From: javier.martinez@collabora.co.uk (Javier Martinez Canillas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3 v4] ARM: DTS: fix the chip select gpios definition in the SPI nodes
Date: Thu, 12 Jun 2014 16:07:53 +0200 [thread overview]
Message-ID: <5399B439.1010300@collabora.co.uk> (raw)
In-Reply-To: <1402578821-27338-3-git-send-email-ch.naveen@samsung.com>
Hello Naveen,
On 06/12/2014 03:13 PM, Naveen Krishna Chatradhi wrote:
> This patch replaces the "cs-gpio" from "controller-data" node
> as was specified in the old binding and use the standard
> "cs-gpios" property expected by the SPI core as is defined in
> the new binding.
>
> Respective changes are preposed to spi-s3c64xx.c driver.
> @ http://www.spinics.net/lists/linux-samsung-soc/msg32282.html
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Tomasz Figa <t.figa@samsung.com>
> ---
> arch/arm/boot/dts/exynos4210-smdkv310.dts | 2 +-
> arch/arm/boot/dts/exynos4412-trats2.dts | 2 +-
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
> index 636d166..9191491 100644
> --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
> +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
> @@ -169,6 +169,7 @@
>
> spi_2: spi at 13940000 {
> status = "okay";
> + cs-gpios = <&gpc1 2 0>;
>
> w25x80 at 0 {
> #address-cells = <1>;
> @@ -178,7 +179,6 @@
> spi-max-frequency = <1000000>;
>
> controller-data {
> - cs-gpio = <&gpc1 2 0>;
> samsung,spi-feedback-delay = <0>;
> };
>
> diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
> index 8a558b7..204b0de 100644
> --- a/arch/arm/boot/dts/exynos4412-trats2.dts
> +++ b/arch/arm/boot/dts/exynos4412-trats2.dts
> @@ -512,6 +512,7 @@
> spi_1: spi at 13930000 {
> pinctrl-names = "default";
> pinctrl-0 = <&spi1_bus>;
> + cs-gpios = <&gpb 5 0>;
> status = "okay";
>
> s5c73m3_spi: s5c73m3 {
> @@ -519,7 +520,6 @@
> spi-max-frequency = <50000000>;
> reg = <0>;
> controller-data {
> - cs-gpio = <&gpb 5 0>;
> samsung,spi-feedback-delay = <2>;
> };
> };
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> index a794a70..0c6433a 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -316,6 +316,7 @@
> };
>
> spi_1: spi at 12d30000 {
> + cs-gpios = <&gpa2 5 0>;
> status = "okay";
>
> w25q80bw at 0 {
> @@ -326,7 +327,6 @@
> spi-max-frequency = <1000000>;
>
> controller-data {
> - cs-gpio = <&gpa2 5 0>;
> samsung,spi-feedback-delay = <0>;
> };
>
>
Looks good to me.
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Best regards,
Javier
next prev parent reply other threads:[~2014-06-12 14:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-12 13:13 [PATCH 1/3 v4] spi: s3c64xx: fix broken "cs_gpios" usage in the driver Naveen Krishna Chatradhi
2014-06-12 13:13 ` [PATCH 2/3 v4] spi: s3c64xx: for DT platofrms always get the chipselect info from DT node Naveen Krishna Chatradhi
2014-06-12 14:06 ` Javier Martinez Canillas
2014-06-12 16:09 ` Naveen Krishna Ch
2014-06-12 23:26 ` Doug Anderson
2014-06-12 13:13 ` [PATCH 3/3 v4] ARM: DTS: fix the chip select gpios definition in the SPI nodes Naveen Krishna Chatradhi
2014-06-12 14:07 ` Javier Martinez Canillas [this message]
2014-06-12 23:14 ` Doug Anderson
2014-06-12 14:00 ` [PATCH 1/3 v4] spi: s3c64xx: fix broken "cs_gpios" usage in the driver Javier Martinez Canillas
2014-06-12 16:06 ` Naveen Krishna Ch
2014-06-12 23:25 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5399B439.1010300@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).