From: javier.martinez@collabora.co.uk (Javier Martinez Canillas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 23/24] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock
Date: Mon, 07 Jul 2014 08:57:41 +0200 [thread overview]
Message-ID: <53BA44E5.6070604@collabora.co.uk> (raw)
In-Reply-To: <1404713210.4367.0.camel@AMDC1943>
Hello Krzysztof,
On 07/07/2014 08:06 AM, Krzysztof Kozlowski wrote:
> On pi?, 2014-07-04 at 22:24 +0200, Javier Martinez Canillas wrote:
>> The MAX7802 PMIC has a Real-Time-Clock (RTC) with two alarms.
>> This patch adds support for the RTC and is based on a driver
>> added by Simon Glass to the Chrome OS kernel 3.8 tree.
>>
>> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>> ---
>>
>> Changes since v6:
>> - Remove unused code for SMPL and WTSR. Suggested by Krzysztof Kozlowski.
>> - Don't spam the kernel log with unimportant info and just print for debug.
>> Suggested by Krzysztof Kozlowski.
>> - Use ARRAY_SIZE() instead of constant value. Suggested by Krzysztof Kozlowski.
>> - Remove duplicated register setup. Suggested by Krzysztof Kozlowski.
>> - Don't free/unregister managed allocated resources.
>> Suggested by Krzysztof Kozlowski.
>> ---
>> drivers/rtc/Kconfig | 10 +
>> drivers/rtc/Makefile | 1 +
>> drivers/rtc/rtc-max77802.c | 508 +++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 519 insertions(+)
>> create mode 100644 drivers/rtc/rtc-max77802.c
>
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
Thanks a lot for the review and for all the feedback you gave me on each version
of the series.
> Best regards,
> Krzysztof
>
>
Best regards,
Javier
next prev parent reply other threads:[~2014-07-07 6:57 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 20:24 [PATCH v7 00/24] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 01/24] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-07-18 8:17 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 02/24] mfd: max77686: Add power management support Javier Martinez Canillas
2014-07-09 14:44 ` Lee Jones
2014-07-18 8:17 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 03/24] mfd: max77686: Don't define dummy function if OF isn't enabled Javier Martinez Canillas
2014-07-09 14:50 ` Lee Jones
2014-07-18 8:17 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 04/24] mfd: max77686: Make platform data over-rule DT Javier Martinez Canillas
2014-07-09 14:52 ` Lee Jones
2014-07-09 18:15 ` Javier Martinez Canillas
2014-07-18 8:17 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 05/24] mfd: max77686: Return correct error when pdata isn't found Javier Martinez Canillas
2014-07-09 14:53 ` Lee Jones
2014-07-18 8:18 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 06/24] mfd: max77686: Make error checking consistent Javier Martinez Canillas
2014-07-09 14:54 ` Lee Jones
2014-07-18 8:18 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 07/24] mfd: max77686: Remove unneeded OOM error message Javier Martinez Canillas
2014-07-18 8:18 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 08/24] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support Javier Martinez Canillas
2014-07-09 15:13 ` Lee Jones
2014-07-09 18:40 ` Javier Martinez Canillas
2014-07-10 9:59 ` amit daniel kachhap
2014-07-11 1:45 ` Javier Martinez Canillas
2014-07-11 4:02 ` Doug Anderson
2014-07-11 9:37 ` amit daniel kachhap
2014-07-11 9:43 ` Tomasz Figa
2014-07-11 10:15 ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 09/24] rtc: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR Javier Martinez Canillas
2014-07-07 6:09 ` Krzysztof Kozlowski
2014-07-04 20:24 ` [PATCH v7 11/24] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 12/24] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 13/24] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 14/24] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 15/24] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 16/24] regulator: max77686: Setup DVS-related GPIOs on probe Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 17/24] mfd: max77686: Add documentation for DVS bindings Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 18/24] mfd: max77686: Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-09 15:31 ` Lee Jones
2014-07-09 18:43 ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 19/24] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 20/24] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 21/24] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 22/24] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 23/24] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-07-07 6:06 ` Krzysztof Kozlowski
2014-07-07 6:57 ` Javier Martinez Canillas [this message]
2014-07-04 20:24 ` [PATCH v7 24/24] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53BA44E5.6070604@collabora.co.uk \
--to=javier.martinez@collabora.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).