From mboxrd@z Thu Jan 1 00:00:00 1970 From: hdegoede@redhat.com (Hans de Goede) Date: Wed, 07 May 2014 10:25:37 +0200 Subject: [PATCH 0/7] Add Allwinner A31 USB support In-Reply-To: <1399434623-20383-1-git-send-email-maxime.ripard@free-electrons.com> References: <1399434623-20383-1-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <5369EE01.1090909@redhat.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On 05/07/2014 05:50 AM, Maxime Ripard wrote: > Hi everyone, > > This patchset adds support for the USB controllers found in the > Allwinner A31. > > While the design is similar to the earlier Allwinner SoCs that are > already supported, a few details here and there change, like the fact > that the PHYs now have one clock per phy, while it used to be only one > for all the PHYs. > > Thanks, > Maxime Thanks for working on this. Looks good, the entire series is: Reviewed-by: Hans de Goede Regards, Hans > > Boris BREZILLON (2): > usb: ehci-platform: add optional reset controller retrieval > ARM: sunxi: dt: add APP4-EVB1 board support > > Maxime Ripard (5): > clk: sunxi: Implement A31 USB clock > ARM: sun6i: Add the USB clocks to the DTSI. > phy: usb: sunxi: Introduce Allwinner A31 USB PHY support > usb: ohci-platform: Enable optional use of reset controller > ARM: sun6i: dt: Add support for the USB controllers > > Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + > Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 63 ++++++++++++++++ > arch/arm/boot/dts/sun6i-a31.dtsi | 88 ++++++++++++++++++++++ > drivers/clk/sunxi/clk-sunxi.c | 6 ++ > drivers/phy/phy-sun4i-usb.c | 35 ++++++--- > drivers/usb/host/ehci-platform.c | 25 +++++- > drivers/usb/host/ohci-platform.c | 25 +++++- > 9 files changed, 234 insertions(+), 11 deletions(-) > create mode 100644 arch/arm/boot/dts/sun6i-a31-app4-evb1.dts >