[PATCH v6 07/10] ARM: dts: Clean up exynos5250-arndale

[tomasz.figa@gmail.com (Tomasz Figa)]

On 02.08.2014 02:52, Andreas F?rber wrote:
> Use the new style of referencing inherited nodes, use symbolic names,
> tidy indentation and reorder includes.
> 
> Goal is the alignment of all exynos5250 based device trees for comparison.
> 
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
>  v5 -> v6:
>  * Updated for mfc node label
>  
>  v5: New
>  Aligns with SMDK.
> 
>  arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++---------------
>  1 file changed, 466 insertions(+), 463 deletions(-)
> 

Diff in resulting dtb:

> --- exynos5250-arndale.dtb.dts	2014-08-02 14:54:15.102905920 +0200
> +++ ../dtbs.post/exynos5250-arndale.dtb.dts	2014-08-02 14:54:15.104905920 +0200
> @@ -1977,7 +1977,7 @@
>  		clocks = <0x2 0x158 0x2 0x88 0x2 0x89 0x2 0x9f 0x2 0x400>;
>  		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi";
>  		samsung,syscon-phandle = <0x7>;
> -		hpd-gpio = <0xc 0x7 0x2>;
> +		hpd-gpio = <0xc 0x7 0x1>;
>  		vdd_osc-supply = <0x31>;
>  		vdd_pll-supply = <0x32>;
>  		vdd-supply = <0x32>;
> @@ -2104,15 +2104,9 @@
>  		};
>  	};
>  
> -	usb_hub_bus {
> -		compatible = "simple-bus";
> -		#address-cells = <0x1>;
> -		#size-cells = <0x0>;
> -
> -		usb_hub {
> -			compatible = "smsc,usb3503a";
> -			reset-gpios = <0xc 0x5 0x1>;
> -			connect-gpios = <0x10 0x7 0x1>;
> -		};
> +	usb-hub {
> +		compatible = "smsc,usb3503a";
> +		reset-gpios = <0xc 0x5 0x1>;
> +		connect-gpios = <0x10 0x7 0x1>;
>  	};
>  };

Reviewed-by: Tomasz Figa <t.figa@samsung.com>

Best regards,
Tomasz