From: dietmar.eggemann@arm.com (Dietmar Eggemann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/11] sched: move cfs task on a CPU with higher capacity
Date: Fri, 30 May 2014 14:26:49 +0100 [thread overview]
Message-ID: <53888719.70604@arm.com> (raw)
In-Reply-To: <1400860385-14555-11-git-send-email-vincent.guittot@linaro.org>
On 23/05/14 16:53, Vincent Guittot wrote:
> If the CPU is used for handling lot of IRQs, trig a load balance to check if
> it's worth moving its tasks on another CPU that has more capacity
>
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> ---
> kernel/sched/fair.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index e8a30f9..2501e49 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -5948,6 +5948,13 @@ static bool update_sd_pick_busiest(struct lb_env *env,
> if (sgs->sum_nr_running > sgs->group_capacity)
> return true;
>
> + /*
> + * The group capacity is reduced probably because of activity from other
Here 'group capacity' refers to sgs->group_power and not to
sgs->group_capacity, right?
> + * sched class or interrupts which use part of the available capacity
> + */
... 'interrupts' only w/ CONFIG_IRQ_TIME_ACCOUNTING=y, right ?
> + if ((sg->sgp->power_orig * 100) > (sgs->group_power * env->sd->imbalance_pct))
> + return true;
> +
[...]
next prev parent reply other threads:[~2014-05-30 13:26 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-23 15:52 [PATCH v2 00/11] sched: consolidation of cpu_power Vincent Guittot
2014-05-23 15:52 ` [PATCH v2 01/11] sched: fix imbalance flag reset Vincent Guittot
2014-05-25 10:33 ` Preeti U Murthy
2014-05-26 7:49 ` Vincent Guittot
2014-05-26 9:16 ` Preeti U Murthy
2014-05-26 10:14 ` Vincent Guittot
2014-05-23 15:52 ` [PATCH v2 02/11] sched: remove a wake_affine condition Vincent Guittot
2014-05-27 12:48 ` Peter Zijlstra
2014-05-27 15:19 ` Vincent Guittot
2014-05-27 15:39 ` Peter Zijlstra
2014-05-27 16:14 ` Vincent Guittot
2014-05-28 6:49 ` Vincent Guittot
2014-05-28 15:09 ` Dietmar Eggemann
2014-05-28 15:25 ` Vincent Guittot
2014-05-27 13:43 ` Peter Zijlstra
2014-05-27 13:45 ` Peter Zijlstra
2014-05-27 15:20 ` Vincent Guittot
2014-05-23 15:52 ` [PATCH v2 03/11] sched: fix avg_load computation Vincent Guittot
2014-05-27 13:48 ` Peter Zijlstra
2014-05-23 15:52 ` [PATCH v2 04/11] sched: Allow all archs to set the power_orig Vincent Guittot
2014-05-30 14:04 ` Dietmar Eggemann
2014-05-30 14:46 ` Peter Zijlstra
2014-05-30 20:50 ` Vincent Guittot
2014-06-04 9:42 ` Dietmar Eggemann
2014-06-04 11:15 ` Vincent Guittot
2014-06-05 8:59 ` Dietmar Eggemann
2014-06-16 9:01 ` Vincent Guittot
2014-06-03 13:22 ` Morten Rasmussen
2014-06-03 14:02 ` Vincent Guittot
2014-06-04 11:17 ` Morten Rasmussen
2014-06-06 7:01 ` Vincent Guittot
2014-05-23 15:52 ` [PATCH v2 05/11] ARM: topology: use new cpu_power interface Vincent Guittot
2014-05-25 13:22 ` Preeti U Murthy
2014-05-26 8:25 ` Vincent Guittot
2014-05-26 9:19 ` Preeti U Murthy
2014-05-23 15:53 ` [PATCH v2 06/11] sched: add per rq cpu_power_orig Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 07/11] Revert "sched: Put rq's sched_avg under CONFIG_FAIR_GROUP_SCHED" Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 08/11] sched: get CPU's activity statistic Vincent Guittot
2014-05-27 17:32 ` Peter Zijlstra
2014-05-28 7:01 ` Vincent Guittot
2014-05-28 12:10 ` Morten Rasmussen
2014-05-28 13:15 ` Vincent Guittot
2014-05-28 15:47 ` Morten Rasmussen
2014-05-28 16:39 ` Vincent Guittot
2014-06-03 12:03 ` Morten Rasmussen
2014-06-03 15:59 ` Peter Zijlstra
2014-06-03 17:41 ` Morten Rasmussen
2014-06-03 15:50 ` Peter Zijlstra
2014-06-03 17:20 ` Morten Rasmussen
2014-06-04 7:47 ` Vincent Guittot
2014-06-04 8:08 ` Peter Zijlstra
2014-06-04 8:55 ` Morten Rasmussen
2014-06-04 9:23 ` Peter Zijlstra
2014-06-04 9:35 ` Vincent Guittot
2014-06-04 10:25 ` Morten Rasmussen
2014-06-04 9:44 ` Morten Rasmussen
2014-06-04 9:32 ` Vincent Guittot
2014-06-04 10:00 ` Morten Rasmussen
2014-06-04 10:17 ` Peter Zijlstra
2014-06-04 10:36 ` Morten Rasmussen
2014-06-04 10:55 ` Peter Zijlstra
2014-06-04 11:07 ` Vincent Guittot
2014-06-04 11:23 ` Morten Rasmussen
2014-06-04 11:52 ` Vincent Guittot
2014-06-04 13:09 ` Morten Rasmussen
2014-06-04 13:23 ` Morten Rasmussen
2014-05-28 15:17 ` Peter Zijlstra
2014-06-03 15:40 ` Peter Zijlstra
2014-06-03 17:16 ` Morten Rasmussen
2014-06-03 17:37 ` Peter Zijlstra
2014-06-03 17:39 ` Peter Zijlstra
2014-06-03 23:11 ` Yuyang Du
2014-05-30 9:50 ` Dietmar Eggemann
2014-05-30 19:20 ` Vincent Guittot
2014-06-01 11:33 ` Dietmar Eggemann
2014-06-02 14:07 ` Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 09/11] sched: test the cpu's capacity in wake affine Vincent Guittot
2014-05-28 10:58 ` Peter Zijlstra
2014-05-28 11:15 ` Vincent Guittot
2014-11-24 0:34 ` Wanpeng Li
2014-11-24 13:23 ` Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 10/11] sched: move cfs task on a CPU with higher capacity Vincent Guittot
2014-05-29 9:50 ` Peter Zijlstra
2014-05-29 19:37 ` Vincent Guittot
2014-05-30 6:29 ` Peter Zijlstra
2014-05-30 20:05 ` Vincent Guittot
2014-06-02 17:06 ` Vincent Guittot
2014-06-03 11:15 ` Peter Zijlstra
2014-06-03 12:31 ` Vincent Guittot
2014-05-29 14:04 ` Peter Zijlstra
2014-05-29 19:44 ` Vincent Guittot
2014-05-30 13:26 ` Dietmar Eggemann [this message]
2014-05-30 19:24 ` Vincent Guittot
2014-05-30 19:45 ` Nicolas Pitre
2014-05-30 20:07 ` Vincent Guittot
2014-05-23 15:53 ` [PATCH v2 11/11] sched: replace capacity by activity Vincent Guittot
2014-05-29 13:55 ` Peter Zijlstra
2014-05-29 19:51 ` Vincent Guittot
2014-06-02 6:21 ` Preeti U Murthy
2014-06-03 9:50 ` Vincent Guittot
2014-05-29 14:02 ` Peter Zijlstra
2014-05-29 19:56 ` Vincent Guittot
2014-05-30 6:34 ` Peter Zijlstra
2014-05-30 19:13 ` Vincent Guittot
2014-05-26 9:44 ` [PATCH v2 00/11] sched: consolidation of cpu_power Preeti U Murthy
2014-05-26 10:04 ` Vincent Guittot
2014-05-26 15:54 ` Vincent Guittot
2014-05-27 5:47 ` Preeti U Murthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53888719.70604@arm.com \
--to=dietmar.eggemann@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).