[PATCH 0/5] Berlin: add clock support

[PATCH 0/5] Berlin: add clock support

[Alexandre Belloni]

This patch set adds support for the clocks having their own register set. Other
clocks are available but they are sharing a common register in addition of their
own registers. They will be supported in a following series.

Also, I realized that when moving the pll nodes out of the clocks container,
they didn't get reorder.

Alexandre Belloni (5):
  clk: berlin: add support for clocks
  clk: berlin: add berlin clocks DT bindings documentation
  ARM: berlin/dt: add sdio clocks to BG2
  ARM: berlin/dt: add sdio clocks to BG2CD
  ARM: berlin/dt: add sdio clocks to BG2Q

 .../devicetree/bindings/clock/berlin-clock.txt     |   9 +-
 arch/arm/boot/dts/berlin2.dtsi                     |  42 ++++---
 arch/arm/boot/dts/berlin2cd.dtsi                   |  42 ++++---
 arch/arm/boot/dts/berlin2q.dtsi                    |  28 +++--
 drivers/clk/berlin/Makefile                        |   2 +-
 drivers/clk/berlin/clk.c                           | 132 +++++++++++++++++++++
 6 files changed, 218 insertions(+), 37 deletions(-)
 create mode 100644 drivers/clk/berlin/clk.c

-- 
1.9.1

[PATCH 1/5] clk: berlin: add support for clocks

[Alexandre Belloni]

Add support for clocks having their own register set.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/clk/berlin/Makefile |   2 +-
 drivers/clk/berlin/clk.c    | 132 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 133 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/berlin/clk.c

diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
index 94859513de90..9bfa58eaf25a 100644
--- a/drivers/clk/berlin/Makefile
+++ b/drivers/clk/berlin/Makefile
@@ -1,4 +1,4 @@
-obj-y += pll.o
+obj-y += pll.o clk.o
 obj-$(CONFIG_MACH_BERLIN_BG2)   += pll-berlin2.o
 obj-$(CONFIG_MACH_BERLIN_BG2CD) += pll-berlin2.o
 obj-$(CONFIG_MACH_BERLIN_BG2Q)  += pll-berlin2q.o
diff --git a/drivers/clk/berlin/clk.c b/drivers/clk/berlin/clk.c
new file mode 100644
index 000000000000..a0e688e5bead
--- /dev/null
+++ b/drivers/clk/berlin/clk.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+#define CLKEN		(1 << 0)
+#define CLKPLLSEL_MASK	7
+#define CLKPLLSEL_SHIFT	1
+#define CLKPLLSWITCH	(1 << 4)
+#define CLKSWITCH	(1 << 5)
+#define CLKD3SWITCH	(1 << 6)
+#define CLKSEL_MASK	7
+#define CLKSEL_SHIFT	7
+
+struct berlin_clk {
+	struct clk_hw hw;
+	void __iomem *base;
+};
+
+#define to_berlin_clk(hw)	container_of(hw, struct berlin_clk, hw)
+
+static u8 clk_div[] = {1, 2, 4, 6, 8, 12, 1, 1};
+
+static unsigned long berlin_clk_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	u32 val, divider;
+	struct berlin_clk *clk = to_berlin_clk(hw);
+
+	val = readl_relaxed(clk->base);
+	if (val & CLKD3SWITCH)
+		divider = 3;
+	else {
+		if (val & CLKSWITCH) {
+			val >>= CLKSEL_SHIFT;
+			val &= CLKSEL_MASK;
+			divider = clk_div[val];
+		} else
+			divider = 1;
+	}
+
+	return parent_rate / divider;
+}
+
+static u8 berlin_clk_get_parent(struct clk_hw *hw)
+{
+	u32 val;
+	struct berlin_clk *clk = to_berlin_clk(hw);
+
+	val = readl_relaxed(clk->base);
+	if (val & CLKPLLSWITCH) {
+		val >>= CLKPLLSEL_SHIFT;
+		val &= CLKPLLSEL_MASK;
+		return val;
+	}
+
+	return 0;
+}
+
+static const struct clk_ops berlin_clk_ops = {
+	.recalc_rate	= berlin_clk_recalc_rate,
+	.get_parent	= berlin_clk_get_parent,
+};
+
+static void __init berlin_clk_setup(struct device_node *np)
+{
+	struct clk_init_data init;
+	struct berlin_clk *bclk;
+	struct clk *clk;
+	const char **parent_names;
+	int nparents, i, ret;
+
+	bclk = kzalloc(sizeof(*bclk), GFP_KERNEL);
+	if (WARN_ON(!bclk))
+		return;
+
+	bclk->base = of_iomap(np, 0);
+	if (WARN_ON(!bclk->base))
+		goto exit;
+
+	nparents = of_clk_get_parent_count(np);
+	if (WARN_ON(!nparents))
+		goto exit;
+
+	parent_names = kzalloc((sizeof(char *) * nparents), GFP_KERNEL);
+	if (WARN_ON(!parent_names))
+		goto exit;
+
+	init.name = np->name;
+	init.ops = &berlin_clk_ops;
+	for (i = 0; i < nparents; i++) {
+		parent_names[i] = of_clk_get_parent_name(np, i);
+		if (!parent_names[i])
+			break;
+	}
+	init.parent_names = parent_names;
+	init.num_parents = i;
+
+	bclk->hw.init = &init;
+
+	clk = clk_register(NULL, &bclk->hw);
+	kfree(parent_names);
+	if (WARN_ON(IS_ERR(clk)))
+		goto exit;
+
+	ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
+	WARN_ON(ret);
+
+	return;
+exit:
+	kfree(bclk);
+}
+
+CLK_OF_DECLARE(berlin_clk, "marvell,berlin-clk", berlin_clk_setup);
-- 
1.9.1

[PATCH 1/5] clk: berlin: add support for clocks

[Sebastian Hesselbarth]

On 04/23/2014 04:01 PM, Alexandre Belloni wrote:
> Add support for clocks having their own register set.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  drivers/clk/berlin/Makefile |   2 +-
>  drivers/clk/berlin/clk.c    | 132 ++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 133 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/berlin/clk.c
> 
> diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
> index 94859513de90..9bfa58eaf25a 100644
> --- a/drivers/clk/berlin/Makefile
> +++ b/drivers/clk/berlin/Makefile
> @@ -1,4 +1,4 @@
> -obj-y += pll.o
> +obj-y += pll.o clk.o
>  obj-$(CONFIG_MACH_BERLIN_BG2)   += pll-berlin2.o
>  obj-$(CONFIG_MACH_BERLIN_BG2CD) += pll-berlin2.o
>  obj-$(CONFIG_MACH_BERLIN_BG2Q)  += pll-berlin2q.o
> diff --git a/drivers/clk/berlin/clk.c b/drivers/clk/berlin/clk.c
> new file mode 100644
> index 000000000000..a0e688e5bead
> --- /dev/null
> +++ b/drivers/clk/berlin/clk.c
> @@ -0,0 +1,132 @@
> +/*
> + * Copyright (c) 2014 Marvell Technology Group Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/bitops.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +
> +#include "common.h"
> +
> +#define CLKEN		(1 << 0)

Alexandre,

please use BIT(n) instead of (1 << n).

> +#define CLKPLLSEL_MASK	7
> +#define CLKPLLSEL_SHIFT	1
> +#define CLKPLLSWITCH	(1 << 4)
> +#define CLKSWITCH	(1 << 5)
> +#define CLKD3SWITCH	(1 << 6)
> +#define CLKSEL_MASK	7
> +#define CLKSEL_SHIFT	7

In general, I would change the above defines to CLK_SEL_MASK, i.e.
add a _ after CLK. While at it (as it can be seen from the code
below), also rename CLK_D3SWITCH to CLK_DIV3_SWITCH.

> +
> +struct berlin_clk {
> +	struct clk_hw hw;
> +	void __iomem *base;
> +};
> +
> +#define to_berlin_clk(hw)	container_of(hw, struct berlin_clk, hw)
> +
> +static u8 clk_div[] = {1, 2, 4, 6, 8, 12, 1, 1};
> +
> +static unsigned long berlin_clk_recalc_rate(struct clk_hw *hw,
> +					unsigned long parent_rate)
> +{
> +	u32 val, divider;
> +	struct berlin_clk *clk = to_berlin_clk(hw);
> +
> +	val = readl_relaxed(clk->base);
> +	if (val & CLKD3SWITCH)
> +		divider = 3;
> +	else {
> +		if (val & CLKSWITCH) {
> +			val >>= CLKSEL_SHIFT;
> +			val &= CLKSEL_MASK;
> +			divider = clk_div[val];
> +		} else
> +			divider = 1;
> +	}
> +

There are stylistic issues:

if-else with one part being enclosed in {} requires both parts
to be enclosed in those curly brackets, i.e.

if (foo)
	bar;
else {
	foobar;
	barfoo;
}

has to become

if (foo) {
	bar;
} else {
	foobar;
	barfoo;
}

How about writing the above

> +	val = readl_relaxed(clk->base);
> +	if (val & CLKD3SWITCH)
> +		divider = 3;
> +	else {
> +		if (val & CLKSWITCH) {
> +			val >>= CLKSEL_SHIFT;
> +			val &= CLKSEL_MASK;
> +			divider = clk_div[val];
> +		} else
> +			divider = 1;
> +	}


> +	return parent_rate / divider;
> +}
> +
> +static u8 berlin_clk_get_parent(struct clk_hw *hw)
> +{
> +	u32 val;
> +	struct berlin_clk *clk = to_berlin_clk(hw);
> +
> +	val = readl_relaxed(clk->base);
> +	if (val & CLKPLLSWITCH) {
> +		val >>= CLKPLLSEL_SHIFT;
> +		val &= CLKPLLSEL_MASK;
> +		return val;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct clk_ops berlin_clk_ops = {
> +	.recalc_rate	= berlin_clk_recalc_rate,
> +	.get_parent	= berlin_clk_get_parent,
> +};
> +
> +static void __init berlin_clk_setup(struct device_node *np)
> +{
> +	struct clk_init_data init;
> +	struct berlin_clk *bclk;
> +	struct clk *clk;
> +	const char **parent_names;
> +	int nparents, i, ret;
> +
> +	bclk = kzalloc(sizeof(*bclk), GFP_KERNEL);
> +	if (WARN_ON(!bclk))
> +		return;
> +
> +	bclk->base = of_iomap(np, 0);
> +	if (WARN_ON(!bclk->base))
> +		goto exit;
> +
> +	nparents = of_clk_get_parent_count(np);
> +	if (WARN_ON(!nparents))
> +		goto exit;
> +
> +	parent_names = kzalloc((sizeof(char *) * nparents), GFP_KERNEL);
> +	if (WARN_ON(!parent_names))
> +		goto exit;
> +
> +	init.name = np->name;
> +	init.ops = &berlin_clk_ops;
> +	for (i = 0; i < nparents; i++) {
> +		parent_names[i] = of_clk_get_parent_name(np, i);
> +		if (!parent_names[i])
> +			break;
> +	}
> +	init.parent_names = parent_names;
> +	init.num_parents = i;
> +
> +	bclk->hw.init = &init;
> +
> +	clk = clk_register(NULL, &bclk->hw);
> +	kfree(parent_names);
> +	if (WARN_ON(IS_ERR(clk)))
> +		goto exit;
> +
> +	ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
> +	WARN_ON(ret);
> +
> +	return;
> +exit:
> +	kfree(bclk);
> +}
> +
> +CLK_OF_DECLARE(berlin_clk, "marvell,berlin-clk", berlin_clk_setup);
> 

[PATCH 1/5] clk: berlin: add support for clocks

[Sebastian Hesselbarth]

On 04/23/2014 07:03 PM, Sebastian Hesselbarth wrote:
> On 04/23/2014 04:01 PM, Alexandre Belloni wrote:
>> Add support for clocks having their own register set.
>>
>> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
>> ---
>>  drivers/clk/berlin/Makefile |   2 +-
>>  drivers/clk/berlin/clk.c    | 132 ++++++++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 133 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/clk/berlin/clk.c
>>
>> diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
>> index 94859513de90..9bfa58eaf25a 100644
>> --- a/drivers/clk/berlin/Makefile
>> +++ b/drivers/clk/berlin/Makefile
>> @@ -1,4 +1,4 @@
>> -obj-y += pll.o
>> +obj-y += pll.o clk.o
>>  obj-$(CONFIG_MACH_BERLIN_BG2)   += pll-berlin2.o
>>  obj-$(CONFIG_MACH_BERLIN_BG2CD) += pll-berlin2.o
>>  obj-$(CONFIG_MACH_BERLIN_BG2Q)  += pll-berlin2q.o
>> diff --git a/drivers/clk/berlin/clk.c b/drivers/clk/berlin/clk.c
>> new file mode 100644
>> index 000000000000..a0e688e5bead
>> --- /dev/null
>> +++ b/drivers/clk/berlin/clk.c
>> @@ -0,0 +1,132 @@
>> +/*
>> + * Copyright (c) 2014 Marvell Technology Group Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/bitops.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/slab.h>
>> +
>> +#include "common.h"
>> +
>> +#define CLKEN		(1 << 0)
> 
> Alexandre,
> 
> please use BIT(n) instead of (1 << n).
> 
>> +#define CLKPLLSEL_MASK	7
>> +#define CLKPLLSEL_SHIFT	1
>> +#define CLKPLLSWITCH	(1 << 4)
>> +#define CLKSWITCH	(1 << 5)
>> +#define CLKD3SWITCH	(1 << 6)
>> +#define CLKSEL_MASK	7
>> +#define CLKSEL_SHIFT	7
> 
> In general, I would change the above defines to CLK_SEL_MASK, i.e.
> add a _ after CLK. While at it (as it can be seen from the code
> below), also rename CLK_D3SWITCH to CLK_DIV3_SWITCH.
> 
>> +
>> +struct berlin_clk {
>> +	struct clk_hw hw;
>> +	void __iomem *base;
>> +};
>> +
>> +#define to_berlin_clk(hw)	container_of(hw, struct berlin_clk, hw)
>> +
>> +static u8 clk_div[] = {1, 2, 4, 6, 8, 12, 1, 1};
>> +
>> +static unsigned long berlin_clk_recalc_rate(struct clk_hw *hw,
>> +					unsigned long parent_rate)
>> +{
>> +	u32 val, divider;
>> +	struct berlin_clk *clk = to_berlin_clk(hw);
>> +
>> +	val = readl_relaxed(clk->base);
>> +	if (val & CLKD3SWITCH)
>> +		divider = 3;
>> +	else {
>> +		if (val & CLKSWITCH) {
>> +			val >>= CLKSEL_SHIFT;
>> +			val &= CLKSEL_MASK;
>> +			divider = clk_div[val];
>> +		} else
>> +			divider = 1;
>> +	}
>> +
> 
> There are stylistic issues:
> 
> if-else with one part being enclosed in {} requires both parts
> to be enclosed in those curly brackets, i.e.
> 
> if (foo)
> 	bar;
> else {
> 	foobar;
> 	barfoo;
> }
> 
> has to become
> 
> if (foo) {
> 	bar;
> } else {
> 	foobar;
> 	barfoo;
> }
> 
> How about writing the above

Grr, I wasn't done with my review but who the f*ck puts
"Send now" on ^D ?

So, how about writing the above

val = readl_relaxed(clk->base);

divider = 1;
if (val & CLKD3SWITCH) {
	divider = 3;
} else if (val & CLKSWITCH) {
	val >>= CLKSEL_SHIFT;
	val &= CLKSEL_MASK;
	divider = clk_div[val];
}

>> +	return parent_rate / divider;
>> +}
>> +
>> +static u8 berlin_clk_get_parent(struct clk_hw *hw)
>> +{
>> +	u32 val;
>> +	struct berlin_clk *clk = to_berlin_clk(hw);
>> +
>> +	val = readl_relaxed(clk->base);
>> +	if (val & CLKPLLSWITCH) {
>> +		val >>= CLKPLLSEL_SHIFT;
>> +		val &= CLKPLLSEL_MASK;
>> +		return val;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct clk_ops berlin_clk_ops = {
>> +	.recalc_rate	= berlin_clk_recalc_rate,
>> +	.get_parent	= berlin_clk_get_parent,
>> +};
>> +
>> +static void __init berlin_clk_setup(struct device_node *np)
>> +{
>> +	struct clk_init_data init;
>> +	struct berlin_clk *bclk;
>> +	struct clk *clk;
>> +	const char **parent_names;
>> +	int nparents, i, ret;
>> +
>> +	bclk = kzalloc(sizeof(*bclk), GFP_KERNEL);
>> +	if (WARN_ON(!bclk))
>> +		return;
>> +
>> +	bclk->base = of_iomap(np, 0);
>> +	if (WARN_ON(!bclk->base))
>> +		goto exit;
>> +
>> +	nparents = of_clk_get_parent_count(np);
>> +	if (WARN_ON(!nparents))
>> +		goto exit;
>> +
>> +	parent_names = kzalloc((sizeof(char *) * nparents), GFP_KERNEL);

No need to put () around the calculation above. Also, if you put
nparents in front it may be more readable.

Sebastian

>> +	if (WARN_ON(!parent_names))
>> +		goto exit;
>> +
>> +	init.name = np->name;
>> +	init.ops = &berlin_clk_ops;
>> +	for (i = 0; i < nparents; i++) {
>> +		parent_names[i] = of_clk_get_parent_name(np, i);
>> +		if (!parent_names[i])
>> +			break;
>> +	}
>> +	init.parent_names = parent_names;
>> +	init.num_parents = i;
>> +
>> +	bclk->hw.init = &init;
>> +
>> +	clk = clk_register(NULL, &bclk->hw);
>> +	kfree(parent_names);
>> +	if (WARN_ON(IS_ERR(clk)))
>> +		goto exit;
>> +
>> +	ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
>> +	WARN_ON(ret);
>> +
>> +	return;
>> +exit:
>> +	kfree(bclk);
>> +}
>> +
>> +CLK_OF_DECLARE(berlin_clk, "marvell,berlin-clk", berlin_clk_setup);
>>
> 

[PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation

[Alexandre Belloni]

Document the newly added berlin clock driver

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
Cc: devicetree at vger.kernel.org
 Documentation/devicetree/bindings/clock/berlin-clock.txt | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/berlin-clock.txt b/Documentation/devicetree/bindings/clock/berlin-clock.txt
index 49b7860bffb8..00f0053ef587 100644
--- a/Documentation/devicetree/bindings/clock/berlin-clock.txt
+++ b/Documentation/devicetree/bindings/clock/berlin-clock.txt
@@ -9,6 +9,8 @@ Required properties:
 	"marvell,berlin2-pll",
 	"marvell,berlin2q-pll":
 		CPU PLL and System PLL
+	"marvell,berlin2-clk":
+		simple clocks
 - reg: Address and length of the clock register set.
 - #clock-cells: from common clock binding; shall be set to 0.
 - clocks: from common clock binding
@@ -26,4 +28,9 @@ cpupll: cpupll at ea003c {
 	reg = <0xea003c 0x8>;
 };
 
-
+sdio0xinclk: sdio0xinclk at ea023c {
+	compatible = "marvell,berlin-clk";
+	clocks = <&syspll>;
+	#clock-cells = <0>;
+	reg = <0xea023c 4>;
+};
-- 
1.9.1

[PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation

[Sebastian Hesselbarth]

On 04/23/2014 04:01 PM, Alexandre Belloni wrote:
> Document the newly added berlin clock driver
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> Cc: devicetree at vger.kernel.org
>  Documentation/devicetree/bindings/clock/berlin-clock.txt | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/berlin-clock.txt b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> index 49b7860bffb8..00f0053ef587 100644
> --- a/Documentation/devicetree/bindings/clock/berlin-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> @@ -9,6 +9,8 @@ Required properties:
>  	"marvell,berlin2-pll",
>  	"marvell,berlin2q-pll":
>  		CPU PLL and System PLL
> +	"marvell,berlin2-clk":
> +		simple clocks
>  - reg: Address and length of the clock register set.
>  - #clock-cells: from common clock binding; shall be set to 0.
>  - clocks: from common clock binding
> @@ -26,4 +28,9 @@ cpupll: cpupll at ea003c {
>  	reg = <0xea003c 0x8>;
>  };
>  
> -
> +sdio0xinclk: sdio0xinclk at ea023c {

Yuck! ;)

Can't we just simply use "clock@<addr>" for the node name and
have the driver compute the name like simple-bus does?

Sebastian

> +	compatible = "marvell,berlin-clk";
> +	clocks = <&syspll>;
> +	#clock-cells = <0>;
> +	reg = <0xea023c 4>;
> +};
> 

[PATCH 3/5] ARM: berlin/dt: add sdio clocks to BG2

[Alexandre Belloni]

Add sdio clocks to the berlin2.dtsi
Also reorder the PLLs nodes by address

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/boot/dts/berlin2.dtsi | 42 ++++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 6c080eb6242a..707fffd7277d 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -86,20 +86,6 @@
 			clocks = <&twdclk>;
 		};
 
-		syspll: syspll at ea0014 {
-			compatible = "marvell,berlin2-pll";
-			clocks = <&smclk>;
-			#clock-cells = <0>;
-			reg = <0xea0014 8>;
-		};
-
-		cpupll: cpupll at ea003c {
-			compatible = "marvell,berlin2-pll";
-			clocks = <&smclk>;
-			#clock-cells = <0>;
-			reg = <0xea003c 8>;
-		};
-
 		apb at e80000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -190,6 +176,34 @@
 			};
 		};
 
+		syspll: syspll at ea0014 {
+			compatible = "marvell,berlin2-pll";
+			clocks = <&smclk>;
+			#clock-cells = <0>;
+			reg = <0xea0014 8>;
+		};
+
+		cpupll: cpupll at ea003c {
+			compatible = "marvell,berlin2-pll";
+			clocks = <&smclk>;
+			#clock-cells = <0>;
+			reg = <0xea003c 8>;
+		};
+
+		sdio0xinclk: sdio0xinclk at ea023c {
+			compatible = "marvell,berlin-clk";
+			clocks = <&syspll>;
+			#clock-cells = <0>;
+			reg = <0xea023c 4>;
+		};
+
+		sdio1xinclk: sdio1xinclk at ea0240 {
+			compatible = "marvell,berlin-clk";
+			clocks = <&syspll>;
+			#clock-cells = <0>;
+			reg = <0xea0240 4>;
+		};
+
 		apb at fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.9.1

[PATCH 4/5] ARM: berlin/dt: add sdio clocks to BG2CD

[Alexandre Belloni]

Add sdio clocks to the berlin2cd.dtsi
Also reorder the PLLs nodes by address

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/boot/dts/berlin2cd.dtsi | 42 ++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index bd4e9dd4867e..9b3faeee0728 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -79,20 +79,6 @@
 			clocks = <&twdclk>;
 		};
 
-		syspll: syspll at ea0014 {
-			compatible = "marvell,berlin2-pll";
-			clocks = <&smclk>;
-			#clock-cells = <0>;
-			reg = <0xf7ea0014 8>;
-		};
-
-		cpupll: cpupll at ea003c {
-			compatible = "marvell,berlin2-pll";
-			clocks = <&smclk>;
-			#clock-cells = <0>;
-			reg = <0xf7ea003c 8>;
-		};
-
 		apb at e80000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -183,6 +169,34 @@
 			};
 		};
 
+		syspll: syspll at ea0014 {
+			compatible = "marvell,berlin2-pll";
+			clocks = <&smclk>;
+			#clock-cells = <0>;
+			reg = <0xf7ea0014 8>;
+		};
+
+		cpupll: cpupll at ea003c {
+			compatible = "marvell,berlin2-pll";
+			clocks = <&smclk>;
+			#clock-cells = <0>;
+			reg = <0xf7ea003c 8>;
+		};
+
+		sdio0xinclk: sdio0xinclk at ea023c {
+			compatible = "marvell,berlin-clk";
+			clocks = <&syspll>;
+			#clock-cells = <0>;
+			reg = <0xea023c 4>;
+		};
+
+		sdio1xinclk: sdio1xinclk at ea0240 {
+			compatible = "marvell,berlin-clk";
+			clocks = <&syspll>;
+			#clock-cells = <0>;
+			reg = <0xea0240 4>;
+		};
+
 		apb at fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.9.1

[PATCH 4/5] ARM: berlin/dt: add sdio clocks to BG2CD

[Antoine Ténart]

Alexandre,

On Wed, Apr 23, 2014 at 04:01:06PM +0200, Alexandre Belloni wrote:
> Add sdio clocks to the berlin2cd.dtsi
> Also reorder the PLLs nodes by address
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  arch/arm/boot/dts/berlin2cd.dtsi | 42 ++++++++++++++++++++++++++--------------
>  1 file changed, 28 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
> index bd4e9dd4867e..9b3faeee0728 100644
> --- a/arch/arm/boot/dts/berlin2cd.dtsi
> +++ b/arch/arm/boot/dts/berlin2cd.dtsi
> @@ -79,20 +79,6 @@
>  			clocks = <&twdclk>;
>  		};
>  
> -		syspll: syspll at ea0014 {
> -			compatible = "marvell,berlin2-pll";
> -			clocks = <&smclk>;
> -			#clock-cells = <0>;
> -			reg = <0xf7ea0014 8>;
> -		};
> -
> -		cpupll: cpupll at ea003c {
> -			compatible = "marvell,berlin2-pll";
> -			clocks = <&smclk>;
> -			#clock-cells = <0>;
> -			reg = <0xf7ea003c 8>;
> -		};
> -
>  		apb at e80000 {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> @@ -183,6 +169,34 @@
>  			};
>  		};
>  
> +		syspll: syspll at ea0014 {
> +			compatible = "marvell,berlin2-pll";
> +			clocks = <&smclk>;
> +			#clock-cells = <0>;
> +			reg = <0xf7ea0014 8>;

You can drop the 'f7' here

> +		};
> +
> +		cpupll: cpupll at ea003c {
> +			compatible = "marvell,berlin2-pll";
> +			clocks = <&smclk>;
> +			#clock-cells = <0>;
> +			reg = <0xf7ea003c 8>;

and here.

Thanks!

Antoine

> +		};
> +
> +		sdio0xinclk: sdio0xinclk at ea023c {
> +			compatible = "marvell,berlin-clk";
> +			clocks = <&syspll>;
> +			#clock-cells = <0>;
> +			reg = <0xea023c 4>;
> +		};
> +
> +		sdio1xinclk: sdio1xinclk at ea0240 {
> +			compatible = "marvell,berlin-clk";
> +			clocks = <&syspll>;
> +			#clock-cells = <0>;
> +			reg = <0xea0240 4>;
> +		};
> +
>  		apb at fc0000 {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Antoine T?nart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 5/5] ARM: berlin/dt: add sdio clocks to BG2Q

[Alexandre Belloni]

Add sdio clocks to the berlin2q.dtsi
Also reorder the syspll node

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/boot/dts/berlin2q.dtsi | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 5925e6a16749..0fc826305614 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -102,13 +102,6 @@
 			reg = <0xdd0170 0x8>;
 		};
 
-		syspll: syspll at ea0030 {
-			compatible = "marvell,berlin2q-pll";
-			clocks = <&smclk>;
-			#clock-cells = <0>;
-			reg = <0xea0030 0x8>;
-		};
-
 		apb at e80000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -191,6 +184,27 @@
 			};
 		};
 
+		syspll: syspll at ea0030 {
+			compatible = "marvell,berlin2q-pll";
+			clocks = <&smclk>;
+			#clock-cells = <0>;
+			reg = <0xea0030 0x8>;
+		};
+
+		sdio0xinclk: sdio0xinclk at ea0158 {
+			compatible = "marvell,berlin-clk";
+			clocks = <&syspll>;
+			#clock-cells = <0>;
+			reg = <0xea0158 4>;
+		};
+
+		sdio1xinclk: sdio1xinclk at ea015c {
+			compatible = "marvell,berlin-clk";
+			clocks = <&syspll>;
+			#clock-cells = <0>;
+			reg = <0xea015c 4>;
+		};
+
 		apb at fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.9.1

[PATCH 5/5] ARM: berlin/dt: add sdio clocks to BG2Q

[Antoine Ténart]

Alexandre,

On Wed, Apr 23, 2014 at 04:01:07PM +0200, Alexandre Belloni wrote:
> Add sdio clocks to the berlin2q.dtsi
> Also reorder the syspll node
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  arch/arm/boot/dts/berlin2q.dtsi | 28 +++++++++++++++++++++-------
>  1 file changed, 21 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 5925e6a16749..0fc826305614 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -102,13 +102,6 @@
>  			reg = <0xdd0170 0x8>;
>  		};
>  
> -		syspll: syspll at ea0030 {
> -			compatible = "marvell,berlin2q-pll";
> -			clocks = <&smclk>;
> -			#clock-cells = <0>;
> -			reg = <0xea0030 0x8>;
> -		};
> -
>  		apb at e80000 {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> @@ -191,6 +184,27 @@
>  			};
>  		};
>  
> +		syspll: syspll at ea0030 {
> +			compatible = "marvell,berlin2q-pll";
> +			clocks = <&smclk>;
> +			#clock-cells = <0>;
> +			reg = <0xea0030 0x8>;
> +		};
> +
> +		sdio0xinclk: sdio0xinclk at ea0158 {
> +			compatible = "marvell,berlin-clk";
> +			clocks = <&syspll>;
> +			#clock-cells = <0>;
> +			reg = <0xea0158 4>;

I believe you can use

			reg = <0xea0158 0x4>;

since you used an hex value in the previous node. Plus we tend to use
hex values elsewhere too.

> +		};
> +
> +		sdio1xinclk: sdio1xinclk at ea015c {
> +			compatible = "marvell,berlin-clk";
> +			clocks = <&syspll>;
> +			#clock-cells = <0>;
> +			reg = <0xea015c 4>;

Ditto. This also applies to BG2/BG2CD and the documentation patches.

Thanks!

Antoine

> +		};
> +
>  		apb at fc0000 {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Antoine T?nart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 0/5] berlin: initial support for the clocks

[Alexandre Belloni]

This series adds support for the berlin PLLs. This allows to remove the bogus
fixed clocks that are used in the SoCs dts includes.

For now, I have left out the AVPLL to ease reviewing.

This is tested on a BG2Q DMP.

Alexandre Belloni (5):
  clk: berlin: add support for berlin plls
  clk: berlin: add berlin clocks DT bindings documentation
  ARM: berlin/dt: add cpupll and syspll support to BG2Q
  ARM: berlin/dt: add cpupll and syspll support to BG2CD
  ARM: berlin/dt: add cpupll and syspll support to BG2

 .../devicetree/bindings/clock/berlin-clock.txt     |  29 ++++++
 arch/arm/boot/dts/berlin2.dtsi                     |  56 ++++++++----
 arch/arm/boot/dts/berlin2cd.dtsi                   |  56 ++++++++----
 arch/arm/boot/dts/berlin2q.dtsi                    |  20 ++++-
 drivers/clk/Makefile                               |   1 +
 drivers/clk/berlin/Makefile                        |   1 +
 drivers/clk/berlin/clk.h                           |  35 ++++++++
 drivers/clk/berlin/pll-berlin2.c                   |  41 +++++++++
 drivers/clk/berlin/pll-berlin2q.c                  |  41 +++++++++
 drivers/clk/berlin/pll.c                           | 100 +++++++++++++++++++++
 10 files changed, 344 insertions(+), 36 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/berlin-clock.txt
 create mode 100644 drivers/clk/berlin/Makefile
 create mode 100644 drivers/clk/berlin/clk.h
 create mode 100644 drivers/clk/berlin/pll-berlin2.c
 create mode 100644 drivers/clk/berlin/pll-berlin2q.c
 create mode 100644 drivers/clk/berlin/pll.c

-- 
1.8.3.2

[PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation

[Alexandre Belloni]

Cc: devicetree at vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 .../devicetree/bindings/clock/berlin-clock.txt     | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/berlin-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/berlin-clock.txt b/Documentation/devicetree/bindings/clock/berlin-clock.txt
new file mode 100644
index 000000000000..ebc78f9b93a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/berlin-clock.txt
@@ -0,0 +1,29 @@
+Device Tree Clock bindings for Marvell Berlin clocks
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"marvell,berlin2-pll" or
+	"marvell,berlin2q-pll":
+		CPU PLL and System PLL
+- reg : Address and length of the clock register set.
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the input parent clock phandle for the clock.
+
+smclk: sysmgr-clock {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <25000000>;
+};
+
+cpupll: cpupll {
+	compatible = "marvell,berlin2-pll";
+	clocks = <&smclk>;
+	#clock-cells = <0>;
+	reg = <0xf7ea003c 8>;
+};
+
+
-- 
1.8.3.2

[PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation

[Mark Rutland]

On Fri, Mar 21, 2014 at 11:43:37AM +0000, Alexandre Belloni wrote:
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>  .../devicetree/bindings/clock/berlin-clock.txt     | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/berlin-clock.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/berlin-clock.txt b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> new file mode 100644
> index 000000000000..ebc78f9b93a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> @@ -0,0 +1,29 @@
> +Device Tree Clock bindings for Marvell Berlin clocks
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be one of the following:
> +	"marvell,berlin2-pll" or
> +	"marvell,berlin2q-pll":
> +		CPU PLL and System PLL
> +- reg : Address and length of the clock register set.
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : shall be the input parent clock phandle for the clock.

Nit: clocks aren't just phandles. Either define the full type (phandle +
clock-specifier pair), or don't define the type at all given it's a
standard property.

Otherwise this looks fine to me.

Cheers,
Mark.

> +
> +smclk: sysmgr-clock {
> +	compatible = "fixed-clock";
> +	#clock-cells = <0>;
> +	clock-frequency = <25000000>;
> +};
> +
> +cpupll: cpupll {
> +	compatible = "marvell,berlin2-pll";
> +	clocks = <&smclk>;
> +	#clock-cells = <0>;
> +	reg = <0xf7ea003c 8>;
> +};
> +
> +
> -- 
> 1.8.3.2
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[PATCH 2/5] clk: berlin: add berlin clocks DT bindings documentation

[Sebastian Hesselbarth]

On 03/21/2014 12:43 PM, Alexandre Belloni wrote:
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>   .../devicetree/bindings/clock/berlin-clock.txt     | 29 ++++++++++++++++++++++
>   1 file changed, 29 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/clock/berlin-clock.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/berlin-clock.txt b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> new file mode 100644
> index 000000000000..ebc78f9b93a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/berlin-clock.txt
> @@ -0,0 +1,29 @@
> +Device Tree Clock bindings for Marvell Berlin clocks
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible : shall be one of the following:
> +	"marvell,berlin2-pll" or

nit: just use a comma instead of "or" otherwise that "or" will
be pushed to the new last compatible every time we add a compatible.

> +	"marvell,berlin2q-pll":
> +		CPU PLL and System PLL
> +- reg : Address and length of the clock register set.
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : shall be the input parent clock phandle for the clock.
> +
> +smclk: sysmgr-clock {
> +	compatible = "fixed-clock";
> +	#clock-cells = <0>;
> +	clock-frequency = <25000000>;
> +};
> +
> +cpupll: cpupll {

Reminder: Should receive an update when you change the corresponding
nodes to cpupll: pll at foo

> +	compatible = "marvell,berlin2-pll";
> +	clocks = <&smclk>;
> +	#clock-cells = <0>;
> +	reg = <0xf7ea003c 8>;
> +};
> +
> +
>