From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] [media] staging: allow omap4iss to be modular
Date: Wed, 11 Jun 2014 09:42:04 -0500 [thread overview]
Message-ID: <53986ABC.4070302@ti.com> (raw)
In-Reply-To: <5192928.MkINji4uKU@wuerfel>
On 06/11/2014 09:35 AM, Arnd Bergmann wrote:
> The OMAP4 camera support depends on I2C and VIDEO_V4L2, both
> of which can be loadable modules. This causes build failures
> if we want the camera driver to be built-in.
>
> This can be solved by turning the option into "tristate",
> which unfortunately causes another problem, because the
> driver incorrectly calls a platform-internal interface
> for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel.
> To work around that, we can export those symbols, but
> that isn't really the correct solution, as we should not
> have dependencies on platform code this way.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> This is one of just two patches we currently need to get
> 'make allmodconfig' to build again on ARM.
>
> diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
> index 751f354..05d2d98 100644
> --- a/arch/arm/mach-omap2/control.c
> +++ b/arch/arm/mach-omap2/control.c
> @@ -190,11 +190,13 @@ u32 omap4_ctrl_pad_readl(u16 offset)
> {
> return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
> }
> +EXPORT_SYMBOL_GPL(omap4_ctrl_pad_readl);
>
> void omap4_ctrl_pad_writel(u32 val, u16 offset)
> {
> writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
> }
> +EXPORT_SYMBOL_GPL(omap4_ctrl_pad_writel);
>
> #ifdef CONFIG_ARCH_OMAP3
>
> diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig
> index 78b0fba..0c3e3c1 100644
> --- a/drivers/staging/media/omap4iss/Kconfig
> +++ b/drivers/staging/media/omap4iss/Kconfig
> @@ -1,5 +1,5 @@
> config VIDEO_OMAP4
> - bool "OMAP 4 Camera support"
> + tristate "OMAP 4 Camera support"
> depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4
> select VIDEOBUF2_DMA_CONTIG
> ---help---
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
This was discussed in detail here:
http://marc.info/?t=140198692500001&r=1&w=2
Direct dependency from a staging driver to mach-omap2 driver is not
something we'd like, right?
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-06-11 14:42 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-11 14:35 [PATCH] [media] staging: allow omap4iss to be modular Arnd Bergmann
2014-06-11 14:42 ` Nishanth Menon [this message]
2014-06-11 14:49 ` Arnd Bergmann
2014-06-11 14:53 ` Nishanth Menon
2014-06-11 15:02 ` Tony Lindgren
2014-06-12 14:12 ` Laurent Pinchart
2014-06-12 14:15 ` Arnd Bergmann
2014-06-12 14:25 ` Greg KH
2014-06-12 14:28 ` Arnd Bergmann
2014-06-12 15:00 ` Laurent Pinchart
2014-06-12 15:59 ` Greg KH
2014-06-11 14:47 ` Tony Lindgren
2014-06-12 14:52 ` Laurent Pinchart
2014-06-12 15:15 ` Tony Lindgren
2014-06-12 15:31 ` Laurent Pinchart
2014-06-13 5:30 ` Tony Lindgren
2014-06-13 6:47 ` Laurent Pinchart
2014-06-13 7:53 ` Tony Lindgren
2014-06-13 10:29 ` Laurent Pinchart
2014-06-13 11:10 ` Tony Lindgren
2014-06-13 13:17 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53986ABC.4070302@ti.com \
--to=nm@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).