From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Wed, 02 Jul 2014 11:14:43 +0200 Subject: [PATCH] ARM: cpu_pj4b_suspend_size should base on cpu_v7_suspend_size In-Reply-To: <1404283715-3631-1-git-send-email-shawn.guo@freescale.com> References: <1404283715-3631-1-git-send-email-shawn.guo@freescale.com> Message-ID: <53B3CD83.5010301@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Shawn, On 02/07/2014 08:48, Shawn Guo wrote: > Since pj4b suspend/resume routines are implemented based on generic > ARMv7 ones, instead of hard-coding cpu_pj4b_suspend_size, we should have > it be cpu_v7_suspend_size plus pj4b specific bytes. Otherwise, if > cpu_v7_suspend_size gets updated alone, the pj4b suspend/resume will > likely be broken. > > While at it, fix the comments in cpu_pj4b_do_resume, as we're restoring > CP15 registers rather than saving in there. > > Signed-off-by: Shawn Guo Acked-by: Gregory CLEMENT and Tested-by: Gregory CLEMENT Thanks, Gregory > --- > Completely untested. > > arch/arm/mm/proc-v7.S | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S > index 3db2c2f04a30..604dda5f65cc 100644 > --- a/arch/arm/mm/proc-v7.S > +++ b/arch/arm/mm/proc-v7.S > @@ -184,16 +184,16 @@ ENDPROC(cpu_pj4b_do_suspend) > > ENTRY(cpu_pj4b_do_resume) > ldmia r0!, {r6 - r10} > - mcr p15, 1, r6, c15, c1, 0 @ save CP15 - extra features > - mcr p15, 1, r7, c15, c2, 0 @ save CP15 - Aux Func Modes Ctrl 0 > - mcr p15, 1, r8, c15, c1, 2 @ save CP15 - Aux Debug Modes Ctrl 2 > - mcr p15, 1, r9, c15, c1, 1 @ save CP15 - Aux Debug Modes Ctrl 1 > - mcr p15, 0, r10, c9, c14, 0 @ save CP15 - PMC > + mcr p15, 1, r6, c15, c1, 0 @ retore CP15 - extra features > + mcr p15, 1, r7, c15, c2, 0 @ retore CP15 - Aux Func Modes Ctrl 0 > + mcr p15, 1, r8, c15, c1, 2 @ retore CP15 - Aux Debug Modes Ctrl 2 > + mcr p15, 1, r9, c15, c1, 1 @ retore CP15 - Aux Debug Modes Ctrl 1 > + mcr p15, 0, r10, c9, c14, 0 @ retore CP15 - PMC > b cpu_v7_do_resume > ENDPROC(cpu_pj4b_do_resume) > #endif > .globl cpu_pj4b_suspend_size > -.equ cpu_pj4b_suspend_size, 4 * 14 > +.equ cpu_pj4b_suspend_size, cpu_v7_suspend_size + 4 * 5 > > #endif > > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com