[PATCH 5/6] ARM: AM43xx: clk: Change the cpts ref clock source to dpll_core_m5 clk

[george.cherian@ti.com (George Cherian)]

On 4/28/2014 12:40 PM, Richard Cochran wrote:
> On Mon, Apr 28, 2014 at 09:40:24AM +0530, George Cherian wrote:
>> cpsw_cpts_rft_clk has got the choice of 3 clocksources
>>   -dpll_core_m4_ck
>>   -dpll_core_m5_ck
>>   -dpll_disp_m2_ck
>>
>> By default dpll_core_m4_ck is selected, witn this as clock
>> source the CPTS doesnot work properly. It gives clockcheck errors
>> while running PTP.
>>
>>   clockcheck: clock jumped backward or running slower than expected!
> It is strange that I have never seen this error, since I have often
> tested linuxptp on a beagle bone white.
In beagle bone white (AM335x)  CPTS has a choice of 2 clocksource
-dpll_core_m5_ck
-dpll_core_m4_ck
and by default  dpll_core_m5_ck is used. Where as in AM437x the default 
clocksource used is dpll_core_m4_ck .

You can change the clocksource in beagle bone white by writing  1 to 
0x44e00520 (By default its 0).
>
> Can you please explain why this clock doesn't work correctly?
>
>> By selecting dpll_core_m5_ck as the clocksource fixes this issue.
>> In AM335x dpll_core_m5_ck is the default clocksource.
> The choice of clock source in the CPTS driver originally came from
> TI. It would be nice to know why that was the wrong choice.
>
> Thanks,
> Richard


-- 
-George