linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/4] can: flexcan: add vf610 support for FlexCAN
Date: Mon, 28 Jul 2014 18:28:54 +0200	[thread overview]
Message-ID: <53D67A46.3060202@pengutronix.de> (raw)
In-Reply-To: <e88108c655e2c16dc9cf6c4194547e73@agner.ch>

On 07/28/2014 06:20 PM, Stefan Agner wrote:
>>> Ping. Anything open/to do from my side?
>>
>> Please keep the printing of esr and ctrl in the interrupt handler, add a
>> #define DEBUG in the driver, but do not change anything else. Then:
                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
> index 1c31a5d..fe8b81c 100644
> --- a/drivers/net/can/flexcan.c
> +++ b/drivers/net/can/flexcan.c
> @@ -19,6 +19,7 @@
>   *
>   */
>  
> +#define DEBUG

keep

>  #include <linux/netdevice.h>
>  #include <linux/can.h>
>  #include <linux/can/dev.h>
> @@ -743,6 +744,9 @@ static irqreturn_t flexcan_irq(int irq, void
> *dev_id)
>  
>         reg_iflag1 = flexcan_read(&regs->iflag1);
>         reg_esr = flexcan_read(&regs->esr);
> +
> +       printk("flexcan_irq, esr=%08x\n", reg_esr);
> +       printk("flexcan_irq, ctrl=%08x\n", flexcan_read(&regs->ctrl));

keep

>         /* ACK all bus error and state change IRQ sources */
>         if (reg_esr & FLEXCAN_ESR_ALL_INT)
>                 flexcan_write(reg_esr & FLEXCAN_ESR_ALL_INT,
> &regs->esr);
> @@ -885,8 +889,8 @@ static int flexcan_chip_start(struct net_device
> *dev)
>          */
>         reg_ctrl = flexcan_read(&regs->ctrl);
>         reg_ctrl &= ~FLEXCAN_CTRL_TSYN;
> -       reg_ctrl |= FLEXCAN_CTRL_BOFF_REC | FLEXCAN_CTRL_LBUF |
> -               FLEXCAN_CTRL_ERR_STATE;
> +       reg_ctrl |= FLEXCAN_CTRL_BOFF_REC | FLEXCAN_CTRL_LBUF;// |
> +               //FLEXCAN_CTRL_ERR_STATE;
>         /*
>          * enable the "error interrupt" (FLEXCAN_CTRL_ERR_MSK),
>          * on most Flexcan cores, too. Otherwise we don't get
> 
> I'm not sure whether you really want to keep the FLEXCAN_CTRL_ERR_STATE
> commented out...

No, please remove this change and redo the test.

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 242 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140728/af1eab34/attachment.sig>

  reply	other threads:[~2014-07-28 16:28 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-15 12:56 [PATCH v3 0/4] ARM: vf610: add FlexCAN support Stefan Agner
2014-07-15 12:56 ` [PATCH v3 1/4] ARM: dts: vf610: add FlexCAN node Stefan Agner
2014-07-15 12:56 ` [PATCH v3 2/4] ARM: imx: clk-vf610: fix FlexCAN clock gating Stefan Agner
2014-07-15 12:56 ` [PATCH v3 3/4] can: flexcan: switch on clocks before accessing ecr register Stefan Agner
2014-07-15 13:54   ` Lothar Waßmann
2014-07-15 13:57     ` Marc Kleine-Budde
2014-07-15 12:56 ` [PATCH v3 4/4] can: flexcan: add vf610 support for FlexCAN Stefan Agner
2014-07-15 14:24   ` Marc Kleine-Budde
2014-07-16  6:43     ` Stefan Agner
2014-07-25 10:50       ` Stefan Agner
2014-07-25 13:33         ` Marc Kleine-Budde
2014-07-28 16:20           ` Stefan Agner
2014-07-28 16:28             ` Marc Kleine-Budde [this message]
2014-07-29  7:29               ` Stefan Agner
2014-07-30 11:47                 ` Marc Kleine-Budde
2014-08-04 13:43                   ` Stefan Agner
2014-08-04 14:27                     ` Marc Kleine-Budde
2014-08-04 16:01                       ` Stefan Agner
2014-08-05  9:52                         ` Marc Kleine-Budde
2014-08-05 12:38                           ` Stefan Agner
2014-08-14 10:38                         ` Marc Kleine-Budde
2014-07-28 16:31             ` Marc Kleine-Budde
2014-07-15 13:54 ` [PATCH v3 0/4] ARM: vf610: add FlexCAN support Marc Kleine-Budde
2014-08-14 10:04   ` Marc Kleine-Budde
2014-07-16  6:11 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53D67A46.3060202@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).