* [GIT PULL] Samsung 2nd DT updates for v3.17
@ 2014-07-31 18:20 Kukjin Kim
2014-07-31 18:27 ` Kukjin Kim
2014-08-01 3:19 ` Olof Johansson
0 siblings, 2 replies; 3+ messages in thread
From: Kukjin Kim @ 2014-07-31 18:20 UTC (permalink / raw)
To: linux-arm-kernel
The following changes since commit 6da287ad0266cca1fa8f88fb8b1c466e8164671f:
Merge branch 'v3.17-next/power-exynos' into v3.17-next/dt-samsung-2
(2014-07-29 06:09:42 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/samsung-dt-2
for you to fetch changes up to a9408a6bba0de106d702fe5fa36fdc545116e9ab:
ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 (2014-07-30
07:57:32 +0900)
----------------------------------------------------------------
Samsung DT 2nd updates for v3.17
This is based on tags/exynos-power because this DT changes
are depending PMU cleanup.
Fixes boot for exynos5260 and exynos5410,
- Since exynos cannot boot without obtaining PMU address via
DT from now on, add PMU node for exynos5260 and exynos5410
For preparing exynos5250-spring,
- move max77686 and cypress,cyapa trackpad from exynos5250-
cros-common to exynos5250-snow DT file
(Note exynos5250-spring is not included in this branch yet)
For exynos3250,
- add TMU node and remove duplicated interrupt-parent
- add missing pinctrl property for uart0 and uart1
For exynos5250-smdk5250 board
- add max77686 pmic interrupt property which is connected to
gpx3
----------------------------------------------------------------
Andreas Faerber (5):
ARM: dts: Document exynos5410 PMU
ARM: dts: Add PMU to exynos5410
ARM: EXYNOS: Add support for Exynos5410 PMU
ARM: dts: max77686 is exynos5250-snow only
ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only
Chanwoo Choi (3):
ARM: dts: Add TMU dt node to monitor the temperature for exynos3250
ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250
ARM: dts: Add missing pinctrl for uart0/1 for exynos3250
Thomas Abraham (1):
ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250
Vikas Sajjan (2):
ARM: dts: Add PMU DT node for exynos5260 SoC
ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table
.../devicetree/bindings/arm/samsung/pmu.txt | 2 +
arch/arm/boot/dts/exynos3250.dtsi | 15 +-
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 159
--------------------
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +
arch/arm/boot/dts/exynos5250-snow.dts | 165
+++++++++++++++++++++
arch/arm/boot/dts/exynos5260.dtsi | 5 +
arch/arm/boot/dts/exynos5410.dtsi | 5 +
arch/arm/mach-exynos/exynos.c | 2 +
8 files changed, 194 insertions(+), 161 deletions(-)
^ permalink raw reply [flat|nested] 3+ messages in thread* [GIT PULL] Samsung 2nd DT updates for v3.17
2014-07-31 18:20 [GIT PULL] Samsung 2nd DT updates for v3.17 Kukjin Kim
@ 2014-07-31 18:27 ` Kukjin Kim
2014-08-01 3:19 ` Olof Johansson
1 sibling, 0 replies; 3+ messages in thread
From: Kukjin Kim @ 2014-07-31 18:27 UTC (permalink / raw)
To: linux-arm-kernel
On 08/01/14 03:20, Kukjin Kim wrote:
Hi Arnd and Olof,
Probably you may see merge conflict when you merge this branch into
arm-soc because of cros-ec-keyboard related patches from Stephen.
Here is my preferred resolution.
diff --cc arch/arm/boot/dts/exynos5250-snow.dts
index c682c88,7c4bdaa..f2b8c41
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@@ -344,4 -433,167 +344,169 @@@
};
};
+ &i2c_0 {
+ max77686 at 09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ &i2c_1 {
+ trackpad {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 0>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
+ };
+
+ &pinctrl_0 {
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
++
+#include "cros-ec-keyboard.dtsi"
Thanks,
Kukjin
> The following changes since commit
> 6da287ad0266cca1fa8f88fb8b1c466e8164671f:
>
> Merge branch 'v3.17-next/power-exynos' into v3.17-next/dt-samsung-2
> (2014-07-29 06:09:42 +0900)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> tags/samsung-dt-2
>
> for you to fetch changes up to a9408a6bba0de106d702fe5fa36fdc545116e9ab:
>
> ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 (2014-07-30
> 07:57:32 +0900)
>
> ----------------------------------------------------------------
> Samsung DT 2nd updates for v3.17
>
> This is based on tags/exynos-power because this DT changes
> are depending PMU cleanup.
>
> Fixes boot for exynos5260 and exynos5410,
> - Since exynos cannot boot without obtaining PMU address via
> DT from now on, add PMU node for exynos5260 and exynos5410
>
> For preparing exynos5250-spring,
> - move max77686 and cypress,cyapa trackpad from exynos5250-
> cros-common to exynos5250-snow DT file
> (Note exynos5250-spring is not included in this branch yet)
>
> For exynos3250,
> - add TMU node and remove duplicated interrupt-parent
> - add missing pinctrl property for uart0 and uart1
>
> For exynos5250-smdk5250 board
> - add max77686 pmic interrupt property which is connected to
> gpx3
>
> ----------------------------------------------------------------
> Andreas Faerber (5):
> ARM: dts: Document exynos5410 PMU
> ARM: dts: Add PMU to exynos5410
> ARM: EXYNOS: Add support for Exynos5410 PMU
> ARM: dts: max77686 is exynos5250-snow only
> ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only
>
> Chanwoo Choi (3):
> ARM: dts: Add TMU dt node to monitor the temperature for exynos3250
> ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250
> ARM: dts: Add missing pinctrl for uart0/1 for exynos3250
>
> Thomas Abraham (1):
> ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250
>
> Vikas Sajjan (2):
> ARM: dts: Add PMU DT node for exynos5260 SoC
> ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table
>
> .../devicetree/bindings/arm/samsung/pmu.txt | 2 +
> arch/arm/boot/dts/exynos3250.dtsi | 15 +-
> arch/arm/boot/dts/exynos5250-cros-common.dtsi | 159 --------------------
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +
> arch/arm/boot/dts/exynos5250-snow.dts | 165 +++++++++++++++++++++
> arch/arm/boot/dts/exynos5260.dtsi | 5 +
> arch/arm/boot/dts/exynos5410.dtsi | 5 +
> arch/arm/mach-exynos/exynos.c | 2 +
> 8 files changed, 194 insertions(+), 161 deletions(-)
^ permalink raw reply [flat|nested] 3+ messages in thread* [GIT PULL] Samsung 2nd DT updates for v3.17
2014-07-31 18:20 [GIT PULL] Samsung 2nd DT updates for v3.17 Kukjin Kim
2014-07-31 18:27 ` Kukjin Kim
@ 2014-08-01 3:19 ` Olof Johansson
1 sibling, 0 replies; 3+ messages in thread
From: Olof Johansson @ 2014-08-01 3:19 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jul 31, 2014 at 11:20 AM, Kukjin Kim <kgene.kim@samsung.com> wrote:
> The following changes since commit 6da287ad0266cca1fa8f88fb8b1c466e8164671f:
>
> Merge branch 'v3.17-next/power-exynos' into v3.17-next/dt-samsung-2
> (2014-07-29 06:09:42 +0900)
>
> are available in the git repository at:
>
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> tags/samsung-dt-2
>
> for you to fetch changes up to a9408a6bba0de106d702fe5fa36fdc545116e9ab:
>
> ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 (2014-07-30
> 07:57:32 +0900)
These are mostly fixes and not new stuff, so I have merged them into
next/dt now.
-Olof
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-08-01 3:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-31 18:20 [GIT PULL] Samsung 2nd DT updates for v3.17 Kukjin Kim
2014-07-31 18:27 ` Kukjin Kim
2014-08-01 3:19 ` Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox