From: marcin.jabrzyk@gmail.com (Marcin Jabrzyk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/11 v4] coresight: adding support for beagle and beagleXM
Date: Sun, 24 Aug 2014 23:38:29 +0200 [thread overview]
Message-ID: <53FA5B55.4000603@gmail.com> (raw)
In-Reply-To: <1408554231-24321-10-git-send-email-mathieu.poirier@linaro.org>
Hi,
W dniu 20.08.2014 o 19:03, mathieu.poirier at linaro.org pisze:
> From: Mathieu Poirier <mathieu.poirier@linaro.org>
>
> Currently supporting ETM and ETB. Support for TPIU
> and SDTI are yet to be added.
Did you tried running the drivers on board or are there any special
preparation needed?
I've BeagleBoard-xM Rev. C applied your patches and enabled the
functions the in menuconfig.
But on dmesg I see that:
[ 0.685028] of_amba_device_create(): amba_device_add() failed (-19)
for /etb at 5401b000
[ 0.685119] of_amba_device_create(): amba_device_add() failed (-19)
for /etm at 54010000
There are no nodes according coresight in /sys/kernel/debug/ .
Best regards,
Marcin
>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> ---
> arch/arm/boot/dts/omap3-beagle-xm.dts | 28 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/omap3-beagle.dts | 28 ++++++++++++++++++++++++++++
> 2 files changed, 56 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
> index 1becefc..eec73d8 100644
> --- a/arch/arm/boot/dts/omap3-beagle-xm.dts
> +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
> @@ -145,6 +145,34 @@
> };
> };
> };
> +
> + etb at 5401b000 {
> + compatible = "arm,coresight-etb10", "arm,primecell";
> + reg = <0x5401b000 0x1000>;
> +
> + coresight-default-sink;
> + clocks = <&emu_src_ck>;
> + clock-names = "apb_pclk";
> + port {
> + etb_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm_out>;
> + };
> + };
> + };
> +
> + etm at 54010000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x54010000 0x1000>;
> +
> + clocks = <&emu_src_ck>;
> + clock-names = "apb_pclk";
> + port {
> + etm_out: endpoint {
> + remote-endpoint = <&etb_in>;
> + };
> + };
> + };
> };
>
> &omap3_pmx_wkup {
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 3c3e6da..a151daf 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -140,6 +140,34 @@
> };
> };
> };
> +
> + etb at 540000000 {
> + compatible = "arm,coresight-etb10", "arm,primecell";
> + reg = <0x5401b000 0x1000>;
> +
> + coresight-default-sink;
> + clocks = <&emu_src_ck>;
> + clock-names = "apb_pclk";
> + port {
> + etb_in: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm_out>;
> + };
> + };
> + };
> +
> + etm at 54010000 {
> + compatible = "arm,coresight-etm3x", "arm,primecell";
> + reg = <0x54010000 0x1000>;
> +
> + clocks = <&emu_src_ck>;
> + clock-names = "apb_pclk";
> + port {
> + etm_out: endpoint {
> + remote-endpoint = <&etb_in>;
> + };
> + };
> + };
> };
>
> &omap3_pmx_wkup {
next prev parent reply other threads:[~2014-08-24 21:38 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-20 17:03 [PATCH 00/11 v4] Coresight framework and drivers mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 01/11 v4] coresight: add CoreSight core layer framework mathieu.poirier at linaro.org
2014-08-25 8:24 ` Thomas Petazzoni
2014-08-25 13:53 ` Mathieu Poirier
2014-08-20 17:03 ` [PATCH 02/11 v4] coresight-tmc: add CoreSight TMC driver mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 03/11 v4] coresight-tpiu: add CoreSight TPIU driver mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 04/11 v4] coresight-etb: add CoreSight ETB driver mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 05/11 v4] coresight-funnel: add CoreSight Funnel driver mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 06/11 v4] coresight-replicator: add CoreSight Replicator driver mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 07/11 v4] coresight-etm: add CoreSight ETM/PTM driver mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 08/11 v4] coresight: adding documentation for coresight mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 09/11 v4] coresight: adding support for beagle and beagleXM mathieu.poirier at linaro.org
2014-08-24 21:38 ` Marcin Jabrzyk [this message]
2014-08-25 14:02 ` Mathieu Poirier
2014-08-25 21:01 ` Marcin Jabrzyk
2014-08-20 17:03 ` [PATCH 10/11 v4] coresight: adding basic support for Vexpress TC2 mathieu.poirier at linaro.org
2014-08-20 17:03 ` [PATCH 11/11 v4] ARM: removing support for etb/etm in "arch/arm/kernel/" mathieu.poirier at linaro.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FA5B55.4000603@gmail.com \
--to=marcin.jabrzyk@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).