers/clk/samsung/clk-exynos5440.c | 18 +-
drivers/clk/samsung/clk-pll.c | 222 ++-
drivers/clk/samsung/clk-pll.h | 2 +
drivers/clk/samsung/clk-s3c64xx.c | 44 +-
drivers/clk/samsung/clk.c | 115 +-
drivers/clk/samsung/clk.h | 72 +-
include/dt-bindings/clk/exynos5260-clk.h | 233 +++
14 files changed, 3090 insertions(+), 149 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/exynos5260-clock.txt
create mode 100644 drivers/clk/samsung/clk-exynos5260.c
create mode 100644 drivers/clk/samsung/clk-exynos5260.h
create mode 100644 include/dt-bindings/clk/exynos5260-clk.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 2014-03-04 11:12 [PATCH v4 0/5] clk: exynos: add support for exynos5260 SoC Rahul Sharma @ 2014-03-04 11:12 ` Rahul Sharma 0 siblings, 0 replies; 12+ messages in thread From: Rahul Sharma @ 2014-03-04 11:12 UTC (permalink / raw) To: linux-arm-kernel Add support for exynos5260 clocks in clock driver. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> --- drivers/clk/samsung/Makefile | 1 + drivers/clk/samsung/clk-exynos5260.c | 1933 ++++++++++++++++++++++++++++++++++ drivers/clk/samsung/clk-exynos5260.h | 448 ++++++++ 3 files changed, 2382 insertions(+) create mode 100644 drivers/clk/samsung/clk-exynos5260.c create mode 100644 drivers/clk/samsung/clk-exynos5260.h diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile index 77313e2..56e7d38 100644 --- a/drivers/clk/samsung/Makefile +++ b/drivers/clk/samsung/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o +obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c new file mode 100644 index 0000000..d5e405c --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5260.c @@ -0,0 +1,1933 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Common Clock Framework support for Exynos5260 SoC. + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/syscore_ops.h> + +#include "clk-exynos5260.h" +#include "clk.h" +#include "clk-pll.h" + +#include <dt-bindings/clk/exynos5260-clk.h> + +static LIST_HEAD(clock_reg_cache_list); + +struct exynos5260_clock_reg_cache { + struct list_head node; + void __iomem *reg_base; + struct samsung_clk_reg_dump *rdump; + unsigned int rd_num; +}; + +struct exynos5260_cmu_info { + /* list and number of pll clocks */ + struct samsung_pll_clock *pll_clks; + unsigned int nr_pll_clks; + /* list and number of mux clocks */ + struct samsung_mux_clock *mux_clks; + unsigned int nr_mux_clks; + /* list and number of div clocks */ + struct samsung_div_clock *div_clks; + unsigned int nr_div_clks; + /* list and number of gate clocks */ + struct samsung_gate_clock *gate_clks; + unsigned int nr_gate_clks; + /* total number of clocks */ + unsigned int nr_clk_ids; + + /* list and number of clocks registers */ + unsigned long *clk_regs; + unsigned int nr_clk_regs; +}; + +/* + * Applicable for all 2550 Type PLLS for Exynos5260, listed below + * DISP_PLL, EGL_PLL, KFC_PLL, MEM_PLL, + * BUS_PLL, MEDIA_PLL, G3D_PLL. + */ +static const struct samsung_pll_rate_table pll2550_24mhz_tbl[] = { + PLL_35XX_RATE(1700000000, 425, 6, 0), + PLL_35XX_RATE(1600000000, 200, 3, 0), + PLL_35XX_RATE(1500000000, 250, 4, 0), + PLL_35XX_RATE(1400000000, 175, 3, 0), + PLL_35XX_RATE(1300000000, 325, 6, 0), + PLL_35XX_RATE(1200000000, 400, 4, 1), + PLL_35XX_RATE(1100000000, 275, 3, 1), + PLL_35XX_RATE(1000000000, 250, 3, 1), + PLL_35XX_RATE(933000000, 311, 4, 1), + PLL_35XX_RATE(900000000, 300, 4, 1), + PLL_35XX_RATE(800000000, 200, 3, 1), + PLL_35XX_RATE(733000000, 733, 12, 1), + PLL_35XX_RATE(700000000, 175, 3, 1), + PLL_35XX_RATE(667000000, 667, 12, 1), + PLL_35XX_RATE(633000000, 211, 4, 1), + PLL_35XX_RATE(620000000, 310, 3, 2), + PLL_35XX_RATE(600000000, 400, 4, 2), + PLL_35XX_RATE(543000000, 362, 4, 2), + PLL_35XX_RATE(533000000, 533, 6, 2), + PLL_35XX_RATE(500000000, 250, 3, 2), + PLL_35XX_RATE(450000000, 300, 4, 2), + PLL_35XX_RATE(400000000, 200, 3, 2), + PLL_35XX_RATE(350000000, 175, 3, 2), + PLL_35XX_RATE(300000000, 400, 4, 3), + PLL_35XX_RATE(266000000, 266, 3, 3), + PLL_35XX_RATE(200000000, 200, 3, 3), + PLL_35XX_RATE(160000000, 160, 3, 3), +}; + +/* + * Applicable for 2650 Type PLL for AUD_PLL. + */ +static const struct samsung_pll_rate_table pll2650_24mhz_tbl[] = { + PLL_36XX_RATE(1600000000, 200, 3, 0, 0), + PLL_36XX_RATE(1200000000, 100, 2, 0, 0), + PLL_36XX_RATE(1000000000, 250, 3, 1, 0), + PLL_36XX_RATE(800000000, 200, 3, 1, 0), + PLL_36XX_RATE(600000000, 100, 2, 1, 0), + PLL_36XX_RATE(532000000, 266, 3, 2, 0), + PLL_36XX_RATE(480000000, 160, 2, 2, 0), + PLL_36XX_RATE(432000000, 144, 2, 2, 0), + PLL_36XX_RATE(400000000, 200, 3, 2, 0), + PLL_36XX_RATE(394073130, 459, 7, 2, 49282), + PLL_36XX_RATE(333000000, 111, 2, 2, 0), + PLL_36XX_RATE(300000000, 100, 2, 2, 0), + PLL_36XX_RATE(266000000, 266, 3, 3, 0), + PLL_36XX_RATE(200000000, 200, 3, 3, 0), + PLL_36XX_RATE(166000000, 166, 3, 3, 0), + PLL_36XX_RATE(133000000, 266, 3, 4, 0), + PLL_36XX_RATE(100000000, 200, 3, 4, 0), + PLL_36XX_RATE(66000000, 176, 2, 5, 0), +}; + +static struct of_device_id ext_clk_match[] __initdata = { + { .compatible = "samsung,exynos5260-oscclk", .data = (void *)0, }, + { }, +}; + +#ifdef CONFIG_PM_SLEEP + +static int exynos5260_clk_suspend(void) +{ + struct exynos5260_clock_reg_cache *cache; + + list_for_each_entry(cache, &clock_reg_cache_list, node) + samsung_clk_save(cache->reg_base, cache->rdump, + cache->rd_num); + + return 0; +} + +static void exynos5260_clk_resume(void) +{ + struct exynos5260_clock_reg_cache *cache; + + list_for_each_entry(cache, &clock_reg_cache_list, node) + samsung_clk_restore(cache->reg_base, cache->rdump, + cache->rd_num); +} + +static struct syscore_ops exynos5260_clk_syscore_ops = { + .suspend = exynos5260_clk_suspend, + .resume = exynos5260_clk_resume, +}; + +static void exynos5260_clk_sleep_init(void __iomem *reg_base, + unsigned long *rdump, + unsigned long nr_rdump) +{ + struct exynos5260_clock_reg_cache *reg_cache; + + reg_cache = kzalloc(sizeof(struct exynos5260_clock_reg_cache), + GFP_KERNEL); + if (!reg_cache) + panic("could not allocate register cache.\n"); + + reg_cache->rdump = samsung_clk_alloc_reg_dump(rdump, nr_rdump); + + if (!reg_cache->rdump) + panic("could not allocate register dump storage.\n"); + + if (list_empty(&clock_reg_cache_list)) + register_syscore_ops(&exynos5260_clk_syscore_ops); + + reg_cache->rd_num = nr_rdump; + reg_cache->reg_base = reg_base; + list_add_tail(®_cache->node, &clock_reg_cache_list); +} + +#else +static void exynos5260_clk_sleep_init(void) {} +#endif + +static struct samsung_clk_provider * +__init exynos5260_cmu_register_one(struct device_node *np, + struct exynos5260_cmu_info *cmu) +{ + void __iomem *reg_base; + struct samsung_clk_provider *ctx; + + reg_base = of_iomap(np, 0); + if (!reg_base) + panic("%s: failed to map registers\n", __func__); + + ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids); + if (!ctx) + panic("%s: unable to alllocate ctx\n", __func__); + + if (cmu->pll_clks) + samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks, + reg_base); + if (cmu->mux_clks) + samsung_clk_register_mux(ctx, cmu->mux_clks, + cmu->nr_mux_clks); + if (cmu->div_clks) + samsung_clk_register_div(ctx, cmu->div_clks, cmu->nr_div_clks); + if (cmu->gate_clks) + samsung_clk_register_gate(ctx, cmu->gate_clks, + cmu->nr_gate_clks); + if (cmu->clk_regs) + exynos5260_clk_sleep_init(reg_base, cmu->clk_regs, + cmu->nr_clk_regs); + + return ctx; +} + + +/* CMU_AUD */ + +static unsigned long aud_clk_regs[] __initdata = { + MUX_SEL_AUD, + DIV_AUD0, + DIV_AUD1, + EN_ACLK_AUD, + EN_PCLK_AUD, + EN_SCLK_AUD, + EN_IP_AUD, +}; + +PNAME(mout_aud_pll_user_p) = {"fin_pll", "fout_aud_pll"}; +PNAME(mout_sclk_aud_i2s_p) = {"mout_aud_pll_user", "ioclk_i2s_cdclk"}; +PNAME(mout_sclk_aud_pcm_p) = {"mout_aud_pll_user", "ioclk_pcm_extclk"}; + +struct samsung_mux_clock aud_mux_clks[] __initdata = { + MUX(0, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p, + MUX_SEL_AUD, 8, 1), + MUX(0, "mout_sclk_aud_i2s", mout_sclk_aud_i2s_p, + MUX_SEL_AUD, 4, 1), + MUX(0, "mout_aud_pll_user", mout_aud_pll_user_p, + MUX_SEL_AUD, 0, 1), +}; + +struct samsung_div_clock aud_div_clks[] __initdata = { + DIV(0, "dout_aclk_aud_131", "mout_aud_pll_user", + DIV_AUD0, 0, 4), + DIV(0, "dout_sclk_aud_uart", "mout_aud_pll_user", + DIV_AUD1, 12, 4), + DIV(0, "dout_sclk_aud_pcm", "mout_sclk_aud_pcm", + DIV_AUD1, 4, 8), + DIV(0, "dout_sclk_aud_i2s", "mout_sclk_aud_i2s", + DIV_AUD1, 0, 4), +}; + +struct samsung_gate_clock aud_gate_clks[] __initdata = { + GATE(AUD_CLK_AUD_UART, "clk_aud_uart", "dout_aclk_aud_131", + EN_IP_AUD, 4, 0, 0), + GATE(AUD_CLK_PCM, "clk_pcm", "dout_aclk_aud_131", EN_IP_AUD, 3, 0, 0), + GATE(AUD_CLK_I2S, "clk_i2s", "dout_aclk_aud_131", EN_IP_AUD, 2, 0, 0), + GATE(AUD_CLK_DMAC, "clk_dmac", "dout_aclk_aud_131", + EN_IP_AUD, 1, 0, 0), + GATE(0, "clk_sramc", "dout_aclk_aud_131", EN_IP_AUD, 0, 0, 0), + + GATE(AUD_SCLK_AUD_UART, "sclk_aud_uart", "dout_sclk_aud_uart", + EN_SCLK_AUD, 2, CLK_SET_RATE_PARENT, 0), + GATE(AUD_SCLK_PCM, "sclk_aud_pcm", "dout_sclk_aud_pcm", + EN_SCLK_AUD, 1, CLK_SET_RATE_PARENT, 0), + GATE(AUD_SCLK_I2S, "sclk_aud_i2s", "dout_sclk_aud_i2s", + EN_SCLK_AUD, 0, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_aud_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = aud_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(aud_mux_clks); + cmu.div_clks = aud_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(aud_div_clks); + cmu.gate_clks = aud_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(aud_gate_clks); + cmu.nr_clk_ids = AUD_NR_CLK; + cmu.clk_regs = aud_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(aud_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_aud, "samsung,exynos5260-clock-aud", + exynos5260_clk_aud_init); + + +/* CMU_DISP */ + +static unsigned long disp_clk_regs[] __initdata = { + MUX_SEL_DISP0, + MUX_SEL_DISP1, + MUX_SEL_DISP2, + MUX_SEL_DISP3, + MUX_SEL_DISP4, + DIV_DISP, + EN_ACLK_DISP, + EN_PCLK_DISP, + EN_SCLK_DISP0, + EN_SCLK_DISP1, + EN_IP_DISP, + EN_IP_DISP_BUS, +}; + +PNAME(mout_phyclk_dptx_phy_ch3_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch3_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch2_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch2_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch1_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch1_txd_clk"}; +PNAME(mout_phyclk_dptx_phy_ch0_txd_clk_user_p) = {"fin_pll", + "phyclk_dptx_phy_ch0_txd_clk"}; + +PNAME(mout_aclk_disp_222_user_p) = {"fin_pll", "dout_aclk_disp_222"}; +PNAME(mout_sclk_disp_pixel_user_p) = {"fin_pll", "dout_sclk_disp_pixel"}; +PNAME(mout_aclk_disp_333_user_p) = {"fin_pll", "dout_aclk_disp_333"}; +PNAME(mout_phyclk_hdmi_phy_tmds_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_tmds_clko"}; +PNAME(mout_phyclk_hdmi_phy_ref_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_ref_clko"}; +PNAME(mout_phyclk_hdmi_phy_pixel_clko_user_p) = {"fin_pll", + "phyclk_hdmi_phy_pixel_clko"}; +PNAME(mout_phyclk_hdmi_link_o_tmds_clkhi_user_p) = {"fin_pll", + "phyclk_hdmi_link_o_tmds_clkhi"}; +PNAME(mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p) = {"fin_pll", + "phyclk_mipi_dphy_4l_m_txbyte_clkhs"}; +PNAME(mout_phyclk_dptx_phy_o_ref_clk_24m_user_p) = {"fin_pll", + "phyclk_dptx_phy_o_ref_clk_24m"}; +PNAME(mout_phyclk_dptx_phy_clk_div2_user_p) = {"fin_pll", + "phyclk_dptx_phy_clk_div2"}; +PNAME(mout_sclk_dsim1_tx_clk_esc_clk_user_p) = {"fin_pll", + "sclk_dsim1_txclkescclk"}; +PNAME(mout_sclk_dsim1_tx_clk_esc3_user_p) = {"fin_pll", + "sclk_dsim1_txclkesc3"}; +PNAME(mout_sclk_dsim1_tx_clk_esc2_user_p) = {"fin_pll", + "sclk_dsim1_txclkesc2"}; +PNAME(mout_sclk_dsim1_tx_clk_esc1_user_p) = {"fin_pll", + "sclk_dsim1_txclkesc1"}; +PNAME(mout_sclk_dsim1_tx_clk_esc0_user_p) = {"fin_pll", + "sclk_dsim1_txclkesc0"}; +PNAME(mout_sclk_hdmi_pixel_p) = {"mout_sclk_disp_pixel_user", + "mout_aclk_disp_222_user"}; +PNAME(mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p) = {"fin_pll", + "phyclk_mipi_dphy_4l_m_rxclkesc0"}; +PNAME(mout_sclk_hdmi_spdif_p) = {"fin_pll", "ioclk_spdif_extclk", + "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"}; + +struct samsung_mux_clock disp_mux_clks[] __initdata = { + MUX(0, "mout_sclk_hdmi_spdif", mout_sclk_hdmi_spdif_p, + MUX_SEL_DISP4, 4, 2), + + MUX(0, "mout_sclk_dsim1_tx_clk_esc_clk_user", + mout_sclk_dsim1_tx_clk_esc_clk_user_p, + MUX_SEL_DISP2, 28, 1), + MUX(0, "mout_sclk_dsim1_tx_clk_esc3_user", + mout_sclk_dsim1_tx_clk_esc3_user_p, + MUX_SEL_DISP2, 24, 1), + MUX(0, "mout_sclk_dsim1_tx_clk_esc2_user", + mout_sclk_dsim1_tx_clk_esc2_user_p, + MUX_SEL_DISP2, 20, 1), + MUX(0, "mout_sclk_dsim1_tx_clk_esc1_user", + mout_sclk_dsim1_tx_clk_esc1_user_p, + MUX_SEL_DISP2, 16, 1), + MUX(0, "mout_sclk_dsim1_tx_clk_esc0_user", + mout_sclk_dsim1_tx_clk_esc0_user_p, + MUX_SEL_DISP2, 12, 1), + MUX(0, "mout_sclk_hdmi_pixel", mout_sclk_hdmi_pixel_p, + MUX_SEL_DISP2, 4, 1), + MUX(0, "mout_phyclk_mipi_dphy_4lmrxclk_esc0_user", + mout_phyclk_mipi_dphy_4lmrxclk_esc0_user_p, + MUX_SEL_DISP2, 0, 1), + + MUX(0, "mout_phyclk_hdmi_phy_tmds_clko_user", + mout_phyclk_hdmi_phy_tmds_clko_user_p, + MUX_SEL_DISP1, 28, 1), + MUX(0, "mout_phyclk_hdmi_phy_ref_clko_user", + mout_phyclk_hdmi_phy_ref_clko_user_p, + MUX_SEL_DISP1, 24, 1), + MUX(DISP_MOUT_HDMI_PHY_PIXEL, "mout_phyclk_hdmi_phy_pixel_clko_user", + mout_phyclk_hdmi_phy_pixel_clko_user_p, + MUX_SEL_DISP1, 20, 1), + MUX(0, "mout_phyclk_hdmi_link_o_tmds_clkhi_user", + mout_phyclk_hdmi_link_o_tmds_clkhi_user_p, + MUX_SEL_DISP1, 16, 1), + MUX(0, "mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs", + mout_phyclk_mipi_dphy_4l_m_txbyte_clkhs_p, + MUX_SEL_DISP1, 8, 1), + MUX(0, "mout_phyclk_dptx_phy_o_ref_clk_24m_user", + mout_phyclk_dptx_phy_o_ref_clk_24m_user_p, + MUX_SEL_DISP1, 4, 1), + MUX(0, "mout_phyclk_dptx_phy_clk_div2_user", + mout_phyclk_dptx_phy_clk_div2_user_p, + MUX_SEL_DISP1, 0, 1), + + MUX(0, "mout_phyclk_dptx_phy_ch3_txd_clk_user", + mout_phyclk_dptx_phy_ch3_txd_clk_user_p, + MUX_SEL_DISP0, 28, 1), + MUX(0, "mout_phyclk_dptx_phy_ch2_txd_clk_user", + mout_phyclk_dptx_phy_ch2_txd_clk_user_p, + MUX_SEL_DISP0, 24, 1), + MUX(0, "mout_phyclk_dptx_phy_ch1_txd_clk_user", + mout_phyclk_dptx_phy_ch1_txd_clk_user_p, + MUX_SEL_DISP0, 20, 1), + MUX(0, "mout_phyclk_dptx_phy_ch0_txd_clk_user", + mout_phyclk_dptx_phy_ch0_txd_clk_user_p, + MUX_SEL_DISP0, 16, 1), + MUX(0, "mout_aclk_disp_222_user", mout_aclk_disp_222_user_p, + MUX_SEL_DISP0, 8, 1), + MUX(0, "mout_sclk_disp_pixel_user", mout_sclk_disp_pixel_user_p, + MUX_SEL_DISP0, 4, 1), + MUX(0, "mout_aclk_disp_333_user", mout_aclk_disp_333_user_p, + MUX_SEL_DISP0, 0, 1), +}; + +struct samsung_div_clock disp_div_clks[] __initdata = { + DIV(0, "dout_sclk_hdmi_phy_pixel_clki", "mout_sclk_hdmi_pixel", + DIV_DISP, 16, 4), + DIV(0, "dout_sclk_fimd1_extclkpll", "mout_sclk_disp_pixel_user", + DIV_DISP, 12, 4), + DIV(0, "dout_pclk_disp_111", "mout_aclk_disp_222_user", + DIV_DISP, 8, 4), +}; + +struct samsung_gate_clock disp_gate_clks[] __initdata = { + GATE(DISP_CLK_SMMU_TV, "clk_smmu3_tv", "mout_aclk_disp_222_user", + EN_IP_DISP, 25, 0, 0), + GATE(DISP_CLK_SMMU_FIMD1M1, "clk_smmu3_fimd1m1", + "mout_aclk_disp_222_user", + EN_IP_DISP, 23, 0, 0), + GATE(DISP_CLK_SMMU_FIMD1M0, "clk_smmu3_fimd1m0", + "mout_aclk_disp_222_user", + EN_IP_DISP, 22, 0, 0), + GATE(0, "clk_pixel_mixer", "mout_aclk_disp_222_user", + EN_IP_DISP, 13, CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_pixel_disp", "mout_aclk_disp_222_user", + EN_IP_DISP, 12, CLK_IGNORE_UNUSED, 0), + GATE(DISP_CLK_MIXER, "clk_mixer", "mout_aclk_disp_222_user", + EN_IP_DISP, 11, 0, 0), + GATE(DISP_CLK_MIPIPHY, "clk_mipi_dphy", "mout_aclk_disp_222_user", + EN_IP_DISP, 10, 0, 0), + GATE(DISP_CLK_HDMIPHY, "clk_hdmiphy", "mout_aclk_disp_222_user", + EN_IP_DISP, 9, 0, 0), + GATE(DISP_CLK_HDMI, "clk_hdmi", "mout_aclk_disp_222_user", + EN_IP_DISP, 8, 0, 0), + GATE(DISP_CLK_FIMD1, "clk_fimd1", "mout_aclk_disp_222_user", + EN_IP_DISP, 7, 0, 0), + GATE(DISP_CLK_DSIM1, "clk_dsim1", "mout_aclk_disp_222_user", + EN_IP_DISP, 6, 0, 0), + GATE(DISP_CLK_DPPHY, "clk_dptx_phy", "mout_aclk_disp_222_user", + EN_IP_DISP, 5, 0, 0), + GATE(DISP_CLK_DP, "clk_dptx_link", "mout_aclk_disp_222_user", + EN_IP_DISP, 4, 0, 0), + + GATE(DISP_SCLK_PIXEL, "sclk_hdmi_phy_pixel_clki", + "dout_sclk_hdmi_phy_pixel_clki", + EN_SCLK_DISP0, 29, CLK_SET_RATE_PARENT, 0), + GATE(DISP_MOUT_HDMI_PHY_PIXEL_USER, "sclk_hdmi_link_i_pixel", + "mout_phyclk_hdmi_phy_pixel_clko_user", + EN_SCLK_DISP0, 26, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_disp_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = disp_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(disp_mux_clks); + cmu.div_clks = disp_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(disp_div_clks); + cmu.gate_clks = disp_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(disp_gate_clks); + cmu.nr_clk_ids = DISP_NR_CLK; + cmu.clk_regs = disp_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(disp_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_disp, "samsung,exynos5260-clock-disp", + exynos5260_clk_disp_init); + + +/* CMU_EGL */ + +static unsigned long egl_clk_regs[] __initdata = { + EGL_PLL_LOCK, + EGL_PLL_CON0, + EGL_PLL_CON1, + EGL_PLL_FREQ_DET, + MUX_SEL_EGL, + MUX_ENABLE_EGL, + DIV_EGL, + DIV_EGL_PLL_FDET, + EN_ACLK_EGL, + EN_PCLK_EGL, + EN_SCLK_EGL, +}; + +PNAME(mout_egl_b_p) = {"mout_egl_pll", "dout_bus_pll"}; +PNAME(mout_egl_pll_p) = {"fin_pll", "fout_egl_pll"}; + +struct samsung_mux_clock egl_mux_clks[] __initdata = { + MUX(0, "mout_egl_b", mout_egl_b_p, MUX_SEL_EGL, 16, 1), + MUX(0, "mout_egl_pll", mout_egl_pll_p, MUX_SEL_EGL, 4, 1), +}; + +struct samsung_div_clock egl_div_clks[] __initdata = { + DIV(0, "dout_egl_pll", "mout_egl_b", DIV_EGL, 24, 3), + DIV(0, "dout_egl_pclk_dbg", "dout_egl_atclk", DIV_EGL, 20, 3), + DIV(0, "dout_egl_atclk", "dout_egl2", DIV_EGL, 16, 3), + DIV(0, "dout_pclk_egl", "dout_egl_atclk", DIV_EGL, 12, 3), + DIV(0, "dout_aclk_egl", "dout_egl2", DIV_EGL, 8, 3), + DIV(0, "dout_egl2", "dout_egl1", DIV_EGL, 4, 3), + DIV(0, "dout_egl1", "mout_egl_b", DIV_EGL, 0, 3), +}; + +static struct samsung_pll_clock egl_pll_clks[] __initdata = { + PLL(pll_2550xx, EGL_FOUT_EGL_PLL, "fout_egl_pll", "fin_pll", + EGL_PLL_LOCK, EGL_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_egl_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = egl_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(egl_pll_clks); + cmu.mux_clks = egl_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(egl_mux_clks); + cmu.div_clks = egl_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(egl_div_clks); + cmu.nr_clk_ids = EGL_NR_CLK; + cmu.clk_regs = egl_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(egl_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_egl, "samsung,exynos5260-clock-egl", + exynos5260_clk_egl_init); + + +/* CMU_FSYS */ + +static unsigned long fsys_clk_regs[] __initdata = { + MUX_SEL_FSYS0, + MUX_SEL_FSYS1, + EN_ACLK_FSYS, + EN_ACLK_FSYS_SECURE_RTIC, + EN_ACLK_FSYS_SECURE_SMMU_RTIC, + EN_SCLK_FSYS, + EN_IP_FSYS, + EN_IP_FSYS_SECURE_RTIC, + EN_IP_FSYS_SECURE_SMMU_RTIC, +}; + +PNAME(mout_phyclk_usbhost20_phyclk_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_phyclock"}; +PNAME(mout_phyclk_usbhost20_freeclk_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_freeclk"}; +PNAME(mout_phyclk_usbhost20_clk48mohci_user_p) = {"fin_pll", + "phyclk_usbhost20_phy_clk48mohci"}; +PNAME(mout_phyclk_usbdrd30_pipe_pclk_user_p) = {"fin_pll", + "phyclk_usbdrd30_udrd30_pipe_pclk"}; +PNAME(mout_phyclk_usbdrd30_phyclock_user_p) = {"fin_pll", + "phyclk_usbdrd30_udrd30_phyclock"}; + +struct samsung_mux_clock fsys_mux_clks[] __initdata = { + MUX(0, "mout_phyclk_usbhost20_phyclk_user", + mout_phyclk_usbhost20_phyclk_user_p, + MUX_SEL_FSYS1, 16, 1), + MUX(0, "mout_phyclk_usbhost20_freeclk_user", + mout_phyclk_usbhost20_freeclk_user_p, + MUX_SEL_FSYS1, 12, 1), + MUX(0, "mout_phyclk_usbhost20_clk48mohci_user", + mout_phyclk_usbhost20_clk48mohci_user_p, + MUX_SEL_FSYS1, 8, 1), + MUX(0, "mout_phyclk_usbdrd30_pipe_pclk_user", + mout_phyclk_usbdrd30_pipe_pclk_user_p, + MUX_SEL_FSYS1, 4, 1), + MUX(0, "mout_phyclk_usbdrd30_phyclock_user", + mout_phyclk_usbdrd30_phyclock_user_p, + MUX_SEL_FSYS1, 0, 1), +}; + +struct samsung_gate_clock fsys_gate_clks[] __initdata = { + GATE(FSYS_CLK_TSI, "clk_tsi", "dout_aclk_fsys_200", + EN_IP_FSYS, 20, 0, 0), + GATE(FSYS_CLK_USBLINK, "clk_usblink", "dout_aclk_fsys_200", + EN_IP_FSYS, 18, 0, 0), + GATE(FSYS_CLK_USBHOST20, "clk_usbhost20", "dout_aclk_fsys_200", + EN_IP_FSYS, 15, 0, 0), + GATE(FSYS_CLK_USBDRD30, "clk_usbdrd30", "dout_aclk_fsys_200", + EN_IP_FSYS, 14, 0, 0), + GATE(FSYS_CLK_SROMC, "clk_sromc", "dout_aclk_fsys_200", + EN_IP_FSYS, 13, 0, 0), + GATE(FSYS_CLK_PDMA, "clk_pdma", "dout_aclk_fsys_200", + EN_IP_FSYS, 9, 0, 0), + GATE(FSYS_CLK_MMC2, "clk_mmc2", "dout_aclk_fsys_200", + EN_IP_FSYS, 8, 0, 0), + GATE(FSYS_CLK_MMC1, "clk_mmc1", "dout_aclk_fsys_200", + EN_IP_FSYS, 7, 0, 0), + GATE(FSYS_CLK_MMC0, "clk_mmc0", "dout_aclk_fsys_200", + EN_IP_FSYS, 6, 0, 0), + + GATE(FSYS_CLK_RTIC, "clk_rtic", "mout_bustop_pll_user", + EN_IP_FSYS_SECURE_RTIC, 11, 0, 0), + GATE(FSYS_CLK_SMMU_RTIC, "clk_smmu_rtic", "mout_bustop_pll_user", + EN_IP_FSYS_SECURE_SMMU_RTIC, 12, 0, 0), + + GATE(FSYS_PHYCLK_USBDRD30, "phyclk_usbdrd30_udrd30_phyclock_g", + "mout_phyclk_usbdrd30_phyclock_user", + EN_SCLK_FSYS, 7, 0, 0), + GATE(FSYS_PHYCLK_USBHOST20, "phyclk_usbhost20_phyclock", + "mout_phyclk_usbdrd30_phyclock_user", + EN_SCLK_FSYS, 1, 0, 0), +}; + +static void __init exynos5260_clk_fsys_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = fsys_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks); + cmu.gate_clks = fsys_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(fsys_gate_clks); + cmu.nr_clk_ids = FSYS_NR_CLK; + cmu.clk_regs = fsys_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_fsys, "samsung,exynos5260-clock-fsys", + exynos5260_clk_fsys_init); + + +/* CMU_G2D */ + +static unsigned long g2d_clk_regs[] __initdata = { + MUX_SEL_G2D, + MUX_STAT_G2D, + DIV_G2D, + EN_ACLK_G2D, + EN_ACLK_G2D_SECURE_SSS, + EN_ACLK_G2D_SECURE_SLIM_SSS, + EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS, + EN_ACLK_G2D_SECURE_SMMU_SSS, + EN_ACLK_G2D_SECURE_SMMU_MDMA, + EN_ACLK_G2D_SECURE_SMMU_G2D, + EN_PCLK_G2D, + EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS, + EN_PCLK_G2D_SECURE_SMMU_SSS, + EN_PCLK_G2D_SECURE_SMMU_MDMA, + EN_PCLK_G2D_SECURE_SMMU_G2D, + EN_IP_G2D, + EN_IP_G2D_SECURE_SSS, + EN_IP_G2D_SECURE_SLIM_SSS, + EN_IP_G2D_SECURE_SMMU_SLIM_SSS, + EN_IP_G2D_SECURE_SMMU_SSS, + EN_IP_G2D_SECURE_SMMU_MDMA, + EN_IP_G2D_SECURE_SMMU_G2D, +}; + +PNAME(mout_aclk_g2d_333_user_p) = {"fin_pll", "dout_aclk_g2d_333"}; + +struct samsung_mux_clock g2d_mux_clks[] __initdata = { + MUX(0, "mout_aclk_g2d_333_user", mout_aclk_g2d_333_user_p, + MUX_SEL_G2D, 0, 1), +}; + +struct samsung_div_clock g2d_div_clks[] __initdata = { + DIV(0, "dout_pclk_g2d_83", "mout_aclk_g2d_333_user", + DIV_G2D, 0, 3), +}; + +struct samsung_gate_clock g2d_gate_clks[] __initdata = { + GATE(G2D_CLK_SMMU3_JPEG, "clk_smmu3_jpeg", "mout_aclk_g2d_333_user", + EN_IP_G2D, 16, 0, 0), + GATE(G2D_CLK_MDMA, "clk_mdma", "mout_aclk_g2d_333_user", + EN_IP_G2D, 6, 0, 0), + GATE(G2D_CLK_JPEG, "clk_jpeg", "mout_aclk_g2d_333_user", + EN_IP_G2D, 5, 0, 0), + GATE(G2D_CLK_G2D, "clk_g2d", "mout_aclk_g2d_333_user", + EN_IP_G2D, 4, 0, 0), + + GATE(G2D_CLK_SSS, "clk_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SSS, 17, 0, 0), + GATE(G2D_CLK_SLIM_SSS, "clk_slim_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SLIM_SSS, 11, 0, 0), + GATE(G2D_CLK_SMMU_SLIM_SSS, "clk_smmu_slim_sss", + "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_SLIM_SSS, 13, 0, 0), + GATE(G2D_CLK_SMMU_SSS, "clk_smmu_sss", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_SSS, 14, 0, 0), + GATE(G2D_CLK_SMMU_MDMA, "clk_smmu_mdma", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_MDMA, 12, 0, 0), + GATE(G2D_CLK_SMMU3_G2D, "clk_smmu3_g2d", "mout_aclk_g2d_333_user", + EN_IP_G2D_SECURE_SMMU_G2D, 15, 0, 0), +}; + +static void __init exynos5260_clk_g2d_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = g2d_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(g2d_mux_clks); + cmu.div_clks = g2d_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(g2d_div_clks); + cmu.gate_clks = g2d_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(g2d_gate_clks); + cmu.nr_clk_ids = G2D_NR_CLK; + cmu.clk_regs = g2d_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(g2d_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_g2d, "samsung,exynos5260-clock-g2d", + exynos5260_clk_g2d_init); + + +/* CMU_G3D */ + +static unsigned long g3d_clk_regs[] __initdata = { + G3D_PLL_LOCK, + G3D_PLL_CON0, + G3D_PLL_CON1, + G3D_PLL_FDET, + MUX_SEL_G3D, + DIV_G3D, + DIV_G3D_PLL_FDET, + EN_ACLK_G3D, + EN_PCLK_G3D, + EN_SCLK_G3D, + EN_IP_G3D, +}; + +PNAME(mout_g3d_pll_p) = {"fin_pll", "fout_g3d_pll"}; + +struct samsung_mux_clock g3d_mux_clks[] __initdata = { + MUX(0, "mout_g3d_pll", mout_g3d_pll_p, MUX_SEL_G3D, 0, 1), +}; + +struct samsung_div_clock g3d_div_clks[] __initdata = { + DIV(0, "dout_pclk_g3d", "dout_aclk_g3d", DIV_G3D, 0, 3), + DIV(0, "dout_aclk_g3d", "mout_g3d_pll", DIV_G3D, 4, 3), +}; + +struct samsung_gate_clock g3d_gate_clks[] __initdata = { + GATE(G3D_CLK_G3D_HPM, "clk_g3d_hpm", "dout_aclk_g3d", + EN_IP_G3D, 3, 0, 0), + GATE(G3D_CLK_G3D, "clk_g3d", "dout_aclk_g3d", EN_IP_G3D, 2, 0, 0), +}; + +static struct samsung_pll_clock g3d_pll_clks[] __initdata = { + PLL(pll_2550, G3D_FOUT_G3D_PLL, "fout_g3d_pll", "fin_pll", + G3D_PLL_LOCK, G3D_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_g3d_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = g3d_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(g3d_pll_clks); + cmu.mux_clks = g3d_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(g3d_mux_clks); + cmu.div_clks = g3d_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(g3d_div_clks); + cmu.gate_clks = g3d_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(g3d_gate_clks); + cmu.nr_clk_ids = G3D_NR_CLK; + cmu.clk_regs = g3d_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(g3d_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_g3d, "samsung,exynos5260-clock-g3d", + exynos5260_clk_g3d_init); + + +/* CMU_GSCL */ + +static unsigned long gscl_clk_regs[] __initdata = { + MUX_SEL_GSCL, + DIV_GSCL, + EN_ACLK_GSCL, + EN_ACLK_GSCL_FIMC, + EN_ACLK_GSCL_SECURE_SMMU_GSCL0, + EN_ACLK_GSCL_SECURE_SMMU_GSCL1, + EN_ACLK_GSCL_SECURE_SMMU_MSCL0, + EN_ACLK_GSCL_SECURE_SMMU_MSCL1, + EN_PCLK_GSCL, + EN_PCLK_GSCL_FIMC, + EN_PCLK_GSCL_SECURE_SMMU_GSCL0, + EN_PCLK_GSCL_SECURE_SMMU_GSCL1, + EN_PCLK_GSCL_SECURE_SMMU_MSCL0, + EN_PCLK_GSCL_SECURE_SMMU_MSCL1, + EN_SCLK_GSCL, + EN_SCLK_GSCL_FIMC, + EN_IP_GSCL, + EN_IP_GSCL_FIMC, + EN_IP_GSCL_SECURE_SMMU_GSCL0, + EN_IP_GSCL_SECURE_SMMU_GSCL1, + EN_IP_GSCL_SECURE_SMMU_MSCL0, + EN_IP_GSCL_SECURE_SMMU_MSCL1, +}; + +PNAME(mout_aclk_gscl_333_user_p) = {"fin_pll", "fout_aud_pll"}; +PNAME(mout_aclk_m2m_400_user_p) = {"fin_pll", "dout_aclk_gscl_400"}; +PNAME(mout_aclk_gscl_fimc_user_p) = {"fin_pll", "dout_aclk_gscl_400"}; +PNAME(mout_aclk_csis_p) = {"dout_aclk_csis_200", "mout_aclk_gscl_fimc_user"}; + +struct samsung_mux_clock gscl_mux_clks[] __initdata = { + MUX(0, "mout_aclk_csis", mout_aclk_csis_p, MUX_SEL_GSCL, 24, 1), + MUX(0, "mout_aclk_gscl_fimc_user", mout_aclk_gscl_fimc_user_p, + MUX_SEL_GSCL, 8, 1), + MUX(0, "mout_aclk_m2m_400_user", mout_aclk_m2m_400_user_p, + MUX_SEL_GSCL, 4, 1), + MUX(0, "mout_aclk_gscl_333_user", mout_aclk_gscl_333_user_p, + MUX_SEL_GSCL, 0, 1), +}; + +struct samsung_div_clock gscl_div_clks[] __initdata = { + DIV(0, "dout_aclk_csis_200", "mout_aclk_m2m_400_user", + DIV_GSCL, 4, 3), + DIV(0, "dout_pclk_m2m_100", "mout_aclk_m2m_400_user", + DIV_GSCL, 0, 3), +}; + +struct samsung_gate_clock gscl_gate_clks[] __initdata = { + GATE(GSCL_CLK_PIXEL_GSCL1, "clk_pixel_gscl1", "mout_aclk_gscl_333", + EN_IP_GSCL, 9, 0, 0), + GATE(GSCL_CLK_PIXEL_GSCL0, "clk_pixel_gscl0", "mout_aclk_gscl_333", + EN_IP_GSCL, 8, 0, 0), + GATE(GSCL_CLK_MSCL1, "clk_mscl1", "mout_aclk_gscl_333", + EN_IP_GSCL, 5, 0, 0), + GATE(GSCL_CLK_MSCL0, "clk_mscl0", "mout_aclk_gscl_333", + EN_IP_GSCL, 4, 0, 0), + GATE(GSCL_CLK_GSCL1, "clk_gscl1", "mout_aclk_gscl_333", + EN_IP_GSCL, 3, 0, 0), + GATE(GSCL_CLK_GSCL0, "clk_gscl0", "mout_aclk_gscl_333", + EN_IP_GSCL, 2, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_D, "clk_fimc_lite_d", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 12, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_B, "clk_fimc_lite_b", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 11, 0, 0), + GATE(GSCL_CLK_FIMC_LITE_A, "clk_fimc_lite_a", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 10, 0, 0), + GATE(GSCL_CLK_CSIS1, "clk_csis1", "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 9, 0, 0), + GATE(GSCL_CLK_CSIS0, "clk_csis0", "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 8, 0, 0), + GATE(GSCL_CLK_SMMU3_LITE_D, "clk_smmu3_lite_d", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 7, 0, 0), + GATE(GSCL_CLK_SMMU3_LITE_B, "clk_smmu3_lite_b", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 6, 0, 0), + GATE(GSCL_CLK_SMMU3_LITE_A, "clk_smmu3_lite_a", + "mout_aclk_gscl_fimc_user", + EN_IP_GSCL_FIMC, 5, 0, 0), + GATE(GSCL_CLK_SMMU3_GSCL0, "clk_smmu3_gscl0", + "mout_aclk_gscl_333", + EN_IP_GSCL_SECURE_SMMU_GSCL0, 17, 0, 0), + GATE(GSCL_CLK_SMMU3_GSCL1, "clk_smmu3_gscl1", "mout_aclk_gscl_333", + EN_IP_GSCL_SECURE_SMMU_GSCL1, 18, 0, 0), + GATE(GSCL_CLK_SMMU3_MSCL0, "clk_smmu3_mscl0", + "mout_aclk_m2m_400_user", + EN_IP_GSCL_SECURE_SMMU_MSCL0, 19, 0, 0), + GATE(GSCL_CLK_SMMU3_MSCL1, "clk_smmu3_mscl1", + "mout_aclk_m2m_400_user", + EN_IP_GSCL_SECURE_SMMU_MSCL1, 20, 0, 0), + + GATE(GSCL_SCLK_CSIS1_WRAP, "sclk_csis1_wrap", "dout_aclk_csis_200", + EN_SCLK_GSCL_FIMC, 1, CLK_SET_RATE_PARENT, 0), + GATE(GSCL_SCLK_CSIS0_WRAP, "sclk_csis0_wrap", "dout_aclk_csis_200", + EN_SCLK_GSCL_FIMC, 0, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_gscl_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = gscl_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(gscl_mux_clks); + cmu.div_clks = gscl_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(gscl_div_clks); + cmu.gate_clks = gscl_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(gscl_gate_clks); + cmu.nr_clk_ids = GSCL_NR_CLK; + cmu.clk_regs = gscl_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(gscl_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_gscl, "samsung,exynos5260-clock-gscl", + exynos5260_clk_gscl_init); + + +/* CMU_ISP */ + +static unsigned long isp_clk_regs[] __initdata = { + MUX_SEL_ISP0, + MUX_SEL_ISP1, + DIV_ISP, + EN_ACLK_ISP0, + EN_ACLK_ISP1, + EN_PCLK_ISP0, + EN_PCLK_ISP1, + EN_SCLK_ISP, + EN_IP_ISP0, + EN_IP_ISP1, +}; + +PNAME(mout_isp_400_user_p) = {"fin_pll", "dout_aclk_isp1_400"}; +PNAME(mout_isp_266_user_p) = {"fin_pll", "dout_aclk_isp1_266"}; + +struct samsung_mux_clock isp_mux_clks[] __initdata = { + MUX(0, "mout_isp_400_user", mout_isp_400_user_p, + MUX_SEL_ISP0, 4, 1), + MUX(0, "mout_isp_266_user", mout_isp_266_user_p, + MUX_SEL_ISP0, 0, 1), +}; + +struct samsung_div_clock isp_div_clks[] __initdata = { + DIV(0, "dout_sclk_mpwm", "mout_kfc", DIV_ISP, 20, 2), + DIV(0, "dout_ca5_pclkdbg", "mout_kfc", DIV_ISP, 16, 4), + DIV(0, "dout_ca5_atclkin", "mout_kfc", DIV_ISP, 12, 3), + DIV(0, "dout_pclk_isp_133", "mout_kfc", DIV_ISP, 4, 4), + DIV(0, "dout_pclk_isp_66", "mout_kfc", DIV_ISP, 0, 3), +}; + +struct samsung_gate_clock isp_gate_clks[] __initdata = { + GATE(ISP_CLK_GIC, "clk_isp_gic", "mout_aclk_isp1_266", + EN_IP_ISP0, 15, 0, 0), + + GATE(ISP_CLK_WDT, "clk_isp_wdt", "mout_aclk_isp1_266", + EN_IP_ISP1, 31, 0, 0), + GATE(ISP_CLK_UART, "clk_isp_uart", "mout_aclk_isp1_266", + EN_IP_ISP1, 30, 0, 0), + GATE(ISP_CLK_SPI1, "clk_isp_spi1", "mout_aclk_isp1_266", + EN_IP_ISP1, 28, 0, 0), + GATE(ISP_CLK_SPI0, "clk_isp_spi0", "mout_aclk_isp1_266", + EN_IP_ISP1, 27, 0, 0), + + GATE(ISP_CLK_SMMU_SCALERP, "clk_isp_smmu_scalerp", + "mout_aclk_isp1_266", + EN_IP_ISP1, 26, 0, 0), + GATE(ISP_CLK_SMMU_SCALERC, "clk_isp_smmu_scalerc", + "mout_aclk_isp1_266", + EN_IP_ISP1, 25, 0, 0), + GATE(ISP_CLK_SMMU_ISPCX, "clk_smmu_ispcx", "mout_aclk_isp1_266", + EN_IP_ISP1, 24, 0, 0), + GATE(ISP_CLK_SMMU_ISP, "clk_smmu_isp", "mout_aclk_isp1_266", + EN_IP_ISP1, 23, 0, 0), + GATE(ISP_CLK_SMMU_FD, "clk_smmu_fd", "mout_aclk_isp1_266", + EN_IP_ISP1, 22, 0, 0), + GATE(ISP_CLK_SMMU_DRC, "clk_smmu_drc", "mout_aclk_isp1_266", + EN_IP_ISP1, 21, 0, 0), + GATE(ISP_CLK_PWM, "clk_isp_pwm", "mout_aclk_isp1_266", + EN_IP_ISP1, 14, 0, 0), + GATE(ISP_CLK_MTCADC, "clk_isp_mtcadc", "mout_aclk_isp1_266", + EN_IP_ISP1, 11, 0, 0), + GATE(ISP_CLK_MPWM, "clk_isp_mpwm", "mout_aclk_isp1_266", + EN_IP_ISP1, 10, 0, 0), + GATE(ISP_CLK_MCUCTL, "clk_isp_mcuctl", "mout_aclk_isp1_266", + EN_IP_ISP1, 9, 0, 0), + GATE(ISP_CLK_I2C1, "clk_isp_i2c1", "mout_aclk_isp1_266", + EN_IP_ISP1, 8, 0, 0), + GATE(ISP_CLK_I2C0, "clk_isp_i2c0", "mout_aclk_isp1_266", + EN_IP_ISP1, 7, 0, 0), + GATE(ISP_CLK_FIMC_SCALERP, "clk_isp_fimc_scalerp", + "mout_aclk_isp1_266", + EN_IP_ISP1, 6, 0, 0), + GATE(ISP_CLK_FIMC_SCALERC, "clk_isp_fimc_scalerc", + "mout_aclk_isp1_266", + EN_IP_ISP1, 5, 0, 0), + GATE(ISP_CLK_FIMC, "clk_isp_fimc", "mout_aclk_isp1_266", + EN_IP_ISP1, 4, 0, 0), + GATE(ISP_CLK_FIMC_FD, "clk_isp_fimc_fd", "mout_aclk_isp1_266", + EN_IP_ISP1, 3, 0, 0), + GATE(ISP_CLK_FIMC_DRC, "clk_isp_fimc_drc", "mout_aclk_isp1_266", + EN_IP_ISP1, 2, 0, 0), + GATE(ISP_CLK_CA5, "clk_isp_ca5", "mout_aclk_isp1_266", + EN_IP_ISP1, 1, 0, 0), + + GATE(ISP_SCLK_SPI0_EXT, "sclk_isp_spi0_ext", "fin_pll", + EN_SCLK_ISP, 9, CLK_SET_RATE_PARENT, 0), + GATE(ISP_SCLK_SPI1_EXT, "sclk_isp_spi1_ext", "fin_pll", + EN_SCLK_ISP, 8, CLK_SET_RATE_PARENT, 0), + GATE(ISP_SCLK_UART_EXT, "sclk_isp_uart_ext", "fin_pll", + EN_SCLK_ISP, 7, CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_isp_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = isp_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(isp_mux_clks); + cmu.div_clks = isp_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(isp_div_clks); + cmu.gate_clks = isp_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(isp_gate_clks); + cmu.nr_clk_ids = ISP_NR_CLK; + cmu.clk_regs = isp_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(isp_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_isp, "samsung,exynos5260-clock-isp", + exynos5260_clk_isp_init); + + +/* CMU_KFC */ + +static unsigned long kfc_clk_regs[] __initdata = { + KFC_PLL_LOCK, + KFC_PLL_CON0, + KFC_PLL_CON1, + KFC_PLL_FDET, + MUX_SEL_KFC0, + MUX_SEL_KFC2, + DIV_KFC, + DIV_KFC_PLL_FDET, + EN_ACLK_KFC, + EN_PCLK_KFC, + EN_SCLK_KFC, + EN_IP_KFC, +}; + +PNAME(mout_kfc_pll_p) = {"fin_pll", "fout_kfc_pll"}; +PNAME(mout_kfc_p) = {"mout_kfc_pll", "dout_media_pll"}; + +struct samsung_mux_clock kfc_mux_clks[] __initdata = { + MUX(0, "mout_kfc_pll", mout_kfc_pll_p, MUX_SEL_KFC0, 0, 1), + MUX(0, "mout_kfc", mout_kfc_p, MUX_SEL_KFC2, 0, 1), +}; + +struct samsung_div_clock kfc_div_clks[] __initdata = { + DIV(0, "dout_kfc_pll", "mout_kfc", DIV_KFC, 24, 3), + DIV(0, "dout_pclk_kfc", "dout_kfc2", DIV_KFC, 20, 3), + DIV(0, "dout_aclk_kfc", "dout_kfc2", DIV_KFC, 16, 3), + DIV(0, "dout_kfc_pclk_dbg", "dout_kfc2", DIV_KFC, 12, 3), + DIV(0, "dout_kfc_atclk", "dout_kfc2", DIV_KFC, 8, 3), + DIV(0, "dout_kfc2", "dout_kfc1", DIV_KFC, 4, 3), + DIV(0, "dout_kfc1", "mout_kfc", DIV_KFC, 0, 3), +}; + +static struct samsung_pll_clock kfc_pll_clks[] __initdata = { + PLL(pll_2550xx, KFC_FOUT_KFC_PLL, "fout_kfc_pll", "fin_pll", + KFC_PLL_LOCK, KFC_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_kfc_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = kfc_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(kfc_pll_clks); + cmu.mux_clks = kfc_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(kfc_mux_clks); + cmu.div_clks = kfc_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(kfc_div_clks); + cmu.nr_clk_ids = KFC_NR_CLK; + cmu.clk_regs = kfc_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(kfc_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_kfc, "samsung,exynos5260-clock-kfc", + exynos5260_clk_kfc_init); + + +/* CMU_MFC */ + +static unsigned long mfc_clk_regs[] __initdata = { + MUX_SEL_MFC, + DIV_MFC, + EN_ACLK_MFC, + EN_ACLK_SECURE_SMMU2_MFC, + EN_PCLK_MFC, + EN_PCLK_SECURE_SMMU2_MFC, + EN_IP_MFC, + EN_IP_MFC_SECURE_SMMU2_MFC, +}; + +PNAME(mout_aclk_mfc_333_user_p) = {"fin_pll", "dout_aclk_mfc_333"}; + +struct samsung_mux_clock mfc_mux_clks[] __initdata = { + MUX(0, "mout_aclk_mfc_333_user", mout_aclk_mfc_333_user_p, + MUX_SEL_MFC, 0, 1), +}; + +struct samsung_div_clock mfc_div_clks[] __initdata = { + DIV(0, "dout_pclk_mfc_83", "mout_aclk_mfc_333_user", + DIV_MFC, 0, 3), +}; + +struct samsung_gate_clock mfc_gate_clks[] __initdata = { + GATE(MFC_CLK_MFC, "clk_mfc", "mout_aclk_mfc_333_user", + EN_IP_MFC, 1, 0, 0), + + GATE(MFC_CLK_SMMU2_MFCM1, "clk_smmu2_mfcm1", "mout_aclk_mfc_333_user", + EN_IP_MFC_SECURE_SMMU2_MFC, 7, 0, 0), + GATE(MFC_CLK_SMMU2_MFCM0, "clk_smmu2_mfcm0", "mout_aclk_mfc_333_user", + EN_IP_MFC_SECURE_SMMU2_MFC, 6, 0, 0), +}; + +static void __init exynos5260_clk_mfc_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = mfc_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(mfc_mux_clks); + cmu.div_clks = mfc_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(mfc_div_clks); + cmu.gate_clks = mfc_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(mfc_gate_clks); + cmu.nr_clk_ids = MFC_NR_CLK; + cmu.clk_regs = mfc_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(mfc_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_mfc, "samsung,exynos5260-clock-mfc", + exynos5260_clk_mfc_init); + + +/* CMU_MIF */ + +static unsigned long mif_clk_regs[] __initdata = { + MEM_PLL_LOCK, + BUS_PLL_LOCK, + MEDIA_PLL_LOCK, + MEM_PLL_CON0, + MEM_PLL_CON1, + MEM_PLL_FDET, + BUS_PLL_CON0, + BUS_PLL_CON1, + BUS_PLL_FDET, + MEDIA_PLL_CON0, + MEDIA_PLL_CON1, + MEDIA_PLL_FDET, + MUX_SEL_MIF, + DIV_MIF, + DIV_MIF_PLL_FDET, + EN_ACLK_MIF, + EN_ACLK_MIF_SECURE_DREX1_TZ, + EN_ACLK_MIF_SECURE_DREX0_TZ, + EN_ACLK_MIF_SECURE_INTMEM, + EN_PCLK_MIF, + EN_PCLK_MIF_SECURE_MONOCNT, + EN_PCLK_MIF_SECURE_RTC_APBIF, + EN_PCLK_MIF_SECURE_DREX1_TZ, + EN_PCLK_MIF_SECURE_DREX0_TZ, + EN_SCLK_MIF, + EN_IP_MIF, + EN_IP_MIF_SECURE_MONOCNT, + EN_IP_MIF_SECURE_RTC_APBIF, + EN_IP_MIF_SECURE_DREX1_TZ, + EN_IP_MIF_SECURE_DREX0_TZ, + EN_IP_MIF_SECURE_INTEMEM, +}; + +PNAME(mout_mem_pll_p) = {"fin_pll", "fout_mem_pll"}; +PNAME(mout_bus_pll_p) = {"fin_pll", "fout_bus_pll"}; +PNAME(mout_media_pll_p) = {"fin_pll", "fout_media_pll"}; +PNAME(mout_mif_drex_p) = {"dout_mem_pll", "dout_bus_pll"}; +PNAME(mout_mif_drex2x_p) = {"dout_mem_pll", "dout_bus_pll"}; +PNAME(mout_clkm_phy_p) = {"mout_mif_drex", "dout_media_pll"}; +PNAME(mout_clk2x_phy_p) = {"mout_mif_drex2x", "dout_media_pll"}; + +struct samsung_mux_clock mif_mux_clks[] __initdata = { + MUX(0, "mout_clk2x_phy", mout_clk2x_phy_p, MUX_SEL_MIF, 24, 1), + MUX(0, "mout_mif_drex2x", mout_mif_drex2x_p, MUX_SEL_MIF, 20, 1), + MUX(0, "mout_clkm_phy", mout_clkm_phy_p, MUX_SEL_MIF, 16, 1), + MUX(0, "mout_mif_drex", mout_mif_drex_p, MUX_SEL_MIF, 12, 1), + MUX(0, "mout_media_pll", mout_media_pll_p, MUX_SEL_MIF, 8, 1), + MUX(0, "mout_bus_pll", mout_bus_pll_p, MUX_SEL_MIF, 4, 1), + MUX(0, "mout_mem_pll", mout_mem_pll_p, MUX_SEL_MIF, 0, 1), +}; + +struct samsung_div_clock mif_div_clks[] __initdata = { + DIV(0, "dout_aclk_bus_100", "dout_bus_pll", DIV_MIF, 28, 4), + DIV(0, "dout_aclk_bus_200", "dout_bus_pll", DIV_MIF, 24, 3), + DIV(0, "dout_aclk_mif_466", "dout_clk2x_phy", DIV_MIF, 20, 3), + DIV(0, "dout_clk2x_phy", "mout_clk2x_phy", DIV_MIF, 16, 4), + DIV(0, "dout_clkm_phy", "mout_clkm_phy", DIV_MIF, 12, 3), + DIV(0, "dout_bus_pll", "mout_bus_pll", DIV_MIF, 8, 3), + DIV(0, "dout_mem_pll", "mout_mem_pll", DIV_MIF, 4, 3), + DIV(0, "dout_media_pll", "mout_media_pll", DIV_MIF, 0, 3), +}; + +struct samsung_gate_clock mif_gate_clks[] __initdata = { + GATE(0, "clk_lpddr3phy_wrap1", "dout_clk2x_phy", + EN_IP_MIF, 13, CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_lpddr3phy_wrap0", "dout_clk2x_phy", + EN_IP_MIF, 12, CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_monocnt", "dout_aclk_bus_100", + EN_IP_MIF_SECURE_MONOCNT, 22, + CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_mif_rtc", "dout_aclk_bus_100", + EN_IP_MIF_SECURE_RTC_APBIF, 23, + CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_drex1", "dout_aclk_mif_466", + EN_IP_MIF_SECURE_DREX1_TZ, 9, + CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_drex0", "dout_aclk_mif_466", + EN_IP_MIF_SECURE_DREX0_TZ, 9, + CLK_IGNORE_UNUSED, 0), + GATE(0, "clk_intmem", "dout_aclk_bus_200", + EN_IP_MIF_SECURE_INTEMEM, 11, + CLK_IGNORE_UNUSED, 0), + + GATE(0, "sclk_lpddr3phy_wrap_u1", "dout_clkm_phy", + EN_SCLK_MIF, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), + GATE(0, "sclk_lpddr3phy_wrap_u0", "dout_clkm_phy", + EN_SCLK_MIF, 0, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), +}; + +static struct samsung_pll_clock mif_pll_clks[] __initdata = { + PLL(pll_2550xx, MIF_FOUT_MEM_PLL, "fout_mem_pll", "fin_pll", + MEM_PLL_LOCK, MEM_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2550xx, MIF_FOUT_BUS_PLL, "fout_bus_pll", "fin_pll", + BUS_PLL_LOCK, BUS_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2550xx, MIF_FOUT_MEDIA_PLL, "fout_media_pll", "fin_pll", + MEDIA_PLL_LOCK, MEDIA_PLL_CON0, + pll2550_24mhz_tbl), +}; + +static void __init exynos5260_clk_mif_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = mif_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(mif_pll_clks); + cmu.mux_clks = mif_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(mif_mux_clks); + cmu.div_clks = mif_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(mif_div_clks); + cmu.gate_clks = mif_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(mif_gate_clks); + cmu.nr_clk_ids = MIF_NR_CLK; + cmu.clk_regs = mif_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(mif_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_mif, "samsung,exynos5260-clock-mif", + exynos5260_clk_mif_init); + + +/* CMU_PERI */ + +static unsigned long peri_clk_regs[] __initdata = { + MUX_SEL_PERI, + MUX_SEL_PERI1, + DIV_PERI, + EN_PCLK_PERI0, + EN_PCLK_PERI1, + EN_PCLK_PERI2, + EN_PCLK_PERI3, + EN_PCLK_PERI_SECURE_CHIPID, + EN_PCLK_PERI_SECURE_PROVKEY0, + EN_PCLK_PERI_SECURE_PROVKEY1, + EN_PCLK_PERI_SECURE_SECKEY, + EN_PCLK_PERI_SECURE_ANTIRBKCNT, + EN_PCLK_PERI_SECURE_TOP_RTC, + EN_PCLK_PERI_SECURE_TZPC, + EN_SCLK_PERI, + EN_SCLK_PERI_SECURE_TOP_RTC, + EN_IP_PERI0, + EN_IP_PERI1, + EN_IP_PERI2, + EN_IP_PERI_SECURE_CHIPID, + EN_IP_PERI_SECURE_PROVKEY0, + EN_IP_PERI_SECURE_PROVKEY1, + EN_IP_PERI_SECURE_SECKEY, + EN_IP_PERI_SECURE_ANTIRBKCNT, + EN_IP_PERI_SECURE_TOP_RTC, + EN_IP_PERI_SECURE_TZPC, +}; + +PNAME(mout_sclk_pcm_p) = {"ioclk_pcm_extclk", "fin_pll", "dout_aclk_peri_aud", + "phyclk_hdmi_phy_ref_cko"}; +PNAME(mout_sclk_i2scod_p) = {"ioclk_i2s_cdclk", "fin_pll", "dout_aclk_peri_aud", + "phyclk_hdmi_phy_ref_cko"}; +PNAME(mout_sclk_spdif_p) = {"ioclk_spdif_extclk", "fin_pll", + "dout_aclk_peri_aud", "phyclk_hdmi_phy_ref_cko"}; + +struct samsung_mux_clock peri_mux_clks[] __initdata = { + MUX(0, "mout_sclk_spdif", mout_sclk_spdif_p, + MUX_SEL_PERI1, 20, 2), + MUX(0, "mout_sclk_i2scod", mout_sclk_i2scod_p, + MUX_SEL_PERI1, 12, 2), + MUX(0, "mout_sclk_pcm", mout_sclk_pcm_p, + MUX_SEL_PERI1, 4, 2), +}; + +struct samsung_div_clock peri_div_clks[] __initdata = { + DIV(0, "dout_i2s", "mout_sclk_i2scod", DIV_PERI, 0, 6), + DIV(0, "dout_pcm", "mout_sclk_pcm", DIV_PERI, 0, 8), +}; + +struct samsung_gate_clock peri_gate_clks[] __initdata = { + GATE(PERI_CLK_WDT_KFC, "clk_wdt_kfc", "dout_aclk_peri_66", + EN_IP_PERI0, 25, 0, 0), + GATE(PERI_CLK_WDT_EGL, "clk_wdt_egl", "dout_aclk_peri_66", + EN_IP_PERI0, 24, 0, 0), + GATE(PERI_CLK_HSIC3, "clk_hsic3", "dout_aclk_peri_66", + EN_IP_PERI0, 23, 0, 0), + GATE(PERI_CLK_HSIC2, "clk_hsic2", "dout_aclk_peri_66", + EN_IP_PERI0, 22, 0, 0), + GATE(PERI_CLK_HSIC1, "clk_hsic1", "dout_aclk_peri_66", + EN_IP_PERI0, 21, 0, 0), + GATE(PERI_CLK_HSIC0, "clk_hsic0", "dout_aclk_peri_66", + EN_IP_PERI0, 20, 0, 0), + GATE(PERI_CLK_PCM, "clk_peri_pcm", "dout_aclk_peri_66", + EN_IP_PERI0, 18, 0, 0), + GATE(PERI_CLK_MCT, "clk_mct", "dout_aclk_peri_66", + EN_IP_PERI0, 17, 0, 0), + GATE(PERI_CLK_I2S, "clk_peri_i2s", "dout_aclk_peri_66", + EN_IP_PERI0, 16, 0, 0), + GATE(PERI_CLK_I2CHDMI, "clk_i2chdmi", "dout_aclk_peri_66", + EN_IP_PERI0, 15, 0, 0), + GATE(PERI_CLK_I2C7, "clk_i2c7", "dout_aclk_peri_66", + EN_IP_PERI0, 14, 0, 0), + GATE(PERI_CLK_I2C6, "clk_i2c6", "dout_aclk_peri_66", + EN_IP_PERI0, 13, 0, 0), + GATE(PERI_CLK_I2C5, "clk_i2c5", "dout_aclk_peri_66", + EN_IP_PERI0, 12, 0, 0), + GATE(PERI_CLK_I2C4, "clk_i2c4", "dout_aclk_peri_66", + EN_IP_PERI0, 11, 0, 0), + GATE(PERI_CLK_I2C9, "clk_i2c9", "dout_aclk_peri_66", + EN_IP_PERI0, 10, 0, 0), + GATE(PERI_CLK_I2C8, "clk_i2c8", "dout_aclk_peri_66", + EN_IP_PERI0, 9, 0, 0), + GATE(PERI_CLK_I2C11, "clk_i2c11", "dout_aclk_peri_66", + EN_IP_PERI0, 8, 0, 0), + GATE(PERI_CLK_I2C10, "clk_i2c10", "dout_aclk_peri_66", + EN_IP_PERI0, 7, 0, 0), + GATE(PERI_CLK_HDMICEC, "clk_hdmicec", "dout_aclk_peri_66", + EN_IP_PERI0, 6, 0, 0), + GATE(PERI_CLK_EFUSE_WRITER, "clk_efuse_writer", "dout_aclk_peri_66", + EN_IP_PERI0, 5, 0, 0), + GATE(PERI_CLK_ABB, "clk_abb", "dout_aclk_peri_66", + EN_IP_PERI0, 1, 0, 0), + + GATE(PERI_CLK_UART2, "clk_uart2", "dout_aclk_peri_66", + EN_IP_PERI2, 21, 0, 0), + GATE(PERI_CLK_UART1, "clk_uart1", "dout_aclk_peri_66", + EN_IP_PERI2, 20, 0, 0), + GATE(PERI_CLK_UART0, "clk_uart0", "dout_aclk_peri_66", + EN_IP_PERI2, 19, 0, 0), + GATE(PERI_CLK_ADC, "clk_adc", "dout_aclk_peri_66", + EN_IP_PERI2, 18, 0, 0), + GATE(PERI_CLK_TMU4, "clk_tmu4", "dout_aclk_peri_66", + EN_IP_PERI2, 14, 0, 0), + GATE(PERI_CLK_TMU3, "clk_tmu3", "dout_aclk_peri_66", + EN_IP_PERI2, 13, 0, 0), + GATE(PERI_CLK_TMU2, "clk_tmu2", "dout_aclk_peri_66", + EN_IP_PERI2, 12, 0, 0), + GATE(PERI_CLK_TMU1, "clk_tmu1", "dout_aclk_peri_66", + EN_IP_PERI2, 11, 0, 0), + GATE(PERI_CLK_TMU0, "clk_tmu0", "dout_aclk_peri_66", + EN_IP_PERI2, 10, 0, 0), + GATE(PERI_CLK_SPI2, "clk_spi2", "dout_aclk_peri_66", + EN_IP_PERI2, 9, 0, 0), + GATE(PERI_CLK_SPI1, "clk_spi1", "dout_aclk_peri_66", + EN_IP_PERI2, 8, 0, 0), + GATE(PERI_CLK_SPI0, "clk_spi0", "dout_aclk_peri_66", + EN_IP_PERI2, 7, 0, 0), + GATE(PERI_CLK_SPDIF, "clk_spdif", "dout_aclk_peri_66", + EN_IP_PERI2, 6, 0, 0), + GATE(PERI_CLK_PWM, "clk_pwm", "dout_aclk_peri_66", + EN_IP_PERI2, 3, 0, 0), + GATE(PERI_CLK_UART4, "clk_uart4", "dout_aclk_peri_66", + EN_IP_PERI2, 0, 0, 0), + + GATE(PERI_CLK_CHIPID, "clk_chipid", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_CHIPID, 2, 0, 0), + GATE(PERI_CLK_PROVKEY0, "clk_provkey0", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_PROVKEY0, 1, 0, 0), + GATE(PERI_CLK_PROVKEY1, "clk_provkey1", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_PROVKEY1, 2, 0, 0), + GATE(PERI_CLK_SECKEY, "clk_seckey", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_SECKEY, 5, 0, 0), + GATE(PERI_CLK_TOP_RTC, "clk_top_rtc", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TOP_RTC, 5, 0, 0), + + GATE(PERI_CLK_TZPC10, "clk_tzpc10", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 20, 0, 0), + GATE(PERI_CLK_TZPC9, "clk_tzpc9", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 19, 0, 0), + GATE(PERI_CLK_TZPC8, "clk_tzpc8", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 18, 0, 0), + GATE(PERI_CLK_TZPC7, "clk_tzpc7", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 17, 0, 0), + GATE(PERI_CLK_TZPC6, "clk_tzpc6", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 16, 0, 0), + GATE(PERI_CLK_TZPC5, "clk_tzpc5", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 15, 0, 0), + GATE(PERI_CLK_TZPC4, "clk_tzpc4", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 14, 0, 0), + GATE(PERI_CLK_TZPC3, "clk_tzpc3", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 13, 0, 0), + GATE(PERI_CLK_TZPC2, "clk_tzpc2", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 12, 0, 0), + GATE(PERI_CLK_TZPC1, "clk_tzpc1", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 11, 0, 0), + GATE(PERI_CLK_TZPC0, "clk_tzpc0", "dout_aclk_peri_66", + EN_IP_PERI_SECURE_TZPC, 10, 0, 0), + + GATE(PERI_SCLK_UART2, "sclk_uart2", "dout_sclk_peri_uart2", + EN_SCLK_PERI, 12, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_UART1, "sclk_uart1", "dout_sclk_peri_uart1", + EN_SCLK_PERI, 11, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_UART0, "sclk_uart0", "dout_sclk_peri_uart0", + EN_SCLK_PERI, 10, CLK_IGNORE_UNUSED | + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI2, "sclk_spi2", "dout_sclk_peri_spi2_b", + EN_SCLK_PERI, 9, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI1, "sclk_spi1", "dout_sclk_peri_spi1_b", + EN_SCLK_PERI, 8, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPI0, "sclk_spi0", "dout_sclk_peri_spi0_b", + EN_SCLK_PERI, 7, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_SPDIF, "sclk_spdif", "dout_sclk_peri_spi0_b", + EN_SCLK_PERI, 2, CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_I2S, "sclk_i2s", "dout_i2s", EN_SCLK_PERI, 1, + CLK_SET_RATE_PARENT, 0), + GATE(PERI_SCLK_PCM1, "sclk_pcm1", "dout_pcm", EN_SCLK_PERI, 0, + CLK_SET_RATE_PARENT, 0), +}; + +static void __init exynos5260_clk_peri_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.mux_clks = peri_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(peri_mux_clks); + cmu.div_clks = peri_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(peri_div_clks); + cmu.gate_clks = peri_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(peri_gate_clks); + cmu.nr_clk_ids = PERI_NR_CLK; + cmu.clk_regs = peri_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(peri_clk_regs); + + exynos5260_cmu_register_one(np, &cmu); +} + +CLK_OF_DECLARE(exynos5260_clk_peri, "samsung,exynos5260-clock-peri", + exynos5260_clk_peri_init); + + +/* CMU_TOP */ + +static unsigned long top_clk_regs[] __initdata = { + DISP_PLL_LOCK, + AUD_PLL_LOCK, + DISP_PLL_CON0, + DISP_PLL_CON1, + DISP_PLL_FDET, + AUD_PLL_CON0, + AUD_PLL_CON1, + AUD_PLL_CON2, + AUD_PLL_FDET, + MUX_SEL_TOP_PLL0, + MUX_SEL_TOP_MFC, + MUX_SEL_TOP_G2D, + MUX_SEL_TOP_GSCL, + MUX_SEL_TOP_ISP10, + MUX_SEL_TOP_ISP11, + MUX_SEL_TOP_DISP0, + MUX_SEL_TOP_DISP1, + MUX_SEL_TOP_BUS, + MUX_SEL_TOP_PERI0, + MUX_SEL_TOP_PERI1, + MUX_SEL_TOP_FSYS, + DIV_TOP_G2D_MFC, + DIV_TOP_GSCL_ISP0, + DIV_TOP_ISP10, + DIV_TOP_ISP11, + DIV_TOP_DISP, + DIV_TOP_BUS, + DIV_TOP_PERI0, + DIV_TOP_PERI1, + DIV_TOP_PERI2, + DIV_TOP_FSYS0, + DIV_TOP_FSYS1, + DIV_TOP_HPM, + DIV_TOP_PLL_FDET, + EN_ACLK_TOP, + EN_SCLK_TOP, + EN_IP_TOP, +}; + +PNAME(mout_memtop_pll_user_p) = {"fin_pll", "dout_mem_pll"}; +PNAME(mout_bustop_pll_user_p) = {"fin_pll", "dout_bus_pll"}; +PNAME(mout_mediatop_pll_user_p) = {"fin_pll", "dout_media_pll"}; +PNAME(mout_audtop_pll_user_p) = {"fin_pll", "mout_aud_pll"}; +PNAME(mout_aud_pll_p) = {"fin_pll", "fout_aud_pll"}; +PNAME(mout_disp_pll_p) = {"fin_pll", "fout_disp_pll"}; + +PNAME(mout_mfc_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_mfc_333_p) = {"mout_mediatop_pll_user", "mout_mfc_bustop_333"}; + +PNAME(mout_g2d_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_g2d_333_p) = {"mout_mediatop_pll_user", "mout_g2d_bustop_333"}; + +PNAME(mout_gscl_bustop_333_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_333_p) = {"mout_mediatop_pll_user", + "mout_gscl_bustop_333"}; +PNAME(mout_m2m_mediatop_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_400_p) = {"mout_bustop_pll_user", + "mout_m2m_mediatop_400"}; +PNAME(mout_gscl_bustop_fimc_p) = {"mout_bustop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_gscl_fimc_p) = {"mout_mediatop_pll_user", + "mout_gscl_bustop_fimc"}; + +PNAME(mout_isp1_media_266_p) = {"mout_mediatop_pll_user", + "mout_memtop_pll_user"}; +PNAME(mout_aclk_isp1_266_p) = {"mout_bustop_pll_user", "mout_isp1_media_266"}; +PNAME(mout_isp1_media_400_p) = {"mout_mediatop_pll_user", "mout_disp_pll"}; +PNAME(mout_aclk_isp1_400_p) = {"mout_bustop_pll_user", "mout_isp1_media_400"}; + +PNAME(mout_sclk_isp_spi_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_isp_uart_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_isp_sensor_p) = {"fin_pll", "mout_bustop_pll_user"}; + +PNAME(mout_disp_disp_333_p) = {"mout_disp_pll", "mout_bustop_pll_user"}; +PNAME(mout_aclk_disp_333_p) = {"mout_mediatop_pll_user", "mout_disp_disp_333"}; +PNAME(mout_disp_disp_222_p) = {"mout_disp_pll", "mout_bustop_pll_user"}; +PNAME(mout_aclk_disp_222_p) = {"mout_mediatop_pll_user", "mout_disp_disp_222"}; +PNAME(mout_disp_media_pixel_p) = {"mout_mediatop_pll_user", + "mout_bustop_pll_user"}; +PNAME(mout_sclk_disp_pixel_p) = {"mout_disp_pll", "mout_disp_media_pixel"}; + +PNAME(mout_bus_bustop_400_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"}; +PNAME(mout_bus_bustop_100_p) = {"mout_bustop_pll_user", "mout_memtop_pll_user"}; + +PNAME(mout_sclk_peri_spi_clk_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_peri_uart_uclk_p) = {"fin_pll", "mout_bustop_pll_user"}; + +PNAME(mout_sclk_fsys_usb_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_fsys_mmc_sdclkin_a_p) = {"fin_pll", "mout_bustop_pll_user"}; +PNAME(mout_sclk_fsys_mmc0_sdclkin_b_p) = {"mout_sclk_fsys_mmc0_sdclkin_a", + "mout_mediatop_pll_user"}; +PNAME(mout_sclk_fsys_mmc1_sdclkin_b_p) = {"mout_sclk_fsys_mmc1_sdclkin_a", + "mout_mediatop_pll_user"}; +PNAME(mout_sclk_fsys_mmc2_sdclkin_b_p) = {"mout_sclk_fsys_mmc2_sdclkin_a", + "mout_mediatop_pll_user"}; + +struct samsung_fixed_rate_clock fixed_rate_ext_clks[] __initdata = { + FRATE(FIN_PLL, "fin_pll", NULL, CLK_IS_ROOT, 0), + FRATE(0, "xrtcxti", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ioclk_pcm_extclk", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ioclk_spdif_extclk", NULL, CLK_IS_ROOT, 0), + FRATE(0, "ioclk_i2s_cdclk", NULL, CLK_IS_ROOT, 0), +}; + +struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = { + FRATE(0, "phyclk_dptx_phy_ch3_txd_clk", NULL, + CLK_IS_ROOT, 270000000), + FRATE(0, "phyclk_dptx_phy_ch2_txd_clk", NULL, + CLK_IS_ROOT, 270000000), + FRATE(0, "phyclk_dptx_phy_ch1_txd_clk", NULL, + CLK_IS_ROOT, 270000000), + FRATE(0, "phyclk_dptx_phy_ch0_txd_clk", NULL, + CLK_IS_ROOT, 270000000), + FRATE(0, "phyclk_hdmi_phy_tmds_clko", NULL, + CLK_IS_ROOT, 250000000), + FRATE(TOP_HDMI_PHY_PIXEL_CLKO, "phyclk_hdmi_phy_pixel_clko", NULL, + CLK_IS_ROOT, 1660000000), + FRATE(0, "phyclk_hdmi_link_o_tmds_clkhi", NULL, + CLK_IS_ROOT, 125000000), + FRATE(0, "phyclk_mipi_dphy_4l_m_txbyteclkhs", NULL, + CLK_IS_ROOT, 187500000), + FRATE(0, "phyclk_dptx_phy_o_ref_clk_24m", NULL, + CLK_IS_ROOT, 24000000), + FRATE(0, "phyclk_dptx_phy_clk_div2", NULL, + CLK_IS_ROOT, 135000000), + FRATE(0, "phyclk_mipi_dphy_4l_m_rxclkesc0", NULL, + CLK_IS_ROOT, 20000000), + FRATE(0, "phyclk_usbhost20_phy_phyclock", NULL, + CLK_IS_ROOT, 60000000), + FRATE(0, "phyclk_usbhost20_phy_freeclk", NULL, + CLK_IS_ROOT, 60000000), + FRATE(0, "phyclk_usbhost20_phy_clk48mohci", NULL, + CLK_IS_ROOT, 48000000), + FRATE(0, "phyclk_usbdrd30_udrd30_pipe_pclk", NULL, + CLK_IS_ROOT, 125000000), + FRATE(0, "phyclk_usbdrd30_udrd30_phyclock", NULL, + CLK_IS_ROOT, 60000000), +}; + +struct samsung_mux_clock top_mux_clks[] __initdata = { + MUX(0, "mout_audtop_pll_user", mout_audtop_pll_user_p, + MUX_SEL_TOP_PLL0, 24, 1), + MUX(0, "mout_aud_pll", mout_aud_pll_p, MUX_SEL_TOP_PLL0, 16, 1), + MUX(TOP_MOUT_DISP_PLL, "mout_disp_pll", mout_disp_pll_p, + MUX_SEL_TOP_PLL0, 12, 1), + MUX(0, "mout_bustop_pll_user", mout_bustop_pll_user_p, + MUX_SEL_TOP_PLL0, 8, 1), + MUX(0, "mout_memtop_pll_user", mout_memtop_pll_user_p, + MUX_SEL_TOP_PLL0, 4, 1), + MUX(0, "mout_mediatop_pll_user", mout_mediatop_pll_user_p, + MUX_SEL_TOP_PLL0, 0, 1), + + + MUX(0, "mout_disp_disp_333", mout_disp_disp_333_p, + MUX_SEL_TOP_DISP0, 0, 1), + MUX(0, "mout_aclk_disp_333", mout_aclk_disp_333_p, + MUX_SEL_TOP_DISP0, 8, 1), + MUX(0, "mout_disp_disp_222", mout_disp_disp_222_p, + MUX_SEL_TOP_DISP0, 12, 1), + MUX(0, "mout_aclk_disp_222", mout_aclk_disp_222_p, + MUX_SEL_TOP_DISP0, 20, 1), + MUX(0, "mout_disp_media_pixel", mout_disp_media_pixel_p, + MUX_SEL_TOP_DISP1, 8, 1), + MUX(TOP_MOUT_FIMD1, "mout_sclk_disp_pixel", mout_sclk_disp_pixel_p, + MUX_SEL_TOP_DISP1, 0, 1), + + MUX(0, "mout_sclk_peri_spi0_clk", mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 8, 1), + MUX(0, "mout_sclk_peri_spi1_clk", mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 4, 1), + MUX(0, "mout_sclk_peri_spi2_clk", mout_sclk_peri_spi_clk_p, + MUX_SEL_TOP_PERI1, 0, 1), + MUX(0, "mout_sclk_peri_uart0_uclk", mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 20, 1), + MUX(0, "mout_sclk_peri_uart2_uclk", mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 16, 1), + MUX(0, "mout_sclk_peri_uart1_uclk", mout_sclk_peri_uart_uclk_p, + MUX_SEL_TOP_PERI1, 12, 1), + + MUX(0, "mout_bus4_bustop_100", mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 28, 1), + MUX(0, "mout_bus4_bustop_400", mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 24, 1), + MUX(0, "mout_bus3_bustop_100", mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 20, 1), + MUX(0, "mout_bus3_bustop_400", mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 16, 1), + MUX(0, "mout_bus2_bustop_400", mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 12, 1), + MUX(0, "mout_bus2_bustop_100", mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 8, 1), + MUX(0, "mout_bus1_bustop_100", mout_bus_bustop_100_p, + MUX_SEL_TOP_BUS, 4, 1), + MUX(0, "mout_bus1_bustop_400", mout_bus_bustop_400_p, + MUX_SEL_TOP_BUS, 0, 1), + + MUX(0, "mout_sclk_fsys_usb", mout_sclk_fsys_usb_p, + MUX_SEL_TOP_FSYS, 0, 1), + MUX(0, "mout_sclk_fsys_mmc0_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 20, 1), + MUX(0, "mout_sclk_fsys_mmc1_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 12, 1), + MUX(0, "mout_sclk_fsys_mmc2_sdclkin_a", + mout_sclk_fsys_mmc_sdclkin_a_p, + MUX_SEL_TOP_FSYS, 4, 1), + MUX(0, "mout_sclk_fsys_mmc0_sdclkin_b", + mout_sclk_fsys_mmc0_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 24, 1), + MUX(0, "mout_sclk_fsys_mmc1_sdclkin_b", + mout_sclk_fsys_mmc1_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 16, 1), + MUX(0, "mout_sclk_fsys_mmc2_sdclkin_b", + mout_sclk_fsys_mmc2_sdclkin_b_p, + MUX_SEL_TOP_FSYS, 8, 1), + + MUX(0, "mout_aclk_isp1_266", mout_aclk_isp1_266_p, + MUX_SEL_TOP_ISP10, 20, 1), + MUX(0, "mout_isp1_media_266", mout_isp1_media_266_p, + MUX_SEL_TOP_ISP10, 16, 1), + MUX(0, "mout_aclk_isp1_400", mout_aclk_isp1_400_p, + MUX_SEL_TOP_ISP10, 8 , 1), + MUX(0, "mout_isp1_media_400", mout_isp1_media_400_p, + MUX_SEL_TOP_ISP10, 4, 1), + + MUX(0, "mout_sclk_isp1_spi0", mout_sclk_isp_spi_p, + MUX_SEL_TOP_ISP11, 4, 1), + MUX(0, "mout_sclk_isp1_spi1", mout_sclk_isp_spi_p, + MUX_SEL_TOP_ISP11, 8, 1), + MUX(0, "mout_sclk_isp1_uart", mout_sclk_isp_uart_p, + MUX_SEL_TOP_ISP11, 12, 1), + MUX(0, "mout_sclk_isp1_sensor2", mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 24, 1), + MUX(0, "mout_sclk_isp1_sensor1", mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 20, 1), + MUX(0, "mout_sclk_isp1_sensor0", mout_sclk_isp_sensor_p, + MUX_SEL_TOP_ISP11, 16, 1), + + MUX(0, "mout_aclk_mfc_333", mout_aclk_mfc_333_p, + MUX_SEL_TOP_MFC, 8, 1), + MUX(0, "mout_mfc_bustop_333", mout_mfc_bustop_333_p, + MUX_SEL_TOP_MFC, 4, 1), + + MUX(0, "mout_aclk_g2d_333", mout_aclk_g2d_333_p, + MUX_SEL_TOP_G2D, 8, 1), + MUX(0, "mout_g2d_bustop_333", mout_g2d_bustop_333_p, + MUX_SEL_TOP_G2D, 4, 1), + + MUX(0, "mout_aclk_gscl_fimc", mout_aclk_gscl_fimc_p, + MUX_SEL_TOP_GSCL, 20, 1), + MUX(0, "mout_gscl_bustop_fimc", mout_gscl_bustop_fimc_p, + MUX_SEL_TOP_GSCL, 16, 1), + MUX(0, "mout_aclk_gscl_333", mout_aclk_gscl_333_p, + MUX_SEL_TOP_GSCL, 12, 1), + MUX(0, "mout_gscl_bustop_333", mout_gscl_bustop_333_p, + MUX_SEL_TOP_GSCL, 8, 1), + MUX(0, "mout_aclk_gscl_400", mout_aclk_gscl_400_p, + MUX_SEL_TOP_GSCL, 4, 1), + MUX(0, "mout_m2m_mediatop_400", mout_m2m_mediatop_400_p, + MUX_SEL_TOP_GSCL, 0, 1), +}; + +struct samsung_div_clock top_div_clks[] __initdata = { + DIV(0, "dout_aclk_mfc_333", "mout_aclk_mfc_333", + DIV_TOP_G2D_MFC, 4, 3), + + DIV(0, "dout_aclk_g2d_333", "mout_aclk_g2d_333", + DIV_TOP_GSCL_ISP0, 0, 3), + + DIV(0, "dout_sclk_isp1_sensor2_a", "mout_aclk_gscl_fimc", + DIV_TOP_GSCL_ISP0, 24, 4), + DIV(0, "dout_sclk_isp1_sensor1_a", "mout_aclk_gscl_400", + DIV_TOP_GSCL_ISP0, 20, 4), + DIV(0, "dout_sclk_isp1_sensor0_a", "mout_aclk_gscl_fimc", + DIV_TOP_GSCL_ISP0, 16, 4), + DIV(0, "dout_aclk_gscl_fimc", "mout_aclk_gscl_fimc", + DIV_TOP_GSCL_ISP0, 8, 3), + DIV(0, "dout_aclk_gscl_400", "mout_aclk_gscl_400", + DIV_TOP_GSCL_ISP0, 4, 3), + DIV(0, "dout_aclk_gscl_333", "mout_aclk_gscl_333", + DIV_TOP_GSCL_ISP0, 0, 3), + + DIV(0, "dout_sclk_isp1_spi0_b", "dout_sclk_isp1_spi0_a", + DIV_TOP_ISP10, 16, 8), + DIV(0, "dout_sclk_isp1_spi0_a", "mout_sclk_isp1_spi0", + DIV_TOP_ISP10, 12, 4), + DIV(0, "dout_aclk_isp1_400", "mout_aclk_isp1_400", + DIV_TOP_ISP10, 4, 3), + DIV(0, "dout_aclk_isp1_266", "mout_aclk_isp1_266", + DIV_TOP_ISP10, 0, 3), + DIV(0, "dout_sclk_isp1_uart", "mout_sclk_isp1_uart", + DIV_TOP_ISP11, 12, 4), + DIV(0, "dout_sclk_isp1_spi1_b", "dout_sclk_isp1_spi1_a", + DIV_TOP_ISP11, 4, 8), + DIV(0, "dout_sclk_isp1_spi1_a", "mout_sclk_isp1_spi1", + DIV_TOP_ISP11, 0, 4), + DIV(0, "dout_sclk_isp1_sensor2_b", "dout_sclk_isp1_sensor2_a", + DIV_TOP_ISP11, 24, 4), + DIV(0, "dout_sclk_isp1_sensor1_b", "dout_sclk_isp1_sensor1_a", + DIV_TOP_ISP11, 20, 4), + DIV(0, "dout_sclk_isp1_sensor0_b", "dout_sclk_isp1_sensor0_a", + DIV_TOP_ISP11, 16, 4), + + DIV(0, "dout_sclk_hpm_targetclk", "mout_bustop_pll_user", + DIV_TOP_HPM, 0, 3), + + DIV(0, "dout_sclk_disp_pixel", "mout_sclk_disp_pixel", + DIV_TOP_DISP, 8, 3), + DIV(0, "dout_aclk_disp_222", "mout_aclk_disp_222", + DIV_TOP_DISP, 4, 3), + DIV(0, "dout_aclk_disp_333", "mout_aclk_disp_333", + DIV_TOP_DISP, 0, 3), + + DIV(0, "dout_aclk_bus4_100", "mout_bus4_bustop_100", + DIV_TOP_BUS, 28, 4), + DIV(0, "dout_aclk_bus4_400", "mout_bus4_bustop_400", + DIV_TOP_BUS, 24, 3), + DIV(0, "dout_aclk_bus3_100", "mout_bus3_bustop_100", + DIV_TOP_BUS, 20, 4), + DIV(0, "dout_aclk_bus3_400", "mout_bus3_bustop_400", + DIV_TOP_BUS, 16, 3), + DIV(0, "dout_aclk_bus2_100", "mout_bus2_bustop_100", + DIV_TOP_BUS, 12, 4), + DIV(0, "dout_aclk_bus2_400", "mout_bus2_bustop_400", + DIV_TOP_BUS, 8, 3), + DIV(0, "dout_aclk_bus1_100", "mout_bus1_bustop_100", + DIV_TOP_BUS, 4, 4), + DIV(0, "dout_aclk_bus1_400", "mout_bus1_bustop_400", + DIV_TOP_BUS, 0, 3), + + DIV(0, "dout_sclk_peri_spi1_b", "dout_sclk_peri_spi1_a", + DIV_TOP_PERI0, 20, 8), + DIV(0, "dout_sclk_peri_spi1_a", "mout_sclk_peri_spi1_clk", + DIV_TOP_PERI0, 16, 4), + DIV(0, "dout_sclk_peri_spi0_b", "dout_sclk_peri_spi0_a", + DIV_TOP_PERI0, 8, 8), + DIV(0, "dout_sclk_peri_spi0_a", "mout_sclk_peri_spi0_clk", + DIV_TOP_PERI0, 4, 4), + DIV(0, "dout_sclk_peri_uart0", "mout_sclk_peri_uart0_uclk", + DIV_TOP_PERI1, 24, 4), + DIV(0, "dout_sclk_peri_uart2", "mout_sclk_peri_uart2_uclk", + DIV_TOP_PERI1, 20, 4), + DIV(0, "dout_sclk_peri_uart1", "mout_sclk_peri_uart1_uclk", + DIV_TOP_PERI1, 16, 4), + DIV(0, "dout_sclk_peri_spi2_b", "dout_sclk_peri_spi2_a", + DIV_TOP_PERI1, 4, 8), + DIV(0, "dout_sclk_peri_spi2_a", "mout_sclk_peri_spi2_clk", + DIV_TOP_PERI1, 0, 4), + DIV(0, "dout_aclk_peri_aud", "mout_audtop_pll_user", + DIV_TOP_PERI2, 24, 3), + DIV(0, "dout_aclk_peri_66", "mout_bustop_pll_user", + DIV_TOP_PERI2, 20, 4), + + DIV(0, "dout_sclk_fsys_mmc0_sdclkin_b", + "dout_sclk_fsys_mmc0_sdclkin_a", + DIV_TOP_FSYS0, 16, 8), + DIV(0, "dout_sclk_fsys_mmc0_sdclkin_a", + "mout_sclk_fsys_mmc0_sdclkin_b", + DIV_TOP_FSYS0, 12, 4), + DIV(0, "dout_sclk_fsys_usbdrd30_suspend_clk", + "mout_sclk_fsys_usb", + DIV_TOP_FSYS0, 4, 4), + DIV(0, "dout_aclk_fsys_200", "mout_bustop_pll_user", + DIV_TOP_FSYS0, 0, 3), + + DIV(0, "dout_sclk_fsys_mmc2_sdclkin_b", + "dout_sclk_fsys_mmc2_sdclkin_a", + DIV_TOP_FSYS1, 16, 8), + DIV(0, "dout_sclk_fsys_mmc2_sdclkin_a", + "mout_sclk_fsys_mmc2_sdclkin_b", + DIV_TOP_FSYS1, 12, 4), + DIV(0, "dout_sclk_fsys_mmc1_sdclkin_b", + "dout_sclk_fsys_mmc1_sdclkin_a", + DIV_TOP_FSYS1, 4, 8), + DIV(0, "dout_sclk_fsys_mmc1_sdclkin_a", + "mout_sclk_fsys_mmc1_sdclkin_b", + DIV_TOP_FSYS1, 0, 4), +}; + +struct samsung_gate_clock top_gate_clks[] __initdata = { + GATE(TOP_SCLK_FIMD1, "sclk_disp_pixel", "dout_sclk_disp_pixel", + EN_ACLK_TOP, 10, CLK_SET_RATE_PARENT, 0), + GATE(TOP_SCLK_MMC2, "sclk_fsys_mmc2_sdclkin", + "dout_sclk_fsys_mmc2_sdclkin_b", + EN_SCLK_TOP, 9, CLK_SET_RATE_PARENT, 0), + GATE(TOP_SCLK_MMC1, "sclk_fsys_mmc1_sdclkin", + "dout_sclk_fsys_mmc1_sdclkin_b", + EN_SCLK_TOP, 8, CLK_SET_RATE_PARENT, + 0), + GATE(TOP_SCLK_MMC0, "sclk_fsys_mmc0_sdclkin", + "dout_sclk_fsys_mmc0_sdclkin_b", + EN_SCLK_TOP, 7, CLK_SET_RATE_PARENT, 0), +}; + + + +static struct samsung_pll_clock top_pll_clks[] __initdata = { + PLL(pll_2550xx, TOP_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll", + DISP_PLL_LOCK, DISP_PLL_CON0, + pll2550_24mhz_tbl), + PLL(pll_2650xx, TOP_FOUT_AUD_PLL, "fout_aud_pll", "fin_pll", + AUD_PLL_LOCK, AUD_PLL_CON0, + pll2650_24mhz_tbl), +}; + +static void __init exynos5260_clk_top_init(struct device_node *np) +{ + struct exynos5260_cmu_info cmu; + struct samsung_clk_provider *ctx; + + memset(&cmu, 0, sizeof(cmu)); + + cmu.pll_clks = top_pll_clks; + cmu.nr_pll_clks = ARRAY_SIZE(top_pll_clks); + cmu.mux_clks = top_mux_clks; + cmu.nr_mux_clks = ARRAY_SIZE(top_mux_clks); + cmu.div_clks = top_div_clks; + cmu.nr_div_clks = ARRAY_SIZE(top_div_clks); + cmu.gate_clks = top_gate_clks; + cmu.nr_gate_clks = ARRAY_SIZE(top_gate_clks); + cmu.nr_clk_ids = TOP_NR_CLK; + cmu.clk_regs = top_clk_regs; + cmu.nr_clk_regs = ARRAY_SIZE(top_clk_regs); + + ctx = exynos5260_cmu_register_one(np, &cmu); + + samsung_clk_of_register_fixed_ext(ctx, fixed_rate_ext_clks, + ARRAY_SIZE(fixed_rate_ext_clks), + ext_clk_match); + + samsung_clk_register_fixed_rate(ctx, + fixed_rate_clks, + ARRAY_SIZE(fixed_rate_clks)); +} + +CLK_OF_DECLARE(exynos5260_clk_top, "samsung,exynos5260-clock-top", + exynos5260_clk_top_init); diff --git a/drivers/clk/samsung/clk-exynos5260.h b/drivers/clk/samsung/clk-exynos5260.h new file mode 100644 index 0000000..7c3717a --- /dev/null +++ b/drivers/clk/samsung/clk-exynos5260.h @@ -0,0 +1,448 @@ +#ifndef __CLK_EXYNOS5260_H +#define __CLK_EXYNOS5260_H + +/* +*Registers for CMU_AUD +*/ +#define MUX_SEL_AUD 0x0200 +#define MUX_ENABLE_AUD 0x0300 +#define MUX_STAT_AUD 0x0400 +#define MUX_IGNORE_AUD 0x0500 +#define DIV_AUD0 0x0600 +#define DIV_AUD1 0x0604 +#define DIV_STAT_AUD0 0x0700 +#define DIV_STAT_AUD1 0x0704 +#define EN_ACLK_AUD 0x0800 +#define EN_PCLK_AUD 0x0900 +#define EN_SCLK_AUD 0x0a00 +#define EN_IP_AUD 0x0b00 + +/* +*Registers for CMU_DISP +*/ +#define MUX_SEL_DISP0 0x0200 +#define MUX_SEL_DISP1 0x0204 +#define MUX_SEL_DISP2 0x0208 +#define MUX_SEL_DISP3 0x020C +#define MUX_SEL_DISP4 0x0210 +#define MUX_ENABLE_DISP0 0x0300 +#define MUX_ENABLE_DISP1 0x0304 +#define MUX_ENABLE_DISP2 0x0308 +#define MUX_ENABLE_DISP3 0x030c +#define MUX_ENABLE_DISP4 0x0310 +#define MUX_STAT_DISP0 0x0400 +#define MUX_STAT_DISP1 0x0404 +#define MUX_STAT_DISP2 0x0408 +#define MUX_STAT_DISP3 0x040c +#define MUX_STAT_DISP4 0x0410 +#define MUX_IGNORE_DISP0 0x0500 +#define MUX_IGNORE_DISP1 0x0504 +#define MUX_IGNORE_DISP2 0x0508 +#define MUX_IGNORE_DISP3 0x050c +#define MUX_IGNORE_DISP4 0x0510 +#define DIV_DISP 0x0600 +#define DIV_STAT_DISP 0x0700 +#define EN_ACLK_DISP 0x0800 +#define EN_PCLK_DISP 0x0900 +#define EN_SCLK_DISP0 0x0a00 +#define EN_SCLK_DISP1 0x0a04 +#define EN_IP_DISP 0x0b00 +#define EN_IP_DISP_BUS 0x0b04 + + +/* +*Registers for CMU_EGL +*/ +#define EGL_PLL_LOCK 0x0000 +#define EGL_DPLL_LOCK 0x0004 +#define EGL_PLL_CON0 0x0100 +#define EGL_PLL_CON1 0x0104 +#define EGL_PLL_FREQ_DET 0x010c +#define EGL_DPLL_CON0 0x0110 +#define EGL_DPLL_CON1 0x0114 +#define EGL_DPLL_FREQ_DET 0x011c +#define MUX_SEL_EGL 0x0200 +#define MUX_ENABLE_EGL 0x0300 +#define MUX_STAT_EGL 0x0400 +#define DIV_EGL 0x0600 +#define DIV_EGL_PLL_FDET 0x0604 +#define DIV_STAT_EGL 0x0700 +#define DIV_STAT_EGL_PLL_FDET 0x0704 +#define EN_ACLK_EGL 0x0800 +#define EN_PCLK_EGL 0x0900 +#define EN_SCLK_EGL 0x0a00 +#define EN_IP_EGL 0x0b00 +#define CLKOUT_CMU_EGL 0x0c00 +#define CLKOUT_CMU_EGL_DIV_STAT 0x0c04 +#define ARMCLK_STOPCTRL 0x1000 +#define EAGLE_EMA_CTRL 0x1008 +#define EAGLE_EMA_STATUS 0x100c +#define PWR_CTRL 0x1020 +#define PWR_CTRL2 0x1024 +#define CLKSTOP_CTRL 0x1028 +#define INTR_SPREAD_EN 0x1080 +#define INTR_SPREAD_USE_STANDBYWFI 0x1084 +#define INTR_SPREAD_BLOCKING_DURATION 0x1088 +#define CMU_EGL_SPARE0 0x2000 +#define CMU_EGL_SPARE1 0x2004 +#define CMU_EGL_SPARE2 0x2008 +#define CMU_EGL_SPARE3 0x200c +#define CMU_EGL_SPARE4 0x2010 + +/* +*Registers for CMU_FSYS +*/ + +#define MUX_SEL_FSYS0 0x0200 +#define MUX_SEL_FSYS1 0x0204 +#define MUX_ENABLE_FSYS0 0x0300 +#define MUX_ENABLE_FSYS1 0x0304 +#define MUX_STAT_FSYS0 0x0400 +#define MUX_STAT_FSYS1 0x0404 +#define MUX_IGNORE_FSYS0 0x0500 +#define MUX_IGNORE_FSYS1 0x0504 +#define EN_ACLK_FSYS 0x0800 +#define EN_ACLK_FSYS_SECURE_RTIC 0x0804 +#define EN_ACLK_FSYS_SECURE_SMMU_RTIC 0x0808 +#define EN_PCLK_FSYS 0x0900 +#define EN_SCLK_FSYS 0x0a00 +#define EN_IP_FSYS 0x0b00 +#define EN_IP_FSYS_SECURE_RTIC 0x0b04 +#define EN_IP_FSYS_SECURE_SMMU_RTIC 0x0b08 + +/* +*Registers for CMU_G2D +*/ + +#define MUX_SEL_G2D 0x0200 +#define MUX_ENABLE_G2D 0x0300 +#define MUX_STAT_G2D 0x0400 +#define DIV_G2D 0x0600 +#define DIV_STAT_G2D 0x0700 +#define EN_ACLK_G2D 0x0800 +#define EN_ACLK_G2D_SECURE_SSS 0x0804 +#define EN_ACLK_G2D_SECURE_SLIM_SSS 0x0808 +#define EN_ACLK_G2D_SECURE_SMMU_SLIM_SSS 0x080c +#define EN_ACLK_G2D_SECURE_SMMU_SSS 0x0810 +#define EN_ACLK_G2D_SECURE_SMMU_MDMA 0x0814 +#define EN_ACLK_G2D_SECURE_SMMU_G2D 0x0818 +#define EN_PCLK_G2D 0x0900 +#define EN_PCLK_G2D_SECURE_SMMU_SLIM_SSS 0x0904 +#define EN_PCLK_G2D_SECURE_SMMU_SSS 0x0908 +#define EN_PCLK_G2D_SECURE_SMMU_MDMA 0x090c +#define EN_PCLK_G2D_SECURE_SMMU_G2D 0x0910 +#define EN_IP_G2D 0x0b00 +#define EN_IP_G2D_SECURE_SSS 0x0b04 +#define EN_IP_G2D_SECURE_SLIM_SSS 0x0b08 +#define EN_IP_G2D_SECURE_SMMU_SLIM_SSS 0x0b0c +#define EN_IP_G2D_SECURE_SMMU_SSS 0x0b10 +#define EN_IP_G2D_SECURE_SMMU_MDMA 0x0b14 +#define EN_IP_G2D_SECURE_SMMU_G2D 0x0b18 + +/* +*Registers for CMU_G3D +*/ + +#define G3D_PLL_LOCK 0x0000 +#define G3D_PLL_CON0 0x0100 +#define G3D_PLL_CON1 0x0104 +#define G3D_PLL_FDET 0x010c +#define MUX_SEL_G3D 0x0200 +#define MUX_EN_G3D 0x0300 +#define MUX_STAT_G3D 0x0400 +#define MUX_IGNORE_G3D 0x0500 +#define DIV_G3D 0x0600 +#define DIV_G3D_PLL_FDET 0x0604 +#define DIV_STAT_G3D 0x0700 +#define DIV_STAT_G3D_PLL_FDET 0x0704 +#define EN_ACLK_G3D 0x0800 +#define EN_PCLK_G3D 0x0900 +#define EN_SCLK_G3D 0x0a00 +#define EN_IP_G3D 0x0b00 +#define CLKOUT_CMU_G3D 0x0c00 +#define CLKOUT_CMU_G3D_DIV_STAT 0x0c04 +#define G3DCLK_STOPCTRL 0x1000 +#define G3D_EMA_CTRL 0x1008 +#define G3D_EMA_STATUS 0x100c + +/* +*Registers for CMU_GSCL +*/ + +#define MUX_SEL_GSCL 0x0200 +#define MUX_EN_GSCL 0x0300 +#define MUX_STAT_GSCL 0x0400 +#define MUX_IGNORE_GSCL 0x0500 +#define DIV_GSCL 0x0600 +#define DIV_STAT_GSCL 0x0700 +#define EN_ACLK_GSCL 0x0800 +#define EN_ACLK_GSCL_FIMC 0x0804 +#define EN_ACLK_GSCL_SECURE_SMMU_GSCL0 0x0808 +#define EN_ACLK_GSCL_SECURE_SMMU_GSCL1 0x080c +#define EN_ACLK_GSCL_SECURE_SMMU_MSCL0 0x0810 +#define EN_ACLK_GSCL_SECURE_SMMU_MSCL1 0x0814 +#define EN_PCLK_GSCL 0x0900 +#define EN_PCLK_GSCL_FIMC 0x0904 +#define EN_PCLK_GSCL_SECURE_SMMU_GSCL0 0x0908 +#define EN_PCLK_GSCL_SECURE_SMMU_GSCL1 0x090c +#define EN_PCLK_GSCL_SECURE_SMMU_MSCL0 0x0910 +#define EN_PCLK_GSCL_SECURE_SMMU_MSCL1 0x0914 +#define EN_SCLK_GSCL 0x0a00 +#define EN_SCLK_GSCL_FIMC 0x0a04 +#define EN_IP_GSCL 0x0b00 +#define EN_IP_GSCL_FIMC 0x0b04 +#define EN_IP_GSCL_SECURE_SMMU_GSCL0 0x0b08 +#define EN_IP_GSCL_SECURE_SMMU_GSCL1 0x0b0c +#define EN_IP_GSCL_SECURE_SMMU_MSCL0 0x0b10 +#define EN_IP_GSCL_SECURE_SMMU_MSCL1 0x0b14 + +/* +*Registers for CMU_ISP +*/ +#define MUX_SEL_ISP0 0x0200 +#define MUX_SEL_ISP1 0x0204 +#define MUX_ENABLE_ISP0 0x0300 +#define MUX_ENABLE_ISP1 0x0304 +#define MUX_STAT_ISP0 0x0400 +#define MUX_STAT_ISP1 0x0404 +#define MUX_IGNORE_ISP0 0x0500 +#define MUX_IGNORE_ISP1 0x0504 +#define DIV_ISP 0x0600 +#define DIV_STAT_ISP 0x0700 +#define EN_ACLK_ISP0 0x0800 +#define EN_ACLK_ISP1 0x0804 +#define EN_PCLK_ISP0 0x0900 +#define EN_PCLK_ISP1 0x0904 +#define EN_SCLK_ISP 0x0a00 +#define EN_IP_ISP0 0x0b00 +#define EN_IP_ISP1 0x0b04 + +/* +*Registers for CMU_KFC +*/ +#define KFC_PLL_LOCK 0x0000 +#define KFC_PLL_CON0 0x0100 +#define KFC_PLL_CON1 0x0104 +#define KFC_PLL_FDET 0x010c +#define MUX_SEL_KFC0 0x0200 +#define MUX_SEL_KFC2 0x0208 +#define MUX_ENABLE_KFC0 0x0300 +#define MUX_ENABLE_KFC2 0x0308 +#define MUX_STAT_KFC0 0x0400 +#define MUX_STAT_KFC2 0x0408 +#define DIV_KFC 0x0600 +#define DIV_KFC_PLL_FDET 0x0604 +#define DIV_STAT_KFC 0x0700 +#define DIV_STAT_KFC_PLL_FDET 0x0704 +#define EN_ACLK_KFC 0x0800 +#define EN_PCLK_KFC 0x0900 +#define EN_SCLK_KFC 0x0a00 +#define EN_IP_KFC 0x0b00 +#define CLKOUT_CMU_KFC 0x0c00 +#define CLKOUT_CMU_KFC_DIV_STAT 0x0c04 +#define ARMCLK_STOPCTRL_KFC 0x1000 +#define ARM_EMA_CTRL 0x1008 +#define ARM_EMA_STATUS 0x100c +#define PWR_CTRL_KFC 0x1020 +#define PWR_CTRL2_KFC 0x1024 +#define CLKSTOP_CTRL_KFC 0x1028 +#define INTR_SPREAD_ENABLE_KFC 0x1080 +#define INTR_SPREAD_USE_STANDBYWFI_KFC 0x1084 +#define INTR_SPREAD_BLOCKING_DURATION_KFC 0x1088 +#define CMU_KFC_SPARE0 0x2000 +#define CMU_KFC_SPARE1 0x2004 +#define CMU_KFC_SPARE2 0x2008 +#define CMU_KFC_SPARE3 0x200c +#define CMU_KFC_SPARE4 0x2010 + +/* +*Registers for CMU_MFC +*/ +#define MUX_SEL_MFC 0x0200 +#define MUX_ENABLE_MFC 0x0300 +#define MUX_STAT_MFC 0x0400 +#define DIV_MFC 0x0600 +#define DIV_STAT_MFC 0x0700 +#define EN_ACLK_MFC 0x0800 +#define EN_ACLK_SECURE_SMMU2_MFC 0x0804 +#define EN_PCLK_MFC 0x0900 +#define EN_PCLK_SECURE_SMMU2_MFC 0x0904 +#define EN_IP_MFC 0x0b00 +#define EN_IP_MFC_SECURE_SMMU2_MFC 0x0b04 + +/* +*Registers for CMU_MIF +*/ +#define MEM_PLL_LOCK 0x0000 +#define BUS_PLL_LOCK 0x0004 +#define MEDIA_PLL_LOCK 0x0008 +#define MEM_PLL_CON0 0x0100 +#define MEM_PLL_CON1 0x0104 +#define MEM_PLL_FDET 0x010c +#define BUS_PLL_CON0 0x0110 +#define BUS_PLL_CON1 0x0114 +#define BUS_PLL_FDET 0x011c +#define MEDIA_PLL_CON0 0x0120 +#define MEDIA_PLL_CON1 0x0124 +#define MEDIA_PLL_FDET 0x012c +#define MUX_SEL_MIF 0x0200 +#define MUX_ENABLE_MIF 0x0300 +#define MUX_STAT_MIF 0x0400 +#define MUX_IGNORE_MIF 0x0500 +#define DIV_MIF 0x0600 +#define DIV_MIF_PLL_FDET 0x0604 +#define DIV_STAT_MIF 0x0700 +#define DIV_STAT_MIF_PLL_FDET 0x0704 +#define EN_ACLK_MIF 0x0800 +#define EN_ACLK_MIF_SECURE_DREX1_TZ 0x0804 +#define EN_ACLK_MIF_SECURE_DREX0_TZ 0x0808 +#define EN_ACLK_MIF_SECURE_INTMEM 0x080c +#define EN_PCLK_MIF 0x0900 +#define EN_PCLK_MIF_SECURE_MONOCNT 0x0904 +#define EN_PCLK_MIF_SECURE_RTC_APBIF 0x0908 +#define EN_PCLK_MIF_SECURE_DREX1_TZ 0x090c +#define EN_PCLK_MIF_SECURE_DREX0_TZ 0x0910 +#define EN_SCLK_MIF 0x0a00 +#define EN_IP_MIF 0x0b00 +#define EN_IP_MIF_SECURE_MONOCNT 0x0b04 +#define EN_IP_MIF_SECURE_RTC_APBIF 0x0b08 +#define EN_IP_MIF_SECURE_DREX1_TZ 0x0b0c +#define EN_IP_MIF_SECURE_DREX0_TZ 0x0b10 +#define EN_IP_MIF_SECURE_INTEMEM 0x0b14 +#define CLKOUT_CMU_MIF_DIV_STAT 0x0c04 +#define DREX_FREQ_CTRL 0x1000 +#define PAUSE 0x1004 +#define DDRPHY_LOCK_CTRL 0x1008 +#define CLKOUT_CMU_MIF 0xcb00 + +/* +*Registers for CMU_PERI +*/ +#define MUX_SEL_PERI 0x0200 +#define MUX_SEL_PERI1 0x0204 +#define MUX_ENABLE_PERI 0x0300 +#define MUX_ENABLE_PERI1 0x0304 +#define MUX_STAT_PERI 0x0400 +#define MUX_STAT_PERI1 0x0404 +#define MUX_IGNORE_PERI 0x0500 +#define MUX_IGNORE_PERI1 0x0504 +#define DIV_PERI 0x0600 +#define DIV_STAT_PERI 0x0700 +#define EN_PCLK_PERI0 0x0800 +#define EN_PCLK_PERI1 0x0804 +#define EN_PCLK_PERI2 0x0808 +#define EN_PCLK_PERI3 0x080c +#define EN_PCLK_PERI_SECURE_CHIPID 0x0810 +#define EN_PCLK_PERI_SECURE_PROVKEY0 0x0814 +#define EN_PCLK_PERI_SECURE_PROVKEY1 0x0818 +#define EN_PCLK_PERI_SECURE_SECKEY 0x081c +#define EN_PCLK_PERI_SECURE_ANTIRBKCNT 0x0820 +#define EN_PCLK_PERI_SECURE_TOP_RTC 0x0824 +#define EN_PCLK_PERI_SECURE_TZPC 0x0828 +#define EN_SCLK_PERI 0x0a00 +#define EN_SCLK_PERI_SECURE_TOP_RTC 0x0a04 +#define EN_IP_PERI0 0x0b00 +#define EN_IP_PERI1 0x0b04 +#define EN_IP_PERI2 0x0b08 +#define EN_IP_PERI_SECURE_CHIPID 0x0b0c +#define EN_IP_PERI_SECURE_PROVKEY0 0x0b10 +#define EN_IP_PERI_SECURE_PROVKEY1 0x0b14 +#define EN_IP_PERI_SECURE_SECKEY 0x0b18 +#define EN_IP_PERI_SECURE_ANTIRBKCNT 0x0b1c +#define EN_IP_PERI_SECURE_TOP_RTC 0x0b20 +#define EN_IP_PERI_SECURE_TZPC 0x0b24 + +/* +*Registers for CMU_TOP +*/ +#define DISP_PLL_LOCK 0x0000 +#define AUD_PLL_LOCK 0x0004 +#define DISP_PLL_CON0 0x0100 +#define DISP_PLL_CON1 0x0104 +#define DISP_PLL_FDET 0x0108 +#define AUD_PLL_CON0 0x0110 +#define AUD_PLL_CON1 0x0114 +#define AUD_PLL_CON2 0x0118 +#define AUD_PLL_FDET 0x011c +#define MUX_SEL_TOP_PLL0 0x0200 +#define MUX_SEL_TOP_MFC 0x0204 +#define MUX_SEL_TOP_G2D 0x0208 +#define MUX_SEL_TOP_GSCL 0x020c +#define MUX_SEL_TOP_ISP10 0x0214 +#define MUX_SEL_TOP_ISP11 0x0218 +#define MUX_SEL_TOP_DISP0 0x021c +#define MUX_SEL_TOP_DISP1 0x0220 +#define MUX_SEL_TOP_BUS 0x0224 +#define MUX_SEL_TOP_PERI0 0x0228 +#define MUX_SEL_TOP_PERI1 0x022c +#define MUX_SEL_TOP_FSYS 0x0230 +#define MUX_ENABLE_TOP_PLL0 0x0300 +#define MUX_ENABLE_TOP_MFC 0x0304 +#define MUX_ENABLE_TOP_G2D 0x0308 +#define MUX_ENABLE_TOP_GSCL 0x030c +#define MUX_ENABLE_TOP_ISP10 0x0314 +#define MUX_ENABLE_TOP_ISP11 0x0318 +#define MUX_ENABLE_TOP_DISP0 0x031c +#define MUX_ENABLE_TOP_DISP1 0x0320 +#define MUX_ENABLE_TOP_BUS 0x0324 +#define MUX_ENABLE_TOP_PERI0 0x0328 +#define MUX_ENABLE_TOP_PERI1 0x032c +#define MUX_ENABLE_TOP_FSYS 0x0330 +#define MUX_STAT_TOP_PLL0 0x0400 +#define MUX_STAT_TOP_MFC 0x0404 +#define MUX_STAT_TOP_G2D 0x0408 +#define MUX_STAT_TOP_GSCL 0x040c +#define MUX_STAT_TOP_ISP10 0x0414 +#define MUX_STAT_TOP_ISP11 0x0418 +#define MUX_STAT_TOP_DISP0 0x041c +#define MUX_STAT_TOP_DISP1 0x0420 +#define MUX_STAT_TOP_BUS 0x0424 +#define MUX_STAT_TOP_PERI0 0x0428 +#define MUX_STAT_TOP_PERI1 0x042c +#define MUX_STAT_TOP_FSYS 0x0430 +#define MUX_IGNORE_TOP_PLL0 0x0500 +#define MUX_IGNORE_TOP_MFC 0x0504 +#define MUX_IGNORE_TOP_G2D 0x0508 +#define MUX_IGNORE_TOP_GSCL 0x050c +#define MUX_IGNORE_TOP_ISP10 0x0514 +#define MUX_IGNORE_TOP_ISP11 0x0518 +#define MUX_IGNORE_TOP_DISP0 0x051c +#define MUX_IGNORE_TOP_DISP1 0x0520 +#define MUX_IGNORE_TOP_BUS 0x0524 +#define MUX_IGNORE_TOP_PERI0 0x0528 +#define MUX_IGNORE_TOP_PERI1 0x052c +#define MUX_IGNORE_TOP_FSYS 0x0530 +#define DIV_TOP_G2D_MFC 0x0600 +#define DIV_TOP_GSCL_ISP0 0x0604 +#define DIV_TOP_ISP10 0x0608 +#define DIV_TOP_ISP11 0x060c +#define DIV_TOP_DISP 0x0610 +#define DIV_TOP_BUS 0x0614 +#define DIV_TOP_PERI0 0x0618 +#define DIV_TOP_PERI1 0x061c +#define DIV_TOP_PERI2 0x0620 +#define DIV_TOP_FSYS0 0x0624 +#define DIV_TOP_FSYS1 0x0628 +#define DIV_TOP_HPM 0x062c +#define DIV_TOP_PLL_FDET 0x0630 +#define DIV_STAT_TOP_G2D_MFC 0x0700 +#define DIV_STAT_TOP_GSCL_ISP0 0x0704 +#define DIV_STAT_TOP_ISP10 0x0708 +#define DIV_STAT_TOP_ISP11 0x070c +#define DIV_STAT_TOP_DISP 0x0710 +#define DIV_STAT_TOP_BUS 0x0714 +#define DIV_STAT_TOP_PERI0 0x0718 +#define DIV_STAT_TOP_PERI1 0x071c +#define DIV_STAT_TOP_PERI2 0x0720 +#define DIV_STAT_TOP_FSYS0 0x0724 +#define DIV_STAT_TOP_FSYS1 0x0728 +#define DIV_STAT_TOP_HPM 0x072c +#define DIV_STAT_TOP_PLL_FDET 0x0730 +#define EN_ACLK_TOP 0x0800 +#define EN_SCLK_TOP 0x0a00 +#define EN_IP_TOP 0x0b00 +#define CLKOUT_CMU_TOP 0x0c00 +#define CLKOUT_CMU_TOP_DIV_STAT 0x0c04 + +#endif /*__CLK_EXYNOS5260_H */ + -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
end of thread, other threads:[~2014-03-10 2:10 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-03-06 13:45 [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 Rahul Sharma 2014-03-07 13:56 ` Pankaj Dubey 2014-03-07 14:12 ` Tomasz Figa 2014-03-07 15:10 ` Pankaj Dubey 2014-03-07 15:22 ` Tomasz Figa 2014-03-07 19:20 ` Rahul Sharma 2014-03-08 9:24 ` Pankaj Dubey 2014-03-09 23:59 ` Tomasz Figa 2014-03-10 2:10 ` Rahul Sharma 2014-03-07 18:41 ` Rahul Sharma 2014-03-08 4:53 ` Pankaj Dubey -- strict thread matches above, loose matches on Subject: below -- 2014-03-04 11:12 [PATCH v4 0/5] clk: exynos: add support for exynos5260 SoC Rahul Sharma 2014-03-04 11:12 ` [PATCH v4 5/5] clk/exynos5260: add clock file for exynos5260 Rahul Sharma
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).