[PATCH] ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]

[hdegoede@redhat.com (Hans de Goede)]

Hi,

On 05/28/2014 05:59 PM, Fabio Estevam wrote:
> Hans,
> 
> On Wed, May 28, 2014 at 12:36 PM, Hans de Goede <hdegoede@redhat.com> wrote:
> 
>> The proper fix is obvious, if we've shutdown everything due to there
>> not being a device present at the initial probe, don't call
>> ahci_platform_resume_host on resume, as is done in the attached patch.
> 
> I tested your attached patch. It does not build as it lacks to add the
> definition of imxpriv inside the suspend/resume functions. After
> fixing it I get:
> 
> root at freescale /$ echo mem > /sys/power/state
> PM: Syncing filesystems ... done.
> Freezing user space processes ... (elapsed 0.002 seconds) done.
> Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
> PM: suspend of devices complete after 91.109 msecs
> PM: suspend devices took 0.100 seconds
> PM: late suspend of devices complete after 9.086 msecs
> PM: noirq suspend of devices complete after 8.780 msecs
> Disabling non-boot CPUs ...
> CPU1: shutdown
> CPU2: shutdown
> CPU3: shutdown
> Enabling non-boot CPUs ...
> CPU1: Booted secondary processor
> CPU1 is up
> CPU2: Booted secondary processor
> CPU2 is up
> CPU3: Booted secondary processor
> CPU3 is up
> PM: noirq resume of devices complete after 6.914 msecs
> PM: early resume of devices complete after 5.160 msecs
> PM: resume of devices complete after 167.025 msecs
> PM: resume devices took 0.180 seconds
> Restarting tasks ... done.
> ata1: failed to resume link (SControl 2003)
> random: nonblocking pool is initialized
> root at freescale /$ ata1: softreset failed (1st FIS failed)
> ata1: failed to resume link (SControl 2003)
> ata1: softreset failed (1st FIS failed)
> ata1: failed to resume link (SControl 2003)
> ata1: softreset failed (1st FIS failed)
> ata1: limiting SATA link speed to 1.5 Gbps
> ata1: failed to resume link (SControl 2003)
> ata1: softreset failed (1st FIS failed)
> ata1: reset failed, giving up
> 
> With Shawn's version I  do not get the suspend error messages:
> ...
> CPU1: Booted secondary processor
> CPU1 is up
> CPU2: Booted secondary processor
> CPU2 is up
> CPU3: Booted secondary processor
> CPU3 is up
> PM: noirq resume of devices complete after 5.836 msecs
> PM: early resume of devices complete after 5.334 msecs
> PM: resume of devices complete after 176.763 msecs
> PM: resume devices took 0.190 seconds
> Restarting tasks ... done.
> ata1: SATA link down (SStatus 0 SControl 300)
> random: nonblocking pool is initialized
> 

Ah yes I see, the ahci_imx suspend/resume handler now no longer
touches the controller, but the ata core is still trying to use it.

Ok, in that case I agree that your original patch is the best
solution.

Your original patch is:

Acked-by: Hans de Goede <hdegoede@redhat.com>


Regards,

Hans