From mboxrd@z Thu Jan 1 00:00:00 1970 From: tomasz.figa@gmail.com (Tomasz Figa) Date: Sat, 02 Aug 2014 14:56:19 +0200 Subject: [PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow In-Reply-To: <53DCD7D7.2070208@gmail.com> References: <1406940750-15880-1-git-send-email-afaerber@suse.de> <1406940750-15880-5-git-send-email-afaerber@suse.de> <53DCD7D7.2070208@gmail.com> Message-ID: <53DCDFF3.7030909@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 02.08.2014 14:21, Tomasz Figa wrote: > On 02.08.2014 02:52, Andreas F?rber wrote: >> Use the new style of referencing inherited nodes and use symbolic names. >> Reorder one pinctrl node in GPIO order. >> >> Goal is the alignment of all exynos5250 based device trees for comparison. >> >> Suggested-by: Doug Anderson >> Reviewed-by: Doug Anderson >> Signed-off-by: Andreas F?rber >> --- >> v5 -> v6: >> * Split off label additions (Doug Anderson) >> * Fixed alphabetical order of sd3_* nodes (Doug Anderson) >> >> v4 -> v5: >> * Introduced labels to consistently use new referencing style (Tomasz Figa) >> * Use IRQ_TYPE_* constants >> * Use some more GPIO_ACTIVE_* >> >> v3 -> v4: Unchanged >> >> v3: New (Doug Anderson) >> >> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++----------------- >> 1 file changed, 145 insertions(+), 146 deletions(-) > > Reviewed-by: Tomasz Figa Just for convenience of other reviewers, here are actual changes done do the device tree after compiling into dtb and then back into dts: > --- exynos5250-snow.dtb.dts 2014-08-02 14:54:15.145905921 +0200 > +++ ../dtbs.post/exynos5250-snow.dtb.dts 2014-08-02 14:54:15.146905921 +0200 > @@ -8,6 +8,7 @@ > model = "Google Snow"; > > chosen { > + bootargs = "console=tty1"; > }; > > aliases { > @@ -829,15 +830,6 @@ > phandle = <0x44>; > }; > > - hdmi-hpd-irq { > - samsung,pins = "gpx3-7"; > - samsung,pin-function = <0x0>; > - samsung,pin-pud = <0x1>; > - samsung,pin-drv = <0x0>; > - linux,phandle = <0x33>; > - phandle = <0x33>; > - }; > - > max77686-irq { > samsung,pins = "gpx3-2"; > samsung,pin-function = <0x0>; > @@ -846,6 +838,15 @@ > linux,phandle = <0xe>; > phandle = <0xe>; > }; > + > + hdmi-hpd-irq { > + samsung,pins = "gpx3-7"; > + samsung,pin-function = <0x0>; > + samsung,pin-pud = <0x1>; > + samsung,pin-drv = <0x0>; > + linux,phandle = <0x33>; > + phandle = <0x33>; > + }; > }; > > pinctrl at 13400000 { > @@ -1703,12 +1704,12 @@ > samsung,dw-mshc-ciu-div = <0x3>; > samsung,dw-mshc-sdr-timing = <0x2 0x3>; > samsung,dw-mshc-ddr-timing = <0x1 0x2>; > + pinctrl-names = "default"; > + pinctrl-0 = <0x27 0x28 0x29>; > > slot at 0 { > reg = <0x0>; > bus-width = <0x4>; > - pinctrl-names = "default"; > - pinctrl-0 = <0x27 0x28 0x29>; > }; > }; > Best regards, Tomasz