From: b.brezillon.dev@gmail.com (Boris BREZILLON)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv5 0/9] Device tree support for the at91sam9rlek
Date: Wed, 12 Mar 2014 11:21:31 +0100 [thread overview]
Message-ID: <5320352B.7040707@gmail.com> (raw)
In-Reply-To: <5320334C.7060206@atmel.com>
Le 12/03/2014 11:13, Nicolas Ferre a ?crit :
> On 12/03/2014 10:43, Alexandre Belloni :
>> This series adds DT support for the at91sam9rl SoC, then the at91sam9rl-ek
>> evaluation board.
>>
>> While the at91sam9rl dtsi should be almost complete (still missing LCD and
>> touchscreen bits). The at91sam9rlek DT now support the following tested
>> features:
>> - MMC
>> - dbgu
>> - usart1
>> - watchdog
>> - nand
>> - leds
>> - buttons
>> - common clock framework
>>
>> Next:
>> - spi
>> - dataflash
>> - i2c
>> - lcd
>> - touchscreen
>> - usb gadget
>> - audio
>>
>> Changes since v4:
>> - correct a typo in the pwm clock name
>> - add an entry for the pwm clock in the board file lookup table
>> - reorder pinctrl nodes alphabetically
>>
>> Changes since v3:
>> - reordered nand
>> - removed ADC and USB gadget definition as they were not working. They will
>> come with another set of patches adding proper support.
>>
>> Alexandre Belloni (8):
>> ARM: at91: prepare at91sam9rl DT transition
>> ARM: at91: Add at91sam9rl DT SoC support
>> ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
>> ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
>> ARM: at91: prepare common clk transition for sam9rl SoCs
>> ARM: at91/dt: define at91sam9rl clocks
>> ARM: at91/dt: define main clk frequency of at91sam9rlek
>> ARM: at91: switch sam9rl to common clock framework
>>
>> Boris BREZILLON (1):
>> ARM: at91: prepare sam9 dt boards transition to common clk
> The series seems ready for inclusion. I stack the whole series on our
> at91-3.15-cleanup branch with my:
>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
You can add my
Acked-by: Boris BREZILLON <b.brezillon.dev@gmail>
Thanks.
Best Regards,
Boris
>
> Thanks a lot.
>
>
>> arch/arm/boot/dts/Makefile | 2 +
>> arch/arm/boot/dts/at91sam9rl.dtsi | 802 +++++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/at91sam9rlek.dts | 157 ++++++++
>> arch/arm/configs/at91_dt_defconfig | 1 +
>> arch/arm/mach-at91/Kconfig | 1 -
>> arch/arm/mach-at91/at91sam9rl.c | 23 +-
>> arch/arm/mach-at91/board-dt-sam9.c | 11 +-
>> 7 files changed, 994 insertions(+), 3 deletions(-)
>> create mode 100644 arch/arm/boot/dts/at91sam9rl.dtsi
>> create mode 100644 arch/arm/boot/dts/at91sam9rlek.dts
>>
>
next prev parent reply other threads:[~2014-03-12 10:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-12 9:43 [PATCHv5 0/9] Device tree support for the at91sam9rlek Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 1/9] ARM: at91: prepare at91sam9rl DT transition Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 2/9] ARM: at91: Add at91sam9rl DT SoC support Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 3/9] ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 4/9] ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 5/9] ARM: at91: prepare sam9 dt boards transition to common clk Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 6/9] ARM: at91: prepare common clk transition for sam9rl SoCs Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 7/9] ARM: at91/dt: define at91sam9rl clocks Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 8/9] ARM: at91/dt: define main clk frequency of at91sam9rlek Alexandre Belloni
2014-03-12 9:43 ` [PATCHv5 9/9] ARM: at91: switch sam9rl to common clock framework Alexandre Belloni
2014-03-12 10:13 ` [PATCHv5 0/9] Device tree support for the at91sam9rlek Nicolas Ferre
2014-03-12 10:21 ` Boris BREZILLON [this message]
2014-03-12 10:22 ` Boris BREZILLON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5320352B.7040707@gmail.com \
--to=b.brezillon.dev@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).