From: preeti@linux.vnet.ibm.com (Preeti U Murthy)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 4/6] sched: powerpc: create a dedicated topology table
Date: Tue, 11 Mar 2014 15:38:07 +0530 [thread overview]
Message-ID: <531EE087.7050707@linux.vnet.ibm.com> (raw)
In-Reply-To: <1394003906-11630-5-git-send-email-vincent.guittot@linaro.org>
Hi Vincent,
On 03/05/2014 12:48 PM, Vincent Guittot wrote:
> Create a dedicated topology table for handling asymetric feature.
> The current proposal creates a new level which describes which groups of CPUs
> take adavantge of SD_ASYM_PACKING. The useless level will be removed during the
> build of the sched_domain topology.
>
> Another solution would be to set SD_ASYM_PACKING in the sd_flags of SMT level
> during the boot sequence and before the build of the sched_domain topology.
Is the below what you mean as the other solution? If it is so, I would
strongly recommend this approach rather than adding another level to the
topology level to represent the asymmetric behaviour.
+static struct sched_domain_topology_level powerpc_topology[] = {
+#ifdef CONFIG_SCHED_SMT
+ { cpu_smt_mask, SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES,
SD_INIT_NAME(SMT) | arch_sd_sibling_asym_packing() },
+#endif
+ { cpu_cpu_mask, SD_INIT_NAME(DIE) },
+ { NULL, },
+};
Regards
Preeti U Murthy
>
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> ---
> arch/powerpc/kernel/smp.c | 35 +++++++++++++++++++++++++++--------
> kernel/sched/core.c | 6 ------
> 2 files changed, 27 insertions(+), 14 deletions(-)
>
> diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
> index ac2621a..75da054 100644
> --- a/arch/powerpc/kernel/smp.c
> +++ b/arch/powerpc/kernel/smp.c
> @@ -755,6 +755,32 @@ int setup_profiling_timer(unsigned int multiplier)
> return 0;
> }
>
> +#ifdef CONFIG_SCHED_SMT
> +/* cpumask of CPUs with asymetric SMT dependancy */
> +static const struct cpumask *cpu_asmt_mask(int cpu)
> +{
> + if (cpu_has_feature(CPU_FTR_ASYM_SMT)) {
> + printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n");
> + return topology_thread_cpumask(cpu);
> + }
> + return cpumask_of(cpu);
> +}
> +#endif
> +
> +static struct sched_domain_topology_level powerpc_topology[] = {
> +#ifdef CONFIG_SCHED_SMT
> + { cpu_asmt_mask, SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES | SD_ASYM_PACKING, SD_INIT_NAME(ASMT) },
> + { cpu_smt_mask, SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES, SD_INIT_NAME(SMT) },
> +#endif
> + { cpu_cpu_mask, SD_INIT_NAME(DIE) },
> + { NULL, },
> +};
> +
> +static void __init set_sched_topology(void)
> +{
> + sched_domain_topology = powerpc_topology;
> +}
> +
> void __init smp_cpus_done(unsigned int max_cpus)
> {
> cpumask_var_t old_mask;
> @@ -779,15 +805,8 @@ void __init smp_cpus_done(unsigned int max_cpus)
>
> dump_numa_cpu_topology();
>
> -}
> + set_sched_topology();
>
> -int arch_sd_sibling_asym_packing(void)
> -{
> - if (cpu_has_feature(CPU_FTR_ASYM_SMT)) {
> - printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n");
> - return SD_ASYM_PACKING;
> - }
> - return 0;
> }
>
> #ifdef CONFIG_HOTPLUG_CPU
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> index 3479467..7606de0 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -5818,11 +5818,6 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
> atomic_set(&sg->sgp->nr_busy_cpus, sg->group_weight);
> }
>
> -int __weak arch_sd_sibling_asym_packing(void)
> -{
> - return 0*SD_ASYM_PACKING;
> -}
> -
> /*
> * Initializers for schedule domains
> * Non-inlined to reduce accumulated stack pressure in build_sched_domains()
> @@ -6000,7 +5995,6 @@ sd_init(struct sched_domain_topology_level *tl, int cpu)
> if (sd->flags & SD_SHARE_CPUPOWER) {
> sd->imbalance_pct = 110;
> sd->smt_gain = 1178; /* ~15% */
> - sd->flags |= arch_sd_sibling_asym_packing();
>
> } else if (sd->flags & SD_SHARE_PKG_RESOURCES) {
> sd->imbalance_pct = 117;
>
next prev parent reply other threads:[~2014-03-11 10:08 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-05 7:18 [RFC 0/6] rework sched_domain topology description Vincent Guittot
2014-03-05 7:18 ` [PATCH 2/6] sched: rework of sched_domain topology definition Vincent Guittot
2014-03-05 17:09 ` Dietmar Eggemann
2014-03-06 8:32 ` Vincent Guittot
2014-03-11 10:31 ` Peter Zijlstra
2014-03-11 13:27 ` Vincent Guittot
2014-03-11 13:48 ` Dietmar Eggemann
[not found] ` <1394003906-11630-7-git-send-email-vincent.guittot@linaro.org>
2014-03-05 22:38 ` [RFC 6/6] sched: ARM: create a dedicated scheduler topology table Dietmar Eggemann
2014-03-06 8:42 ` Vincent Guittot
2014-03-05 23:17 ` [RFC 0/6] rework sched_domain topology description Dietmar Eggemann
2014-03-06 9:04 ` Vincent Guittot
2014-03-06 12:31 ` Dietmar Eggemann
2014-03-07 2:47 ` Vincent Guittot
2014-03-08 12:40 ` Dietmar Eggemann
2014-03-10 13:21 ` Vincent Guittot
2014-03-11 13:17 ` Peter Zijlstra
2014-03-12 13:28 ` Dietmar Eggemann
2014-03-12 13:47 ` Vincent Guittot
2014-03-13 14:07 ` Dietmar Eggemann
2014-03-17 11:52 ` Peter Zijlstra
2014-03-19 19:15 ` Dietmar Eggemann
2014-03-20 8:28 ` Vincent Guittot
2014-03-11 13:08 ` Peter Zijlstra
[not found] ` <1394003906-11630-5-git-send-email-vincent.guittot@linaro.org>
2014-03-11 10:08 ` Preeti U Murthy [this message]
2014-03-11 13:18 ` [RFC 4/6] sched: powerpc: create a dedicated topology table Vincent Guittot
2014-03-12 4:42 ` Preeti U Murthy
2014-03-12 7:44 ` Vincent Guittot
2014-03-12 11:04 ` Dietmar Eggemann
2014-03-14 2:30 ` Preeti U Murthy
2014-03-14 2:14 ` Preeti U Murthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=531EE087.7050707@linux.vnet.ibm.com \
--to=preeti@linux.vnet.ibm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).