[PATCH V5 00/20] ARM: exynos: cpuidle: Move the driver to drivers/cpuidle

[daniel.lezcano@linaro.org (Daniel Lezcano)]

Hi Kukjin,

I believe I addressed all the comments. Is it possible to take this 
patchset for next ?

Regards

   -- Daniel



On 04/11/2014 12:39 PM, Daniel Lezcano wrote:
> Changelog:
>
> V5:
> 	* Removed patch : "Move clock setup to pm.c"
> 	* Added patch   : "Move arm core power down clock to exynos5250 common code"
> V4:
> 	* Took into account Tomasz's comments
> 		* Fixed missing call in for central suspend
> 		* Passed parameter to the wakeup mask function
> 		* Moved wakeup mask, boot vector and aftr state into a single
> 		function
> 		* Used this function as callback for platform data
> 		* Moved S5P_CHECK_AFTR/S5P_CHECK_SLEEP into pm.c
> 		* Set boot vector only one time
> 	* Splitted some patches to make them more readable
> V3:
> 	* Added patch   : "ARM: exynos: cpuidle: Disable cpuidle for 5440"
> 	* Removed patch : "ARM: exynos: config: Enable cpuidle"
> 	* Removed default ARM_EXYNOS4210_CPUIDLE=y
> 	* Added comment about bug fix side effect 'for_each_possible_cpu'
> V2:
> 	* Added comment in changelog for calls order (5/17)
> 	* Call the powerdown only for cpu0 in the pm notifier
> 	* Set the pm notifier for all boards
>
> V1: initial post
>
> This patchset relies on the cpm_pm notifier to initiate the powerdown sequence
> operations from pm.c instead cpuidle.c. Thus the cpuidle driver is no longer
> dependent from arch specific code as everything is called from the pm.c file.
>
> The patchset applies on top of linux-samsung/for-next.
>
> Tested on exynos4: 4210
> Tested on exynos5: 5250 (without AFTR)
>
> Amit Daniel Kachhap (1):
>    ARM: EXYNOS: Move arm core power down clock to exynos5250 common
>      clock
>
> Daniel Lezcano (19):
>    ARM: exynos: cpuidle: Prevent forward declaration
>    ARM: exynos: cpuidle: Use cpuidle_register
>    ARM: exynos: cpuidle: Change function name prefix
>    ARM: exynos: cpuidle: Encapsulate register access inside a function
>    ARM: exynos: cpuidle: Move some code inside the idle_finisher
>    ARM: exynos: cpuidle: Fix S5P_WAKEUP_STAT call
>    ARM: exynos: cpuidle: Use the cpu_pm notifier
>    ARM: exynos: cpuidle: Move scu_enable in the cpu_pm notifier
>    ARM: exynos: cpuidle: Remove ifdef for scu_enable
>    ARM: exynos: cpuidle: Pass wakeup mask parameter to function
>    ARM: exynos: cpuidle: Encapsulate boot vector code into a function
>    ARM: exynos: cpuidle: Disable cpuidle for 5440
>    ARM: exynos: cpuidle: Encapsulate the AFTR code into a function
>    ARM: exynos: cpuidle: Move the AFTR state function into pm.c
>    ARM: exynos: cpuidle: Move the power sequence call in the cpu_pm
>      notifier
>    ARM: exynos: cpuidle: Move S5P_CHECK_SLEEP into pm.c
>    ARM: exynos: cpuidle: Pass the AFTR callback to the platform_data
>    ARM: exynos: cpuidle: Cleanup all unneeded headers from cpuidle.c
>    ARM: exynos: cpuidle: Move the driver to drivers/cpuidle directory
>
>   arch/arm/mach-exynos/Makefile        |    1 -
>   arch/arm/mach-exynos/common.h        |    1 +
>   arch/arm/mach-exynos/cpuidle.c       |  255 ----------------------------------
>   arch/arm/mach-exynos/exynos.c        |    8 +-
>   arch/arm/mach-exynos/pm.c            |  152 ++++++++++++++++----
>   arch/arm/mach-exynos/regs-pmu.h      |    2 -
>   drivers/clk/samsung/clk-exynos5250.c |   42 ++++++
>   drivers/cpuidle/Kconfig.arm          |    6 +
>   drivers/cpuidle/Makefile             |    1 +
>   drivers/cpuidle/cpuidle-exynos.c     |   98 +++++++++++++
>   10 files changed, 277 insertions(+), 289 deletions(-)
>   delete mode 100644 arch/arm/mach-exynos/cpuidle.c
>   create mode 100644 drivers/cpuidle/cpuidle-exynos.c
>


-- 
  <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog