From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: clps711x: Add cpuidle driver
Date: Mon, 24 Mar 2014 16:34:44 +0100 [thread overview]
Message-ID: <53305094.8010008@linaro.org> (raw)
In-Reply-To: <1395467076-29462-1-git-send-email-shc_work@mail.ru>
On 03/22/2014 06:44 AM, Alexander Shiyan wrote:
> Add cpuidle support for ARM Cirrus Logic CLPS711X CPUs.
> This CPU has an unique internal register and write to this location
> will put the system into the Idle State by halting the clock to the
> processor until an interrupt is generated.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> drivers/cpuidle/Kconfig.arm | 6 ++++
> drivers/cpuidle/Makefile | 1 +
> drivers/cpuidle/cpuidle-clps711x.c | 64 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 71 insertions(+)
> create mode 100644 drivers/cpuidle/cpuidle-clps711x.c
>
> diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
> index 97ccc31..371e75d 100644
> --- a/drivers/cpuidle/Kconfig.arm
> +++ b/drivers/cpuidle/Kconfig.arm
> @@ -13,6 +13,12 @@ config ARM_BIG_LITTLE_CPUIDLE
> define different C-states for little and big cores through the
> multiple CPU idle drivers infrastructure.
>
> +config ARM_CLPS711X_CPUIDLE
> + bool "CPU Idle Driver for CLPS711X processors"
> + depends on ARCH_CLPS711X || COMPILE_TEST
> + help
> + Select this to enable cpuidle on Cirrus Logic CLPS711X SOCs.
> +
> config ARM_HIGHBANK_CPUIDLE
> bool "CPU Idle Driver for Calxeda processors"
> depends on ARM_PSCI
> diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> index f71ae1b..534fff5 100644
> --- a/drivers/cpuidle/Makefile
> +++ b/drivers/cpuidle/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
> ##################################################################################
> # ARM SoC drivers
> obj-$(CONFIG_ARM_BIG_LITTLE_CPUIDLE) += cpuidle-big_little.o
> +obj-$(CONFIG_ARM_CLPS711X_CPUIDLE) += cpuidle-clps711x.o
> obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE) += cpuidle-calxeda.o
> obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o
> obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o
> diff --git a/drivers/cpuidle/cpuidle-clps711x.c b/drivers/cpuidle/cpuidle-clps711x.c
> new file mode 100644
> index 0000000..5243811
> --- /dev/null
> +++ b/drivers/cpuidle/cpuidle-clps711x.c
> @@ -0,0 +1,64 @@
> +/*
> + * CLPS711X CPU idle driver
> + *
> + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/cpuidle.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#define CLPS711X_CPUIDLE_NAME "clps711x-cpuidle"
> +
> +static void __iomem *clps711x_halt;
> +
> +static int clps711x_cpuidle_halt(struct cpuidle_device *dev,
> + struct cpuidle_driver *drv, int index)
> +{
> + writel(0xaa, clps711x_halt);
> +
> + return index;
> +}
> +
> +static struct cpuidle_driver clps711x_idle_driver = {
> + .name = CLPS711X_CPUIDLE_NAME,
> + .owner = THIS_MODULE,
> + .states[0] = {
> + .name = "HALT",
> + .desc = "CLPS711X HALT",
> + .enter = clps711x_cpuidle_halt,
> + .exit_latency = 1,
Did you forget target_residency ? Or just not defined it as it is 0 ?
> + },
> + .state_count = 1,
> +};
> +
> +static int __init clps711x_cpuidle_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + clps711x_halt = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(clps711x_halt))
> + return PTR_ERR(clps711x_halt);
> +
> + return cpuidle_register(&clps711x_idle_driver, NULL);
> +}
> +
> +static struct platform_driver clps711x_cpuidle_driver = {
> + .driver = {
> + .name = CLPS711X_CPUIDLE_NAME,
> + .owner = THIS_MODULE,
> + },
> +};
> +module_platform_driver_probe(clps711x_cpuidle_driver, clps711x_cpuidle_probe);
> +
> +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
> +MODULE_DESCRIPTION("CLPS711X CPU idle driver");
> +MODULE_LICENSE("GPL");
>
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2014-03-24 15:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-22 5:44 [PATCH 1/2] ARM: clps711x: Add cpuidle driver Alexander Shiyan
2014-03-22 5:44 ` [PATCH 2/2] ARM: clps711x: Switch CLPS711X subarch to use " Alexander Shiyan
2014-03-26 11:03 ` Daniel Lezcano
2014-03-26 11:09 ` Alexander Shiyan
2014-03-26 11:23 ` Daniel Lezcano
2014-03-24 15:34 ` Daniel Lezcano [this message]
2014-03-24 16:44 ` [PATCH 1/2] ARM: clps711x: Add " Alexander Shiyan
2014-03-24 17:15 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53305094.8010008@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).