[PATCH V2 17/17] ARM: exynos: config: Enable cpuidle

[daniel.lezcano@linaro.org (Daniel Lezcano)]

On 04/04/2014 06:09 PM, Bartlomiej Zolnierkiewicz wrote:
>
> On Friday, April 04, 2014 03:43:09 PM Daniel Lezcano wrote:
>> The cpuidle driver is broken since v3.11 and now we are at v3.14.
>>
>> Default the cpuidle driver to favorize a better detection next time.
>>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
>> ---
>>   arch/arm/configs/exynos_defconfig |    1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
>> index 4ce7b70..6ed4b34 100644
>> --- a/arch/arm/configs/exynos_defconfig
>> +++ b/arch/arm/configs/exynos_defconfig
>> @@ -132,3 +132,4 @@ CONFIG_DEBUG_INFO=y
>>   CONFIG_DEBUG_USER=y
>>   CONFIG_CRYPTO_SHA256=y
>>   CONFIG_CRC_CCITT=y
>> +CONFIG_CPU_IDLE=y
>
> Sorry but I have to NAK this change.  There are three issues with AFTR
> mode that should be resolved first before this patch can be merged:
>
> * The upstream Exynos cpuidle code lacks support for secure firmware and
>    it is used on i.e. Trats2 boards (Exynos4412).  Attempts to use AFTR on
>    such hardware results in oops + lockup.
>    I have patches adding secure firmware support to Exynos cpuidle driver
>    but they depend on Tomasz Figa's PM changes which are not yet upstream.

Ok.

> * Somebody needs to verify that the current Exynos cpuidle driver works
>    in the AFTR mode on Exynos5420 for which support has been added recently
>    (I really doubt it looking at some internal trees).

Rajeshwari (cc'ed) is working on creating a big.Little driver for this 
board, so it will be a separate cpuidle driver.

> * Some of our u-boot bootloader versions are incompatible with AFTR.  We
>    have observed the problem happening on Trats board (Exynos4210) on which
>    it can be fixed by using the upstream u-boot version and Universal C210
>    board (Exynos4210 with broken SMP support) on which there is no upstream
>    u-boot available (IIRC) and because of the broken SMP support enabling
>    cpuidle results in attempt to enter AFTR during boot + immediate lockup.
>
>    I know that this is mainly our problem but the issue is widespread on
>    our targets and I believe that adding some workaround for it in cpuidle
>    core would be beneficial for the whole cpuidle subsystem.  Namely there
>    should be some way of telling cpuidle subsystem to either disable
>    particular state(s) or limit the max available state.  I think that this
>    can be also useful for testing and development of other cpuidle drivers.
>
> For now please change this patch to add CONFIG_CPU_IDLE=n instead (since
> the config option is "default y" it will be auto-enabled if there is no
> entry in the defconfig)..

Ok.

Kukjin, is it possible you merge patches 1->16 ?

Thanks

   -- Daniel

> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
>


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog