From mboxrd@z Thu Jan  1 00:00:00 1970
From: slongerbeam@gmail.com (Steve Longerbeam)
Date: Thu, 16 Feb 2017 11:20:00 -0800
Subject: [PATCH v4 01/36] [media] dt-bindings: Add bindings for i.MX media
 driver
In-Reply-To: <1487246051.2377.41.camel@pengutronix.de>
References: <1487211578-11360-1-git-send-email-steve_longerbeam@mentor.com>
 <1487211578-11360-2-git-send-email-steve_longerbeam@mentor.com>
 <1487246051.2377.41.camel@pengutronix.de>
Message-ID: <5349304b-1994-f207-e1bc-974999d1acfd@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org



On 02/16/2017 03:54 AM, Philipp Zabel wrote:
> On Wed, 2017-02-15 at 18:19 -0800, Steve Longerbeam wrote:
>> Add bindings documentation for the i.MX media driver.
>>
>> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
>> ---
>>  Documentation/devicetree/bindings/media/imx.txt | 66 +++++++++++++++++++++++++
>>  1 file changed, 66 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/imx.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/imx.txt b/Documentation/devicetree/bindings/media/imx.txt
>> new file mode 100644
>> index 0000000..fd5af50
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/imx.txt
>> @@ -0,0 +1,66 @@
>> +Freescale i.MX Media Video Device
>> +=================================
>> +
>> +Video Media Controller node
>> +---------------------------
>> +
>> +This is the media controller node for video capture support. It is a
>> +virtual device that lists the camera serial interface nodes that the
>> +media device will control.
>> +
>> +Required properties:
>> +- compatible : "fsl,imx-capture-subsystem";
>> +- ports      : Should contain a list of phandles pointing to camera
>> +		sensor interface ports of IPU devices
>> +
>> +example:
>> +
>> +capture-subsystem {
>> +	compatible = "fsl,capture-subsystem";
>
> "fsl,imx-capture-subsystem"


Fixed.

Steve