From mboxrd@z Thu Jan 1 00:00:00 1970 From: t-kristo@ti.com (Tero Kristo) Date: Thu, 19 Jun 2014 14:16:32 +0300 Subject: [PATCH v2 10/18] ARM: dts: dra7xx-clocks: Add missing 32khz clocks used for PHY In-Reply-To: <1401345500-20188-11-git-send-email-kishon@ti.com> References: <1401345500-20188-1-git-send-email-kishon@ti.com> <1401345500-20188-11-git-send-email-kishon@ti.com> Message-ID: <53A2C690.1060106@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 05/29/2014 09:38 AM, Kishon Vijay Abraham I wrote: > Added missing 32khz clock used by PCIe PHY. > The documention for this node can be found @ ../bindings/clock/ti/gate.txt. You can drop the node documentation ref, and rather add a TRM reference about hardware details. Other than that, looks good to me. -Tero > > Cc: Tony Lindgren > Cc: Rajendra Nayak > Cc: Tero Kristo > Cc: Paul Walmsley > Cc: Tony Lindgren > Cc: Rob Herring > Cc: Pawel Moll > Cc: Mark Rutland > Cc: Kumar Gala > Signed-off-by: Kishon Vijay Abraham I > --- > arch/arm/boot/dts/dra7xx-clocks.dtsi | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi > index 44993ec..e1bd052 100644 > --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi > +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi > @@ -1165,6 +1165,14 @@ > reg = <0x021c>, <0x0220>; > }; > > + optfclk_pciephy_32khz: optfclk_pciephy_32khz at 4a0093b0 { > + compatible = "ti,gate-clock"; > + clocks = <&sys_32k_ck>; > + #clock-cells = <0>; > + reg = <0x13b0>; > + ti,bit-shift = <8>; > + }; > + > optfclk_pciephy_div: optfclk_pciephy_div at 4a00821c { > compatible = "ti,divider-clock"; > clocks = <&apll_pcie_ck>; >