linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: monstr@monstr.eu (Michal Simek)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH] edac: zynq: Added EDAC support for zynq ddr ecc controller
Date: Mon, 10 Mar 2014 12:58:56 +0100	[thread overview]
Message-ID: <531DA900.5060202@monstr.eu> (raw)
In-Reply-To: <20140310105655.GH14999@e106331-lin.cambridge.arm.com>

On 03/10/2014 11:56 AM, Mark Rutland wrote:
> On Sun, Mar 09, 2014 at 02:57:16AM +0000, Punnaiah Choudary Kalluri wrote:
>> Added EDAC support for reporting the ecc errors of zynq ddr controller.
>> The ddr ecc controller corrects single bit errors and detects double bit
>> errors
>>
>> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
>> ---
>>  .../devicetree/bindings/edac/zynq_edac.txt         |   18 +
>>  drivers/edac/Kconfig                               |    7 +
>>  drivers/edac/Makefile                              |    1 +
>>  drivers/edac/zynq_edac.c                           |  613 ++++++++++++++++++++
>>  4 files changed, 639 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/edac/zynq_edac.txt
>>  create mode 100644 drivers/edac/zynq_edac.c
>>
>> diff --git a/Documentation/devicetree/bindings/edac/zynq_edac.txt b/Documentation/devicetree/bindings/edac/zynq_edac.txt
>> new file mode 100644
>> index 0000000..c21ff83
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/edac/zynq_edac.txt
>> @@ -0,0 +1,18 @@
>> +Zynq EDAC driver, it does reports the DDR ECC single bit errors that are
>> +corrected and double bit ecc errors that are detected by the DDR ECC controller.
>> +ECC support for DDR is available in half-bus width(16 bit) configuration only.
>> +
>> +Required properties:
>> +- compatible: Should be "xlnx,ps7-ddrc" or "xlnx,ps7-ddrc-1.00.a"
> 
> Is this an or or a xor?

Compatible string should be just xlnx,zynq-ddrc-1.00.a.
Nothing with ps7.

Thanks,
Michal


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140310/e9df4092/attachment.sig>

  reply	other threads:[~2014-03-10 11:58 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-09  2:57 [RFC PATCH] edac: zynq: Added EDAC support for zynq ddr ecc controller Punnaiah Choudary Kalluri
2014-03-10 10:56 ` Mark Rutland
2014-03-10 11:58   ` Michal Simek [this message]
2014-03-10 22:32     ` Sören Brinkmann
2014-03-11  8:32       ` Michal Simek
2014-03-11 15:50         ` Sören Brinkmann
     [not found]         ` <20140311155057.GJ13293@xsjandreislx>
2014-03-12 10:27           ` Michal Simek
2014-03-12 16:13             ` Sören Brinkmann
     [not found]             ` <20140312161344.GA3000@xsjandreislx>
2014-03-12 16:50               ` Michal Simek
     [not found]               ` <53209047.8070308@xilinx.com>
2014-03-13 17:21                 ` Punnaiah Choudary Kalluri
2014-03-11  7:25     ` Punnaiah Choudary Kalluri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=531DA900.5060202@monstr.eu \
    --to=monstr@monstr.eu \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).