linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH CFT 12/30] net: fec: ensure fec_enet_free_buffers() properly cleans the rings
Date: Fri, 27 Jun 2014 22:48:42 +0400	[thread overview]
Message-ID: <53ADBC8A.8070103@cogentembedded.com> (raw)
In-Reply-To: <E1X0XwQ-0001Na-Kg@rmk-PC.arm.linux.org.uk>

Hello.

On 06/27/2014 07:19 PM, Russell King wrote:

> Ensure that we do not double-free any allocations, and that any transmit
> skbuffs are properly freed when we clean up the rings.

> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> ---
>   drivers/net/ethernet/freescale/fec_main.c | 8 +++++++-
>   1 file changed, 7 insertions(+), 1 deletion(-)

> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 9c5570a3e32e..8024b7a8e7f4 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -2079,8 +2079,14 @@ static void fec_enet_free_buffers(struct net_device *ndev)
>   	}
>
>   	bdp = fep->tx_bd_base;
> -	for (i = 0; i < fep->tx_ring_size; i++)
> +	for (i = 0; i < fep->tx_ring_size; i++) {
>   		kfree(fep->tx_bounce[i]);
> +		fep->tx_bounce[i] = NULL;
> +		skb = fep->tx_skbuff[i];
> +		fep->tx_skbuff[i] = NULL;
> +		if (skb)
> +			dev_kfree_skb(skb);

    dev_kfree_skb() (actually, consume_skb() that it calls) already checks 
'skb' for NULL.

WBR, Sergei

  reply	other threads:[~2014-06-27 18:48 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-27 15:15 [PATCH CFT 00/30] Initial round of Freescale FEC ethernet patches Russell King - ARM Linux
2014-06-27 15:18 ` [PATCH CFT 01/30] net: fec: Don't clear IPV6 header checksum field when IP accelerator enable Russell King
2014-06-27 15:19 ` [PATCH CFT 02/30] net: fec: iMX6 FEC does not support half-duplex gigabit Russell King
2014-07-08  6:46   ` Uwe Kleine-König
2014-07-08 11:47     ` Russell King - ARM Linux
2014-06-27 15:19 ` [PATCH CFT 03/30] net: fec: fix ethtool set_pauseparam duplex bug Russell King
2014-06-27 15:19 ` [PATCH CFT 04/30] net: fec: fix interrupt handling races Russell King
2014-06-27 15:19 ` [PATCH CFT 05/30] net: fec: use netif_tx_disable() rather than netif_stop_queue() Russell King
2014-06-27 15:19 ` [PATCH CFT 06/30] net: fec: remove checking for NULL phy_dev in fec_enet_close() Russell King
2014-06-27 15:19 ` [PATCH CFT 07/30] net: fec: ensure that a disconnected phy isn't configured Russell King
2014-06-27 15:19 ` [PATCH CFT 08/30] net: fec: stop the phy before shutting down the MAC Russell King
2014-06-27 15:19 ` [PATCH CFT 09/30] net: fec: remove useless fep->opened Russell King
2014-06-27 15:19 ` [PATCH CFT 10/30] net: fec: make rx skb handling more robust Russell King
2014-06-27 15:19 ` [PATCH CFT 11/30] net: fec: clean up transmit descriptor setup Russell King
2014-06-27 15:19 ` [PATCH CFT 12/30] net: fec: ensure fec_enet_free_buffers() properly cleans the rings Russell King
2014-06-27 18:48   ` Sergei Shtylyov [this message]
2014-07-01 14:48     ` Russell King - ARM Linux
2014-06-27 15:19 ` [PATCH CFT 13/30] net: fec: fix missing kmalloc() failure check in fec_enet_alloc_buffers() Russell King
2014-06-27 15:20 ` [PATCH CFT 14/30] net: fec: improve safety of suspend/resume/transmit timeout paths Russell King
2014-06-27 15:20 ` [PATCH CFT 15/30] net: fec: ensure fec_enet_close() copes with resume failure Russell King
2014-06-27 15:20 ` [PATCH CFT 16/30] net: fec: only restart or stop the device if it is present and running Russell King
2014-06-27 15:20 ` [PATCH CFT 17/30] net: fec: move calls to quiesce/resume packet processing out of fec_restart() Russell King
2014-06-27 15:20 ` [PATCH CFT 18/30] net: fec: remove inappropriate calls around fec_restart() Russell King
2014-06-27 15:20 ` [PATCH CFT 19/30] net: fec: quiesce packet processing before stopping device in fec_suspend() Russell King
2014-06-27 15:20 ` [PATCH CFT 20/30] net: fec: quiesce packet processing before stopping device in fec_set_features() Russell King
2014-06-27 15:20 ` [PATCH CFT 21/30] net: fec: quiesce packet processing before changing features Russell King
2014-06-27 15:20 ` [PATCH CFT 22/30] net: fec: quiesce packet processing when taking link down in fec_enet_adjust_link() Russell King
2014-06-27 15:20 ` [PATCH CFT 23/30] net: fec: clean up duplex mode handling Russell King
2014-06-27 15:20 ` [PATCH CFT 24/30] net: fec: better implementation of iMX6 ERR006358 quirk Russell King
2014-06-27 15:21 ` [PATCH CFT 25/30] net: fec: replace delayed work with standard work Russell King
2014-06-27 15:21 ` [PATCH CFT 26/30] net: fec: clear receive interrupts before processing a packet Russell King
2014-06-27 15:40   ` Russell King - ARM Linux
2014-06-27 15:21 ` [PATCH CFT 27/30] net: fec: reorder ethtool ops to match order in struct declaration Russell King
2014-06-27 15:21 ` [PATCH CFT 28/30] net: fec: add support for dumping transmit ring on timeout Russell King
2014-06-27 15:21 ` [PATCH CFT 29/30] net: fec: remove useless status check in tx reap path Russell King
2014-06-27 15:21 ` [PATCH CFT 30/30] net: fec: consolidate hwtstamp implementation Russell King
2014-07-01 14:21 ` [PATCH CFT 00/30] Initial round of Freescale FEC ethernet patches Nathan Lynch
2014-07-01 14:34   ` Russell King - ARM Linux
2014-07-01 14:56     ` Nathan Lynch
2014-07-07 21:41 ` Russell King - ARM Linux
2014-07-07 22:45   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53ADBC8A.8070103@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).