[PATCH 0/4] ata: add remaining new-style AHCI platform drivers

[hdegoede@redhat.com (Hans de Goede)]

Hi,

On 03/17/2014 07:31 PM, Bartlomiej Zolnierkiewicz wrote:
> Hi,
> 
> This patch series adds new-style AHCI platform drivers for DaVinci DA850
> AHCI controller and ST SPEAr1340 AHCI controller.  As a preparation for
> adding these drivers it also fixes ahci_platform_data->suspend() handling
> (patch #1) and moves library AHCI platform code to its own file (patch #2).
> The new AHCI platform drivers are only compile tested (they are marked as
> experimental because of this) and I would ask somebody with the hardware
> to verify them (thanks!).

Thanks for working on this.

Patches 1/2 seem sensible to me, and 3/4 are obviously a good idea. Also
all patches look good to me, so this series is:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans

> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
> 
> Bartlomiej Zolnierkiewicz (4):
>   ata: ahci_platform: fix ahci_platform_data->suspend method handling
>   ata: move library code from ahci_platform.c to libahci_platform.c
>   ata: add new-style AHCI platform driver for DaVinci DA850 AHCI
>     controller
>   ata: add new-style AHCI platform driver for ST SPEAr1340 AHCI
>     controller
> 
>  drivers/ata/Kconfig            |  23 +-
>  drivers/ata/Makefile           |  10 +-
>  drivers/ata/ahci_da850.c       | 178 ++++++++++++++
>  drivers/ata/ahci_platform.c    | 508 --------------------------------------
>  drivers/ata/ahci_spear1340.c   | 222 +++++++++++++++++
>  drivers/ata/libahci_platform.c | 541 +++++++++++++++++++++++++++++++++++++++++
>  6 files changed, 967 insertions(+), 515 deletions(-)
>  create mode 100644 drivers/ata/ahci_da850.c
>  create mode 100644 drivers/ata/ahci_spear1340.c
>  create mode 100644 drivers/ata/libahci_platform.c
>