From mboxrd@z Thu Jan  1 00:00:00 1970
From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
Date: Tue, 22 Apr 2014 19:22:42 +0200
Subject: [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q
In-Reply-To: <20140422182802.447c2912@skate>
References: <1398181105-19714-1-git-send-email-antoine.tenart@free-electrons.com>
 <1398181105-19714-4-git-send-email-antoine.tenart@free-electrons.com>
 <20140422182802.447c2912@skate>
Message-ID: <5356A562.2090403@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 04/22/2014 06:28 PM, Thomas Petazzoni wrote:
> Dear Antoine T?nart,
> 
> On Tue, 22 Apr 2014 17:38:22 +0200, Antoine T?nart wrote:
>> The BG2Q has an AHCI SATA controller. Add the corresponding node
>> in its device tree.
> 
> I believe the commit log should explain why an apparently unrelated
> generic-regs@ node gets added in this commit.

generic-regs@ is from another patch, please drop it entirely.

Sebastian

>> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
>> index 07452a7483fa..8e58aae73365 100644
>> --- a/arch/arm/boot/dts/berlin2q.dtsi
>> +++ b/arch/arm/boot/dts/berlin2q.dtsi
>> @@ -183,6 +183,18 @@
>>  			};
>>  		};
>>  
>> +		ahci: sata at e90000 {
>> +			compatible = "marvell,berlin-ahci";
>> +			reg = <0xe90000 0x10000>;
>> +			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +			status = "disable";
>> +		};
>> +
>> +		generic-regs at ea0110 {
>> +			compatible = "marvell,berlin-generic-regs", "syscon";
>> +			reg = <0xea0110 0x10>;
>> +		};
>> +
>>  		apb at fc0000 {
>>  			compatible = "simple-bus";
>>  			#address-cells = <1>;
> 
> 
>