[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

[George Cherian]

AM437x EPOS evm use external clock for RMII interface.
Enable the same in DT. 

Signed-off-by: George Cherian <george.cherian@ti.com>
Reported-by: Nishanth Menon <nm@ti.com>
---
 arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 19f1f7e..90098f9 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -319,6 +319,10 @@
 	phy-mode = "rmii";
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
-- 
1.8.3.1

[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

[Nishanth Menon]

On 06/06/2014 01:17 AM, George Cherian wrote:
> AM437x EPOS evm use external clock for RMII interface.
> Enable the same in DT. 
> 
> Signed-off-by: George Cherian <george.cherian@ti.com>
> Reported-by: Nishanth Menon <nm@ti.com>
> ---
>  arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
> index 19f1f7e..90098f9 100644
> --- a/arch/arm/boot/dts/am43x-epos-evm.dts
> +++ b/arch/arm/boot/dts/am43x-epos-evm.dts
> @@ -319,6 +319,10 @@
>  	phy-mode = "rmii";
>  };
>  
> +&phy_sel {
> +	rmii-clock-ext;
> +};
> +
>  &i2c0 {
>  	status = "okay";
>  	pinctrl-names = "default";
> 
Where does this apply on?
With linux-next next-20140506 tag, and this patch applied, I get the
following error.

  LD      kernel/trace/built-in.o
  LD      kernel/built-in.o
build fail, Error:
Error: arch/arm/boot/dts/am43x-epos-evm.dts:219.2-3 label or path,
'phy_sel', not found
FATAL ERROR: Syntax error parsing input tree
make[1]: *** [arch/arm/boot/dts/am43x-epos-evm.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [dtbs] Error 2
make: *** Waiting for unfinished jobs....

in the future, it is helpful if you can point out that this is a
regression seen on next-20140603 and the patch needs to be applied on
some specific branch.

for the record:
last working next tag:
https://github.com/nmenon/kernel-test-logs/blob/next-20140602/omap2plus_defconfig/am43xx-epos.txt

first broken next tag:
https://github.com/nmenon/kernel-test-logs/blob/next-20140603/omap2plus_defconfig/am43xx-epos.txt


-- 
Regards,
Nishanth Menon

[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

[Nishanth Menon]

On 06/06/2014 01:53 AM, Nishanth Menon wrote:
> On 06/06/2014 01:17 AM, George Cherian wrote:
>> AM437x EPOS evm use external clock for RMII interface.
>> Enable the same in DT. 
>>
>> Signed-off-by: George Cherian <george.cherian@ti.com>
>> Reported-by: Nishanth Menon <nm@ti.com>
>> ---
>>  arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
>> index 19f1f7e..90098f9 100644
>> --- a/arch/arm/boot/dts/am43x-epos-evm.dts
>> +++ b/arch/arm/boot/dts/am43x-epos-evm.dts
>> @@ -319,6 +319,10 @@
>>  	phy-mode = "rmii";
>>  };
>>  
>> +&phy_sel {
>> +	rmii-clock-ext;
>> +};
>> +
>>  &i2c0 {
>>  	status = "okay";
>>  	pinctrl-names = "default";
>>
> Where does this apply on?
> With linux-next next-20140506 tag, and this patch applied, I get the
> following error.
> 
>   LD      kernel/trace/built-in.o
>   LD      kernel/built-in.o
> build fail, Error:
> Error: arch/arm/boot/dts/am43x-epos-evm.dts:219.2-3 label or path,
> 'phy_sel', not found
> FATAL ERROR: Syntax error parsing input tree
> make[1]: *** [arch/arm/boot/dts/am43x-epos-evm.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [dtbs] Error 2
> make: *** Waiting for unfinished jobs....
> 
> in the future, it is helpful if you can point out that this is a
> regression seen on next-20140603 and the patch needs to be applied on
> some specific branch.
> 
> for the record:
> last working next tag:
> https://github.com/nmenon/kernel-test-logs/blob/next-20140602/omap2plus_defconfig/am43xx-epos.txt
> 
> first broken next tag:
> https://github.com/nmenon/kernel-test-logs/blob/next-20140603/omap2plus_defconfig/am43xx-epos.txt
> 
> 
interestingly, i just re-tested today's tag without the patch
(omap2plus_defconfig):
http://slexy.org/raw/s205sRdFvy

I wonder why the behavior change and what was being fixed here?

-- 
Regards,
Nishanth Menon

[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

[George Cherian]

On 6/6/2014 12:25 PM, Nishanth Menon wrote:
> On 06/06/2014 01:53 AM, Nishanth Menon wrote:
>> On 06/06/2014 01:17 AM, George Cherian wrote:
>>> AM437x EPOS evm use external clock for RMII interface.
>>> Enable the same in DT.
>>>
>>> Signed-off-by: George Cherian <george.cherian@ti.com>
>>> Reported-by: Nishanth Menon <nm@ti.com>
>>> ---
>>>   arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++
>>>   1 file changed, 4 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
>>> index 19f1f7e..90098f9 100644
>>> --- a/arch/arm/boot/dts/am43x-epos-evm.dts
>>> +++ b/arch/arm/boot/dts/am43x-epos-evm.dts
>>> @@ -319,6 +319,10 @@
>>>   	phy-mode = "rmii";
>>>   };
>>>   
>>> +&phy_sel {
>>> +	rmii-clock-ext;
>>> +};
>>> +
>>>   &i2c0 {
>>>   	status = "okay";
>>>   	pinctrl-names = "default";
>>>
>> Where does this apply on?
>> With linux-next next-20140506 tag, and this patch applied, I get the
>> following error.
>>
>>    LD      kernel/trace/built-in.o
>>    LD      kernel/built-in.o
>> build fail, Error:
>> Error: arch/arm/boot/dts/am43x-epos-evm.dts:219.2-3 label or path,
>> 'phy_sel', not found
>> FATAL ERROR: Syntax error parsing input tree
>> make[1]: *** [arch/arm/boot/dts/am43x-epos-evm.dtb] Error 1
>> make[1]: *** Waiting for unfinished jobs....
>> make: *** [dtbs] Error 2
>> make: *** Waiting for unfinished jobs....
>>
>> in the future, it is helpful if you can point out that this is a
>> regression seen on next-20140603 and the patch needs to be applied on
>> some specific branch.
>>
>> for the record:
>> last working next tag:
>> https://github.com/nmenon/kernel-test-logs/blob/next-20140602/omap2plus_defconfig/am43xx-epos.txt
>>
>> first broken next tag:
>> https://github.com/nmenon/kernel-test-logs/blob/next-20140603/omap2plus_defconfig/am43xx-epos.txt
>>
>>
> interestingly, i just re-tested today's tag without the patch
> (omap2plus_defconfig):
> http://slexy.org/raw/s205sRdFvy
Lil old kernel
from the above link.

Linux version 3.15.0-rc4-next-20140506 (nmenon at kahuna) (gcc version 
4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #2 SMP Fri Jun 6 01:47:42 CDT 2014
> I wonder why the behavior change and what was being fixed here?
This kernel should not have the dt entries for phy sel driver.
Thats why it is working.


-- 
-George

[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

[George Cherian]

On 6/6/2014 12:23 PM, Nishanth Menon wrote:
> On 06/06/2014 01:17 AM, George Cherian wrote:
>> AM437x EPOS evm use external clock for RMII interface.
>> Enable the same in DT.
>>
>> Signed-off-by: George Cherian <george.cherian@ti.com>
>> Reported-by: Nishanth Menon <nm@ti.com>
>> ---
>>   arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
>> index 19f1f7e..90098f9 100644
>> --- a/arch/arm/boot/dts/am43x-epos-evm.dts
>> +++ b/arch/arm/boot/dts/am43x-epos-evm.dts
>> @@ -319,6 +319,10 @@
>>   	phy-mode = "rmii";
>>   };
>>   
>> +&phy_sel {
>> +	rmii-clock-ext;
>> +};
>> +
>>   &i2c0 {
>>   	status = "okay";
>>   	pinctrl-names = "default";
>>
> Where does this apply on?
> With linux-next next-20140506 tag, and this patch applied, I get the
Is'nt next-20140506 a month old.
I tried the patch on next-20140604.
> following error.
>
>    LD      kernel/trace/built-in.o
>    LD      kernel/built-in.o
> build fail, Error:
> Error: arch/arm/boot/dts/am43x-epos-evm.dts:219.2-3 label or path,
> 'phy_sel', not found
> FATAL ERROR: Syntax error parsing input tree
> make[1]: *** [arch/arm/boot/dts/am43x-epos-evm.dtb] Error 1
> make[1]: *** Waiting for unfinished jobs....
> make: *** [dtbs] Error 2
> make: *** Waiting for unfinished jobs....
>
> in the future, it is helpful if you can point out that this is a
> regression seen on next-20140603 and the patch needs to be applied on
> some specific branch.
>
> for the record:
> last working next tag:
> https://github.com/nmenon/kernel-test-logs/blob/next-20140602/omap2plus_defconfig/am43xx-epos.txt
>
> first broken next tag:
> https://github.com/nmenon/kernel-test-logs/blob/next-20140603/omap2plus_defconfig/am43xx-epos.txt
>
>


-- 
-George

[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

[Nishanth Menon]

On 06/06/2014 04:52 AM, George Cherian wrote:
> On 6/6/2014 12:23 PM, Nishanth Menon wrote:
>> On 06/06/2014 01:17 AM, George Cherian wrote:
>>> AM437x EPOS evm use external clock for RMII interface.
>>> Enable the same in DT.
>>>
>>> Signed-off-by: George Cherian <george.cherian@ti.com>
>>> Reported-by: Nishanth Menon <nm@ti.com>
>>> ---
>>>   arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++
>>>   1 file changed, 4 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
>>> index 19f1f7e..90098f9 100644
>>> --- a/arch/arm/boot/dts/am43x-epos-evm.dts
>>> +++ b/arch/arm/boot/dts/am43x-epos-evm.dts
>>> @@ -319,6 +319,10 @@
>>>   	phy-mode = "rmii";
>>>   };
>>>   
>>> +&phy_sel {
>>> +	rmii-clock-ext;
>>> +};
>>> +
>>>   &i2c0 {
>>>   	status = "okay";
>>>   	pinctrl-names = "default";
>>>
>> Where does this apply on?
>> With linux-next next-20140506 tag, and this patch applied, I get the
> Is'nt next-20140506 a month old.

Uggh.. yeah - 1AM+migraine is not a good combination to try to do
testing. :( Apologies on the noise


> I tried the patch on next-20140604.

Tested on next-20140606 - applies clean, builds and works :)

am43xx-epos:  Boot PASS: http://slexy.org/raw/s2fT6zs45y

Tested-by: Nishanth Menon <nm@ti.com>

-- 
Regards,
Nishanth Menon

[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

[Tony Lindgren]

* Nishanth Menon <nm@ti.com> [140606 08:30]:
> On 06/06/2014 04:52 AM, George Cherian wrote:
> > On 6/6/2014 12:23 PM, Nishanth Menon wrote:
> >> On 06/06/2014 01:17 AM, George Cherian wrote:
> >>> AM437x EPOS evm use external clock for RMII interface.
> >>> Enable the same in DT.
> >>>
> >>> Signed-off-by: George Cherian <george.cherian@ti.com>
> >>> Reported-by: Nishanth Menon <nm@ti.com>
> >>> ---
> >>>   arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++
> >>>   1 file changed, 4 insertions(+)
> >>>
> >>> diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
> >>> index 19f1f7e..90098f9 100644
> >>> --- a/arch/arm/boot/dts/am43x-epos-evm.dts
> >>> +++ b/arch/arm/boot/dts/am43x-epos-evm.dts
> >>> @@ -319,6 +319,10 @@
> >>>   	phy-mode = "rmii";
> >>>   };
> >>>   
> >>> +&phy_sel {
> >>> +	rmii-clock-ext;
> >>> +};
> >>> +
> >>>   &i2c0 {
> >>>   	status = "okay";
> >>>   	pinctrl-names = "default";
> >>>
> >> Where does this apply on?
> >> With linux-next next-20140506 tag, and this patch applied, I get the
> > Is'nt next-20140506 a month old.
> 
> Uggh.. yeah - 1AM+migraine is not a good combination to try to do
> testing. :( Apologies on the noise
> 
> 
> > I tried the patch on next-20140604.
> 
> Tested on next-20140606 - applies clean, builds and works :)
> 
> am43xx-epos:  Boot PASS: http://slexy.org/raw/s2fT6zs45y
> 
> Tested-by: Nishanth Menon <nm@ti.com>

Applying into omap-for-v3.16/fixes thanks.

Tony