From mboxrd@z Thu Jan 1 00:00:00 1970 From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth) Date: Sun, 10 Aug 2014 14:16:32 +0200 Subject: [PATCH 1/6] ARM: mvebu: Add required ethernet muxing for the Armada 370 SoC In-Reply-To: <1407511136-26477-2-git-send-email-ezequiel.garcia@free-electrons.com> References: <1407511136-26477-1-git-send-email-ezequiel.garcia@free-electrons.com> <1407511136-26477-2-git-send-email-ezequiel.garcia@free-electrons.com> Message-ID: <53E762A0.5070900@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 08/08/2014 05:18 PM, Ezequiel Garcia wrote: > This commit adds the required pin muxing for the two network interfaces > and the MDIO interface, to the Armada 370 SoC. > > Signed-off-by: Ezequiel Garcia > --- > arch/arm/boot/dts/armada-370.dtsi | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi > index 21b588b..b0700bf6 100644 > --- a/arch/arm/boot/dts/armada-370.dtsi > +++ b/arch/arm/boot/dts/armada-370.dtsi > @@ -151,6 +151,25 @@ > "mpp62", "mpp60", "mpp58"; > marvell,function = "audio"; > }; > + > + mdio_pins: mdio_pins { Ezequiel, please keep me posted next time ;) Above should be: mdio_pins: mdio-pins { same for the ones below. > + marvell,pins = "mpp17", "mpp18"; > + marvell,function = "ge"; As we haven't used it before, we could still rename "ge" function to more approprate "mdio"... but it is ok. Besides the comments, Acked-by: Sebastian Hesselbarth > + }; > + > + ge0_pins: ge0_pins { > + marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8", > + "mpp9", "mpp10", "mpp11", "mpp12", > + "mpp13", "mpp14", "mpp15", "mpp16"; > + marvell,function = "ge0"; > + }; > + > + ge1_pins: ge1_pins { > + marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22", > + "mpp23", "mpp24", "mpp25", "mpp26", > + "mpp27", "mpp28", "mpp29", "mpp30"; > + marvell,function = "ge1"; > + }; > }; > > gpio0: gpio at 18100 { >