linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: wharms@bfs.de (walter harms)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: imx: fix error handling
Date: Fri, 16 May 2014 13:49:10 +0200	[thread overview]
Message-ID: <5375FB36.8020004@bfs.de> (raw)
In-Reply-To: <20140516111646.GC4366@lianli>



Am 16.05.2014 13:16, schrieb Emil Goode:
> Hello Walter,
> 
> On Fri, May 16, 2014 at 12:40:19PM +0200, walter harms wrote:
>>
>>
>> Am 16.05.2014 11:54, schrieb Emil Goode:
>>> If we fail to allocate struct platform_device pdev we
>>> dereference it after the goto label err.
>>>
>>> I have rearranged the error handling a bit to fix the issue
>>> and also make it more clear.
>>>
>>> Signed-off-by: Emil Goode <emilgoode@gmail.com>
>>> ---
>>> v2: Changed to return -ENOMEM instead of ret where possible and
>>>     updated the subject line.
>>>
>>>  arch/arm/mach-imx/devices/platform-ipu-core.c |   22 +++++++++++++---------
>>>  1 file changed, 13 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
>>> index fc4dd7c..68f2a4a 100644
>>> --- a/arch/arm/mach-imx/devices/platform-ipu-core.c
>>> +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c
>>> @@ -77,34 +77,38 @@ struct platform_device *__init imx_alloc_mx3_camera(
>>>  
>>>  	pdev = platform_device_alloc("mx3-camera", 0);
>>>  	if (!pdev)
>>> -		goto err;
>>> +		return ERR_PTR(-ENOMEM);
>>>  
>>>  	pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
>>>  	if (!pdev->dev.dma_mask)
>>> -		goto err;
>>> +		goto put_pdev;
>>>  
>>>  	*pdev->dev.dma_mask = DMA_BIT_MASK(32);
>>>  	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>>>  
>>>  	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
>>>  	if (ret)
>>> -		goto err;
>>> +		goto free_dma_mask;
>>>  
>>>  	if (pdata) {
>>>  		struct mx3_camera_pdata *copied_pdata;
>>>  
>>>  		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
>>> -		if (ret) {
>>> -err:
>>> -			kfree(pdev->dev.dma_mask);
>>> -			platform_device_put(pdev);
>>> -			return ERR_PTR(-ENODEV);
>>> -		}
>>> +		if (ret)
>>> +			goto free_dma_mask;
>>> +
>>>  		copied_pdata = dev_get_platdata(&pdev->dev);
>>>  		copied_pdata->dma_dev = &imx_ipu_coredev->dev;
>>
>>
>> the patch is fine, but what use is this copied_pdata ?
>> It scope ends next line ?
>>
>> re,
>>  wh
> 
> I also thought that looked a bit odd, but copied_pdata is a temporary
> pointer to platform_data of the dev struct.
> 
> dev_get_platdata looks like this:
> 
> static inline void *dev_get_platdata(const struct device *dev)
> {
>         return dev->platform_data;
> }
> 
> So I believe it's a more compact way of writing:
> 
> pdev->dev->platform_data->dma_dev = &imx_ipu_coredev->dev;

ok i see ...

Both ways are horrible to read, but the second is at least
understandable. fortunately i am not the maintainer.

thx,

re,
 wh

> Best regards,
> 
> Emil Goode
> 
>>
>>>  	}
>>>  
>>>  	return pdev;
>>> +
>>> +free_dma_mask:
>>> +	kfree(pdev->dev.dma_mask);
>>> +put_pdev:
>>> +	platform_device_put(pdev);
>>> +
>>> +	return ERR_PTR(ret);
>>>  }
>>>  
>>>  struct platform_device *__init imx_add_mx3_sdc_fb(
> 

  reply	other threads:[~2014-05-16 11:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-16  9:54 [PATCH v2] ARM: imx: fix error handling Emil Goode
2014-05-16 10:40 ` walter harms
2014-05-16 11:16   ` Emil Goode
2014-05-16 11:49     ` walter harms [this message]
2014-05-16 19:31       ` Uwe Kleine-König
2014-05-17 15:35         ` Emil Goode
2014-05-17 19:05           ` Uwe Kleine-König
2014-05-17 22:14             ` Emil Goode
2014-05-18 14:37             ` Emil Goode
2014-05-18 15:38             ` Emil Goode
2014-05-16 19:24 ` Uwe Kleine-König
2014-05-16 22:21   ` Dan Carpenter
2014-05-16 22:47     ` Emil Goode
2014-05-16 23:18   ` Emil Goode

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5375FB36.8020004@bfs.de \
    --to=wharms@bfs.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).