From mboxrd@z Thu Jan 1 00:00:00 1970 From: j-keerthy@ti.com (Keerthy) Date: Thu, 30 Mar 2017 08:59:31 +0530 Subject: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree In-Reply-To: <20170329043753.GB1596@localhost.localdomain> References: <1489046762-11288-1-git-send-email-j-keerthy@ti.com> <64ab8413-6cf1-864f-0550-9c8db59523f7@ti.com> <20170323205256.GO10760@atomide.com> <20170324142610.GX10760@atomide.com> <20170329043753.GB1596@localhost.localdomain> Message-ID: <5380b1bc-f3c6-a0ef-e458-7509d95d631e@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wednesday 29 March 2017 10:07 AM, Eduardo Valentin wrote: > Keerthy, > > On Fri, Mar 24, 2017 at 07:26:10AM -0700, Tony Lindgren wrote: >> * Keerthy [170323 20:29]: >>> >>> >>> On Friday 24 March 2017 02:22 AM, Tony Lindgren wrote: >>>> * Keerthy [170321 20:45]: >>>>> >>>>> >>>>> On Thursday 09 March 2017 01:35 PM, Keerthy wrote: >>>>>> Currently the slope and offset values for calculating the >>>>>> hot spot temperature of a particular thermal zone is part >>>>>> of driver data. Pass them here instead and obtain the values >>>>>> while of node parsing. >>>>>> >>>>>> Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. > > Have you tried on boards that need negative coefficients? > > https://patchwork.kernel.org/patch/9619577/ Yes. I retrieved the negative values nicely in the driver passed via Device Tree. > >>>>> >>>>> Hi Eduardo, >>>>> >>>>> If the series looks okay could you please pull this? >>>> >>>> Also.. Are the dts changes safe for me to pick separately? >>> >>> Yes Tony they are safe to pulled separately. >> >> OK applying patches 1 - 5 of this series into omap-for-v4.12/dt-v2. > > Keerthy, > > The only thing I want you to confirm is if you are really getting the > negative coefficients, because currently of-thermal reads the array > using an OF helper that understands only unsigned. For this reason, I > will be queueing your patches only for next merge window, not as a fix, > not for rc's. I am getting negative co-efficients. > > >> >> Thanks, >> >> Tony