linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/7] ARM: meson: update documentation (uart, timer and vendors)
Date: Mon, 18 Aug 2014 12:36:47 +0200	[thread overview]
Message-ID: <53F1D73F.8010204@gmail.com> (raw)
In-Reply-To: <1408272594-10814-8-git-send-email-carlo@caione.org>



On 17/08/14 12:49, Carlo Caione wrote:
> New UART and timer bindings are documented. A new vendor is added to the
> vendors list.
>
> Signed-off-by: Carlo Caione <carlo@caione.org>
> ---
>   .../devicetree/bindings/serial/amlogic,meson-uart.txt   | 17 +++++++++++++++++
>   .../devicetree/bindings/timer/amlogic,meson6-timer.txt  | 16 ++++++++++++++++
>   Documentation/devicetree/bindings/vendor-prefixes.txt   |  1 +
>   3 files changed, 34 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
>   create mode 100644 Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt

This should be three patches for the different files. It might happen, 
that for example your timer driver get merged through a different tree 
then arm-soc. For the merge, the driver and the documentation should go 
togehter.

>
> diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
> new file mode 100644
> index 0000000..fa1935a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
> @@ -0,0 +1,17 @@
> +Amlogic Meson UART
> +
> +Required properties:
> +- compatible : Should be "amlogic,meson-uart"
> +- reg : Address and length of the register set
> +- interrupts : Should contain uart interrupt
> +- clocks: phandle to the source clock
> +
> +Example:
> +
> +uart0: serial at c81004c0 {
> +	compatible = "amlogic,meson-uart";
> +	reg = <0xc81004c0 0x14>;
> +	interrupts = <0 90 1>;
> +	clocks = <&clk81>;
> +};
> +
> diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
> new file mode 100644
> index 0000000..cf89894
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
> @@ -0,0 +1,16 @@
> +Amlogic Meson6 SoCs Timer Controller
> +
> +Required properties:
> +
> +- compatible : should be "amlogic,meson6-timer.txt"
> +- reg : Specifies base physical address and size of the registers.
> +- interrupts : The interrupt of the first timer
> +
> +Example:
> +
> +timer at c1109940 {
> +	compatible = "amlogic,meson6-timer";
> +	reg = <0xc1109940 0x14>;
> +	interrupts = <0 10 1>;
> +};
> +
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index ac7269f..5cf0618 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -14,6 +14,7 @@ allwinner	Allwinner Technology Co., Ltd.
>   altr	Altera Corp.
>   amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
>   amd	Advanced Micro Devices (AMD), Inc.
> +amlogic	Amlogic, Inc.
>   ams	AMS AG
>   amstaos	AMS-Taos Inc.
>   apm	Applied Micro Circuits Corporation (APM)
>

  reply	other threads:[~2014-08-18 10:36 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-17 10:49 [PATCH 0/7] ARM: meson: add preliminary support for MesonX/Meson6 SoCs Carlo Caione
2014-08-17 10:49 ` [PATCH 1/7] ARM: meson: debug: add debug UART for earlyprintk support Carlo Caione
2014-08-17 10:49 ` [PATCH 2/7] ARM: meson: serial: add MesonX SoC on-chip uart driver Carlo Caione
2014-08-28  7:51   ` Carlo Caione
2014-09-06 18:28   ` Carlo Caione
2014-09-06 18:38     ` Greg KH
2014-09-06 18:51       ` Carlo Caione
2014-08-17 10:49 ` [PATCH 3/7] ARM: meson6: clocksource: add Meson6 timer support Carlo Caione
2014-08-18 11:59   ` Matthias Brugger
2014-08-18 14:11     ` Carlo Caione
2014-08-18 16:27   ` Mark Rutland
2014-08-19 16:01     ` Carlo Caione
2014-08-17 10:49 ` [PATCH 4/7] ARM: meson: add basic support for MesonX SoCs Carlo Caione
2014-08-17 14:21   ` Maxime Ripard
2014-08-18 13:27     ` Carlo Caione
2014-08-18 15:10       ` Matthias Brugger
2014-08-18 19:11       ` Maxime Ripard
2014-08-17 10:49 ` [PATCH 5/7] ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS Carlo Caione
2014-08-17 14:42   ` Beniamino Galvani
2014-08-17 15:21     ` Carlo Caione
2014-08-18 16:15       ` Mark Rutland
2014-08-18 16:17   ` Mark Rutland
2014-08-19 16:16     ` Carlo Caione
2014-08-23 11:27   ` Andreas Färber
2014-08-17 10:49 ` [PATCH 6/7] ARM: meson: update defconfigs Carlo Caione
2014-08-18 10:31   ` Matthias Brugger
2014-08-18 13:31     ` Carlo Caione
2014-08-17 10:49 ` [PATCH 7/7] ARM: meson: update documentation (uart, timer and vendors) Carlo Caione
2014-08-18 10:36   ` Matthias Brugger [this message]
2014-08-18 13:33     ` Carlo Caione
2014-08-23 12:24   ` Andreas Färber
2014-08-17 14:29 ` [PATCH 0/7] ARM: meson: add preliminary support for MesonX/Meson6 SoCs Beniamino Galvani
2014-08-17 15:25   ` Carlo Caione

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53F1D73F.8010204@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).