From mboxrd@z Thu Jan 1 00:00:00 1970 From: yoshihiro.shimoda.uh@renesas.com (Yoshihiro Shimoda) Date: Thu, 26 Jun 2014 11:48:17 +0900 Subject: [PATCH v5 2/2] ARM: shmobile: lager: enable internal PCI In-Reply-To: <201406242202.22807.sergei.shtylyov@cogentembedded.com> References: <201406242157.05973.sergei.shtylyov@cogentembedded.com> <201406242202.22807.sergei.shtylyov@cogentembedded.com> Message-ID: <53AB89F1.8040509@renesas.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Sergei, (2014/06/25 3:02), Sergei Shtylyov wrote: > From: Ben Dooks > > Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to > them. > > Signed-off-by: Ben Dooks > Reviewed-by: Ian Molton > [Sergei: enabled PCI0] > Signed-off-by: Sergei Shtylyov I also tested this patch, and it works. Tested-by: Yoshihiro Shimoda Best regards, Yoshihiro shimoda > --- > Changes in version 4: > - refreshed the patch. > > Changes in version 3: > - refreshed the patch. > > Changes in version 2: > - enabled PCI0 device; > - reworded summary and changelog; > - refreshed the patch. > > arch/arm/boot/dts/r8a7790-lager.dts | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > Index: renesas/arch/arm/boot/dts/r8a7790-lager.dts > =================================================================== > --- renesas.orig/arch/arm/boot/dts/r8a7790-lager.dts > +++ renesas/arch/arm/boot/dts/r8a7790-lager.dts > @@ -219,6 +219,21 @@ > renesas,groups = "i2c3"; > renesas,function = "i2c3"; > }; > + > + usb0_pins: usb0 { > + renesas,groups = "usb0"; > + renesas,function = "usb0"; > + }; > + > + usb1_pins: usb1 { > + renesas,groups = "usb1"; > + renesas,function = "usb1"; > + }; > + > + usb2_pins: usb2 { > + renesas,groups = "usb2"; > + renesas,function = "usb2"; > + }; > }; > > ðer { > @@ -368,3 +383,21 @@ > regulator-always-on; > }; > }; > + > +&pci0 { > + status = "okay"; > + pinctrl-0 = <&usb0_pins>; > + pinctrl-names = "default"; > +}; > + > +&pci1 { > + status = "okay"; > + pinctrl-0 = <&usb1_pins>; > + pinctrl-names = "default"; > +}; > + > +&pci2 { > + status = "okay"; > + pinctrl-0 = <&usb2_pins>; > + pinctrl-names = "default"; > +}; > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >