[PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards

[tomasz.figa@gmail.com (Tomasz Figa)]

Hi Rahul,

On 15.05.2014 17:04, Rahul Sharma wrote:
> From: Rahul Sharma <Rahul.Sharma@samsung.com>
> 
> Enable hdmi for exynos5250 based snow board, exynos5420
> based peach pit board and 5800 based peach-pi board.
> 
> V5:
> 1) Moved hdmi_hpd_irq pin back to board files.
> 2) Replaced 0 with GPIO_ACTIVE_HIGH while adding gpio property
> to HDMI node.
> 
> V4:
> 1) Removed hdmi_hpd_irq pin from peach-pi board as it already
> present in exynos5420-pinctrl.dtsi.
> 
> V3:
> 1) Re-spin on dependent patches.
> 2) Added patch to enable hdmi for Peach-pi board.
> 
> V2:
> 1) Re-spin on dependent patches.
> 2) Added patch to remove chip specific hdmi hpd gpio from
> board file top SoC file.
> 
> This series is based on Kukjin Kims, for-next branch.
> 
> It is dependent on
> 
> 1) Sachin's patch: "ARM: dts: exynos5250-snow: add tps65090 power regulator"
> at https://patches.linaro.org/28325/ : [Reviewed-by: Doug Anderson]
> 
> All other dependent patches are already landed in maintainers
> tree.
> 
> Rahul Sharma (4):
>   ARM: dts: enable hdmi for exynos5250 based snow board
>   ARM: dts: change to correct compatible string for exynos5420 hdmi
>   ARM: dts: enable hdmi for exynos5420 based peach-pit board
>   ARM: dts: enable hdmi for exynos5800 based peach-pi board
> 
>  arch/arm/boot/dts/exynos5250-cros-common.dtsi |    6 +++++-
>  arch/arm/boot/dts/exynos5250-snow.dts         |   14 ++++++++++++++
>  arch/arm/boot/dts/exynos5420-peach-pit.dts    |   22 ++++++++++++++++++++++
>  arch/arm/boot/dts/exynos5420.dtsi             |    7 ++++++-
>  arch/arm/boot/dts/exynos5800-peach-pi.dts     |   22 ++++++++++++++++++++++
>  5 files changed, 69 insertions(+), 2 deletions(-)
> 

For the whole series:

Acked-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz