From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 14/38] ARM: orion5x: add node labels in Orion5x SoC Device Tree file
Date: Wed, 23 Apr 2014 13:22:25 +0200 [thread overview]
Message-ID: <5357A271.9050603@gmail.com> (raw)
In-Reply-To: <1398202002-28530-15-git-send-email-thomas.petazzoni@free-electrons.com>
On 04/22/2014 11:26 PM, Thomas Petazzoni wrote:
> In order to ease identification of devices, it is useful to have
> Device Tree labels on all devices. This commit adds such labels to the
> Orion5x SoC Device Tree file.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Oh, nice one :)
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> ---
> arch/arm/boot/dts/orion5x.dtsi | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
> index 31d46e6..aef5d17 100644
> --- a/arch/arm/boot/dts/orion5x.dtsi
> +++ b/arch/arm/boot/dts/orion5x.dtsi
> @@ -41,7 +41,7 @@
> interrupts = <6>, <7>, <8>, <9>;
> };
>
> - spi at 10600 {
> + spi: spi at 10600 {
> compatible = "marvell,orion-spi";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -50,7 +50,7 @@
> status = "disabled";
> };
>
> - i2c at 11000 {
> + i2c: i2c at 11000 {
> compatible = "marvell,mv64xxx-i2c";
> reg = <0x11000 0x20>;
> #address-cells = <1>;
> @@ -60,7 +60,7 @@
> status = "disabled";
> };
>
> - serial at 12000 {
> + uart0: serial at 12000 {
> compatible = "ns16550a";
> reg = <0x12000 0x100>;
> reg-shift = <2>;
> @@ -69,7 +69,7 @@
> status = "disabled";
> };
>
> - serial at 12100 {
> + uart1: serial at 12100 {
> compatible = "ns16550a";
> reg = <0x12100 0x100>;
> reg-shift = <2>;
> @@ -85,20 +85,20 @@
> reg = <0x20200 0x08>;
> };
>
> - wdt at 20300 {
> + wdt: wdt at 20300 {
> compatible = "marvell,orion-wdt";
> reg = <0x20300 0x28>;
> status = "okay";
> };
>
> - ehci at 50000 {
> + ehci0: ehci at 50000 {
> compatible = "marvell,orion-ehci";
> reg = <0x50000 0x1000>;
> interrupts = <17>;
> status = "disabled";
> };
>
> - xor at 60900 {
> + xor: xor at 60900 {
> compatible = "marvell,orion-xor";
> reg = <0x60900 0x100
> 0x60b00 0x100>;
> @@ -125,7 +125,7 @@
> marvell,tx-checksum-limit = <1600>;
> status = "disabled";
>
> - ethernet-port at 0 {
> + ethport: ethernet-port at 0 {
> compatible = "marvell,orion-eth-port";
> reg = <0>;
> /* overwrite MAC address in bootloader */
> @@ -145,14 +145,14 @@
> /* add phy nodes in board file */
> };
>
> - sata at 80000 {
> + sata: sata at 80000 {
> compatible = "marvell,orion-sata";
> reg = <0x80000 0x5000>;
> interrupts = <29>;
> status = "disabled";
> };
>
> - ehci at a0000 {
> + ehci1: ehci at a0000 {
> compatible = "marvell,orion-ehci";
> reg = <0xa0000 0x1000>;
> interrupts = <12>;
> @@ -160,7 +160,7 @@
> };
> };
>
> - crypto at 90000 {
> + cesa: crypto at 90000 {
> compatible = "marvell,orion-crypto";
> reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
> <MBUS_ID(0x09, 0x00) 0x0 0x800>;
>
next prev parent reply other threads:[~2014-04-23 11:22 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-22 21:26 [PATCH v2 00/38] ARM: orion5x: big step towards DT conversion Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 01/38] ARM: orion5x: fix target ID for crypto SRAM window Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 02/38] memory: mvebu-devbus: fix the conversion of the bus width Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 03/38] pinctrl: mvebu: new driver for Orion platforms Thomas Petazzoni
2014-04-23 11:16 ` Sebastian Hesselbarth
2014-04-23 14:17 ` Linus Walleij
2014-04-23 14:18 ` Thomas Petazzoni
2014-04-24 2:37 ` Jason Cooper
2014-04-24 13:10 ` Linus Walleij
2014-04-22 21:26 ` [PATCH v2 04/38] clk: mvebu: add Orion5x clock driver Thomas Petazzoni
2014-04-23 11:16 ` Sebastian Hesselbarth
2014-04-26 1:11 ` Jason Cooper
2014-04-22 21:26 ` [PATCH v2 05/38] memory: mvebu-devbus: use ARMADA_ prefix in defines Thomas Petazzoni
2014-04-23 11:17 ` Sebastian Hesselbarth
2014-04-26 14:21 ` Jason Cooper
2014-04-28 13:19 ` Ezequiel Garcia
2014-04-28 14:56 ` Jason Cooper
2014-04-28 16:04 ` Ezequiel Garcia
2014-04-29 13:19 ` Jason Cooper
2014-04-22 21:26 ` [PATCH v2 06/38] memory: mvebu-devbus: use _SHIFT suffixes instead of _BIT Thomas Petazzoni
2014-04-23 11:17 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 07/38] memory: mvebu-devbus: split functions Thomas Petazzoni
2014-04-23 11:18 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 08/38] memory: mvebu-devbus: add Orion5x support Thomas Petazzoni
2014-04-23 11:18 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 09/38] memory: mvebu-devbus: add a devbus, keep-config property Thomas Petazzoni
2014-04-23 11:18 ` [PATCH v2 09/38] memory: mvebu-devbus: add a devbus,keep-config property Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 10/38] ARM: orion5x: move interrupt controller node into ocp Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 11/38] ARM: orion5x: switch to preprocessor includes in DT Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 12/38] ARM: orion5x: use existing dt-bindings include for Device Tree files Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 13/38] ARM: orion5x: convert DT to use the mvebu-mbus driver Thomas Petazzoni
2014-04-23 11:22 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 14/38] ARM: orion5x: add node labels in Orion5x SoC Device Tree file Thomas Petazzoni
2014-04-23 11:22 ` Sebastian Hesselbarth [this message]
2014-04-22 21:26 ` [PATCH v2 15/38] ARM: orion5x: use gpio-keys and gpio-leds instead of gpio_keys/gpio_leds in edmini_v2 Thomas Petazzoni
2014-04-23 11:22 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 16/38] ARM: orion5x: add linux,stdout-path to edmini_v2 Thomas Petazzoni
2014-04-23 11:22 ` [PATCH v2 16/38] ARM: orion5x: add linux, stdout-path " Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 17/38] ARM: orion5x: use node labels for UART and SATA on edmini_v2 Thomas Petazzoni
2014-04-23 11:23 ` Sebastian Hesselbarth
2014-04-23 12:23 ` Thomas Petazzoni
2014-04-23 12:46 ` Ezequiel Garcia
2014-04-23 12:48 ` Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 18/38] ARM: orion5x: rename XOR node to dma-controller@<address> Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 19/38] ARM: orion5x: add interrupt for Ethernet in Device Tree Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 20/38] ARM: orion5x: switch to use the clock driver for DT platforms Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 21/38] ARM: orion5x: convert to use 'clocks' property for UART controllers Thomas Petazzoni
2014-04-23 11:24 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 22/38] ARM: orion: switch to a per-platform handle_irq() function Thomas Petazzoni
2014-04-22 21:45 ` Arnd Bergmann
2014-04-22 21:53 ` Thomas Petazzoni
2014-04-23 10:30 ` Arnd Bergmann
2014-04-23 11:25 ` Sebastian Hesselbarth
2014-04-26 14:54 ` Jason Cooper
2014-04-26 15:00 ` Jason Cooper
2014-04-26 15:42 ` Sebastian Hesselbarth
2014-04-26 20:33 ` Jason Cooper
2014-04-29 14:52 ` Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 23/38] ARM: orion5x: switch to DT interrupts and timer Thomas Petazzoni
2014-04-23 11:26 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 24/38] ARM: orion5x: enable pinctrl driver at SoC level Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 25/38] ARM: orion5x: update I2C description " Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 26/38] ARM: orion5x: add Device Bus " Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 27/38] ARM: orion5x: add standard pinctrl configs for sata0 and sata1 Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 28/38] ARM: orion5x: convert edmini_v2 to DT pinctrl Thomas Petazzoni
2014-04-23 11:27 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 29/38] ARM: orion5x: use DT to describe I2C devices on edmini_v2 Thomas Petazzoni
2014-04-23 11:28 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 30/38] ARM: orion5x: use DT to describe EHCI " Thomas Petazzoni
2014-04-23 11:28 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 31/38] ARM: orion5x: use DT to describe NOR " Thomas Petazzoni
2014-04-23 11:29 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 32/38] ARM: orion5x: keep TODO list in edmini_v2 DT Thomas Petazzoni
2014-04-23 11:29 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 33/38] ARM: orion5x: remove unneeded code for edmini_v2 Thomas Petazzoni
2014-04-22 21:26 ` [PATCH v2 34/38] ARM: orion5x: convert RD-88F5182 to Device Tree Thomas Petazzoni
2014-04-23 11:30 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 35/38] ARM: orion5x: convert d2net " Thomas Petazzoni
2014-04-23 11:32 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 36/38] ARM: orion5x: convert Maxtor Shared Storage II to the " Thomas Petazzoni
2014-04-23 11:33 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 37/38] ARM: orion: remove no longer needed DT IRQ code Thomas Petazzoni
2014-04-23 11:33 ` Sebastian Hesselbarth
2014-04-22 21:26 ` [PATCH v2 38/38] ARM: orion: remove no longer needed gpio DT code Thomas Petazzoni
2014-04-23 11:34 ` Sebastian Hesselbarth
2014-04-23 11:35 ` [PATCH v2 00/38] ARM: orion5x: big step towards DT conversion Sebastian Hesselbarth
2014-04-23 12:24 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5357A271.9050603@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).