From mboxrd@z Thu Jan 1 00:00:00 1970 From: tomasz.figa@gmail.com (Tomasz Figa) Date: Tue, 06 May 2014 19:49:25 +0200 Subject: [PATCH v4 14/15] clk: exynos5420: add misc clocks In-Reply-To: <1399393610-23394-15-git-send-email-shaik.ameer@samsung.com> References: <1399393610-23394-1-git-send-email-shaik.ameer@samsung.com> <1399393610-23394-15-git-send-email-shaik.ameer@samsung.com> Message-ID: <536920A5.1090502@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Shaik, On 06.05.2014 18:26, Shaik Ameer Basha wrote: > This patch adds some missing miscellaneous clocks specific > to exynos5420. > > Signed-off-by: Rahul Sharma > Signed-off-by: Shaik Ameer Basha > --- > drivers/clk/samsung/clk-exynos5420.c | 14 +++++++++++--- > include/dt-bindings/clock/exynos5420.h | 2 ++ > 2 files changed, 13 insertions(+), 3 deletions(-) > > diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c > index e0e749d..e69e820 100644 > --- a/drivers/clk/samsung/clk-exynos5420.c > +++ b/drivers/clk/samsung/clk-exynos5420.c > @@ -273,7 +273,8 @@ PNAME(mout_group5_p) = {"mout_sclk_vpll", "mout_sclk_dpll"}; > > PNAME(mout_fimd1_final_p) = {"mout_fimd1", "mout_fimd1_opt"}; > PNAME(mout_sw_aclk66_p) = {"dout_aclk66", "mout_sclk_spll"}; > -PNAME(mout_user_aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66" }; > +PNAME(mout_user_aclk66_peric_p) = { "fin_pll", "mout_sw_aclk66"}; > +PNAME(mout_user_pclk66_gpio_p) = {"mout_sw_aclk66", "ffactor_sw_aclk66"}; > > PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"}; > PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"}; > @@ -372,10 +373,13 @@ static struct samsung_fixed_rate_clock exynos5420_fixed_rate_clks[] __initdata = > }; > > static struct samsung_fixed_factor_clock exynos5420_fixed_factor_clks[] __initdata = { > - FFACTOR(0, "sclk_hsic_12m", "fin_pll", 1, 2, 0), > + FFACTOR(0, "ffactor_hsic_12m", "fin_pll", 1, 2, 0), > + FFACTOR(0, "ffactor_sw_aclk66", "mout_sw_aclk66", 1, 2, 0), Is the "ffactor_" prefix also present in the datasheet? If not, it should be removed from clock names as well. Best regards, Tomasz