From: archit@ti.com (Archit Taneja)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 0/3] arm: dts: dra7: Updates for adding crossbar device
Date: Thu, 8 May 2014 13:43:36 +0530 [thread overview]
Message-ID: <536B3CB0.2050907@ti.com> (raw)
In-Reply-To: <20140506214526.GF2626@ti.com>
On Wednesday 07 May 2014 03:15 AM, Darren Etheridge wrote:
> Sricharan R <r.sricharan@ti.com> wrote on Tue [2014-May-06 19:26:16 +0530]:
>> Some socs have a large number of interrupts requests to service
>> the needs of its many peripherals and subsystems. All of the interrupt
>> requests lines from the subsystems are not needed at the same
>> time, so they have to be muxed to the controllers appropriately.
>> In such places a interrupt controllers are preceded by an
>> IRQ CROSSBAR that provides flexibility in muxing the device interrupt
>> requests to the controller inputs.
>>
>> The dts file update to support the crossbar device and convert
>> peripheral irq numbers to crossbar number are added here.
>>
>> This is a rebase of V4 series on top of 3.15-rc4
>>
>> This series depends on crossbar-driver-fixes sent below
>> http://marc.info/?l=linux-omap&m=139929963420299&w=2
>>
>> Sricharan R (3):
>> arm: dts: dra7: Add crossbar device binding
>> arm: dts: dra7: Replace peripheral interrupt numbers with crossbar
>> inputs
>> arm: dts: dra7: Add routable-irqs property for gic node
>>
>
> OK, assuming the bisectability issues discussed earlier on this thread
> are addressed. I have tested the earlier crossbar patch series in
> conjunction with this dts series with VIP capture and DSS display
> running together on DRA7. Looks good with this combination of
> devices. VIP is one of the modules that must have a crossbar mapping as
> there is no default interrupt mapping for it, therefore VIP makes a good
> test case.
>
> So please feel free to add:
>
> Tested-by: Darren Etheridge <detheridge@ti.com>
DMM doesn't get used by default since it's hwmod is missing in DRA7x's
hwmod data. I added the hwmod and tried using dmm with omapdrm, it works
fine.
So, for DSS and DMM:
Tested-by: Archit Taneja <archit@ti.com>
>
>
>> arch/arm/boot/dts/dra7.dtsi | 109 +++++++++++++++++++++++++------------------
>> 1 file changed, 63 insertions(+), 46 deletions(-)
>>
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-05-08 8:13 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-06 13:56 [PATCH V5 0/3] arm: dts: dra7: Updates for adding crossbar device Sricharan R
2014-05-06 13:56 ` [PATCH V5 1/3] arm: dts: dra7: Add crossbar device binding Sricharan R
2014-05-06 19:40 ` Felipe Balbi
2014-05-06 19:46 ` Nishanth Menon
2014-05-06 19:58 ` Darren Etheridge
2014-05-06 20:07 ` Darren Etheridge
2014-05-06 13:56 ` [PATCH V5 2/3] arm: dts: dra7: Replace peripheral interrupt numbers with crossbar inputs Sricharan R
2014-05-06 14:41 ` Tony Lindgren
2014-05-06 13:56 ` [PATCH V5 3/3] arm: dts: dra7: Add routable-irqs property for gic node Sricharan R
2014-05-06 21:45 ` [PATCH V5 0/3] arm: dts: dra7: Updates for adding crossbar device Darren Etheridge
2014-05-07 4:40 ` Sricharan R
2014-05-08 8:13 ` Archit Taneja [this message]
2014-05-07 12:06 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536B3CB0.2050907@ti.com \
--to=archit@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).