From mboxrd@z Thu Jan  1 00:00:00 1970
From: varkabhadram@gmail.com (Varka Bhadram)
Date: Tue, 05 Aug 2014 17:29:10 +0530
Subject: [PATCH v2 1/2] dma: Add Xilinx Central DMA DT Binding
 Documentation
In-Reply-To: <1407238791-3370-1-git-send-email-sthokal@xilinx.com>
References: <1407238791-3370-1-git-send-email-sthokal@xilinx.com>
Message-ID: <53E0C70E.2010603@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 08/05/2014 05:09 PM, Srikanth Thokala wrote:
> Device-tree binding documentation of Xilinx Central DMA Engine
>
> Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
> ---
> Changes in v2:
> - Change property 'xlnx,data-width' to 'xlnx,datawidth' in the description
>    to match the implementation.
>
> ---
>   .../devicetree/bindings/dma/xilinx/xilinx_cdma.txt |   54 ++++++++++++++++++++
>   1 file changed, 54 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/dma/xilinx/xilinx_cdma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_cdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_cdma.txt
> new file mode 100644
> index 0000000..b04f76b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_cdma.txt
> @@ -0,0 +1,54 @@
> +Xilinx AXI CDMA engine, it does transfers between memory-mapped source
> +address and a memory-mapped destination address.
> +
> +Required properties:
> +- compatible: Should be "xlnx,axi-cdma-1.00.a"
> +- #dma-cells: Should be <1>, see "dmas" property below
> +- reg: Should contain cdma registers location and length.
> +- dma-channel child node: Should have only one channel
> +
> +

proper alignment for all the properties...
Required properties:
- compatible	: Should be "xlnx,axi-cdma-1.00.a"
- #dma-cells	: Should be <1>, see "dmas" property below
- reg		: Should contain cdma registers location and length.
.....



-- 
Regards,
Varka Bhadram.