Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Wadim Egorov <w.egorov@phytec.de>
To: Nishanth Menon <nm@ti.com>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Siddharth Vadapalli <s-vadapalli@ti.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Bjorn Andersson <andersson@kernel.org>,
	alexander.sverdlin@siemens.com, jan.kiszka@siemens.com,
	ayush@beagleboard.org, robertcnelson@gmail.com,
	upstream@lists.phytec.de, francesco.dolcini@toradex.com,
	leonardo.costa@toradex.com, matthias.schiffer@ew.tq-group.com,
	stefano.r@variscite.com, eblanc@baylibre.com, msp@baylibre.com,
	thomas.richard@bootlin.com, miquel.raynal@bootlin.com,
	mwalle@kernel.org
Subject: Re: [PATCH] arm64: configs: defconfig: Convert TISCI to modules
Date: Fri, 20 Nov 2026 16:42:05 +0200	[thread overview]
Message-ID: <53d50a7c-4318-4705-ae21-780b04628742@phytec.de> (raw)
In-Reply-To: <20260910134409.1713610-1-nm@ti.com>



On 9/10/26 4:44 PM, Nishanth Menon wrote:
> Now that all relevant drivers have are ready, convert the
> TISCI drivers to modules. This impacts all K3 platforms for
> boot, recommendation (based on empirical evidence) is to use
> deferred_probe_timeout=60 in kernel command line to allow for driver
> probes to complete successfully based on the initrd used.
> 
> NET Savings: (Ubuntu Clang 23.0.0)
> ./scripts/bloat-o-meter vmlinux_previous vmlinux
> add/remove: 4/380 grow/shrink: 0/5 up/down: 32/-143248 (-143216)
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> 
> NOTE:
> a) This patch is based off v7.3-rc1 and will create a merge conflict
>   in linux-next (next-20260909), but the resolution is trivial (vs
>   bd94bea7165be450903c6d64bbcb4862e36798f9).
> b) Emperical experiments that Siddharth Vadapalli did,
>   it seems like some driver probes might be taking much
>   longer than the default deferred_probe_timeout of 10
>   seconds that is used when CONFIG_MODULES=y. Testing log[1]
>   a deferred_probe_timeout=60 seems to have worked fine.
> c) Full bloatometer report is available in [1] as well.
> d) related lore discussions[2]
> 
> [1] https://gist.github.com/nmenon/5f1587b373e6ca27170593010188d968
> [2] https://lore.kernel.org/all/20260429-defconfig-v2-5-e4ed4186028b@oss.qualcomm.com/
>     See headsup I gave on #linux-ti irc channel https://libera.catirclogs.org/linux-ti/2026-05-20
>     https://lore.kernel.org/linux-arm-kernel/20240821110054.35u5ubgaogzjv6c4@rover/
>     (original thread that triggered various changes)

I can't boot our boards anymore using the default defconfig. Is this forcing us to switch to an initramfs?


> 
> Cc: Siddharth Vadapalli <s-vadapalli@ti.com>
> Cc: Vignesh Raghavendra <vigneshr@ti.com>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: alexander.sverdlin@siemens.com
> Cc: jan.kiszka@siemens.com
> Cc: ayush@beagleboard.org
> Cc: robertcnelson@gmail.com
> Cc: upstream@lists.phytec.de
> Cc: francesco.dolcini@toradex.com
> Cc: leonardo.costa@toradex.com
> Cc: matthias.schiffer@ew.tq-group.com
> Cc: stefano.r@variscite.com
> Cc: eblanc@baylibre.com
> Cc: msp@baylibre.com
> Cc: thomas.richard@bootlin.com
> Cc: miquel.raynal@bootlin.com
> Cc: mwalle@kernel.org
> 
>  arch/arm64/configs/defconfig | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 6ec8d3a69c98..ed5aebf96080 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -267,6 +267,7 @@ CONFIG_RASPBERRYPI_FIRMWARE=y
>  CONFIG_INTEL_STRATIX10_SERVICE=y
>  CONFIG_INTEL_STRATIX10_RSU=m
>  CONFIG_MTK_ADSP_IPC=m
> +CONFIG_TI_SCI_PROTOCOL=m
>  CONFIG_GOOGLE_FIRMWARE=y
>  CONFIG_GOOGLE_CBMEM=m
>  CONFIG_GOOGLE_COREBOOT_TABLE=m
> @@ -1403,8 +1404,8 @@ CONFIG_DW_EDMA=m
>  CONFIG_RCAR_DMAC=y
>  CONFIG_RENESAS_USB_DMAC=m
>  CONFIG_RZ_DMAC=y
> -CONFIG_TI_K3_UDMA=y
> -CONFIG_TI_K3_UDMA_GLUE_LAYER=y
> +CONFIG_TI_K3_UDMA=m
> +CONFIG_TI_K3_UDMA_GLUE_LAYER=m
>  CONFIG_STM32_DMA3=m
>  CONFIG_DMABUF_HEAPS=y
>  CONFIG_DMABUF_HEAPS_SYSTEM=m
> @@ -1456,7 +1457,7 @@ CONFIG_CLK_IMX8QXP=y
>  CONFIG_CLK_IMX8ULP=y
>  CONFIG_CLK_IMX93=y
>  CONFIG_CLK_IMX95_BLK_CTL=y
> -CONFIG_TI_SCI_CLK=y
> +CONFIG_TI_SCI_CLK=m
>  CONFIG_COMMON_CLK_MT8192_AUDSYS=y
>  CONFIG_COMMON_CLK_MT8192_CAMSYS=y
>  CONFIG_COMMON_CLK_MT8192_IMGSYS=y
> @@ -1678,7 +1679,7 @@ CONFIG_QCOM_CPR=y
>  CONFIG_QCOM_RPMHPD=y
>  CONFIG_QCOM_RPMPD=y
>  CONFIG_ROCKCHIP_PM_DOMAINS=y
> -CONFIG_TI_SCI_PM_DOMAINS=y
> +CONFIG_TI_SCI_PM_DOMAINS=m
>  CONFIG_ARM_IMX_BUS_DEVFREQ=y
>  CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
>  CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
> @@ -1745,15 +1746,15 @@ CONFIG_SL28CPLD_INTC=y
>  CONFIG_XILINX_INTC=y
>  CONFIG_QCOM_PDC=y
>  CONFIG_QCOM_MPM=y
> -CONFIG_TI_SCI_INTR_IRQCHIP=y
> -CONFIG_TI_SCI_INTA_IRQCHIP=y
> +CONFIG_TI_SCI_INTR_IRQCHIP=m
> +CONFIG_TI_SCI_INTA_IRQCHIP=m
>  CONFIG_RESET_GPIO=m
>  CONFIG_RESET_IMX7=y
>  CONFIG_RESET_QCOM_AOSS=y
>  CONFIG_RESET_QCOM_PDC=m
>  CONFIG_RESET_RZG2L_USBPHY_CTRL=y
>  CONFIG_RESET_RZV2H_USB2PHY=m
> -CONFIG_RESET_TI_SCI=y
> +CONFIG_RESET_TI_SCI=m
>  CONFIG_PHY_CAN_TRANSCEIVER=m
>  CONFIG_PHY_NXP_PTN3222=m
>  CONFIG_PHY_SNPS_EUSB2=m



  parent reply	other threads:[~2026-11-20 14:42 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-10 13:44 [PATCH] arm64: configs: defconfig: Convert TISCI to modules Nishanth Menon
2026-09-22 14:24 ` Nishanth Menon
2026-09-24 17:00 ` Thomas Richard
2026-10-13 15:37 ` Mark Brown
2026-11-20 14:42 ` Wadim Egorov [this message]
2026-11-20 15:28   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53d50a7c-4318-4705-ae21-780b04628742@phytec.de \
    --to=w.egorov@phytec.de \
    --cc=alexander.sverdlin@siemens.com \
    --cc=andersson@kernel.org \
    --cc=ayush@beagleboard.org \
    --cc=catalin.marinas@arm.com \
    --cc=eblanc@baylibre.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=geert+renesas@glider.be \
    --cc=jan.kiszka@siemens.com \
    --cc=krzk@kernel.org \
    --cc=leonardo.costa@toradex.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=matthias.schiffer@ew.tq-group.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=msp@baylibre.com \
    --cc=mwalle@kernel.org \
    --cc=nm@ti.com \
    --cc=robertcnelson@gmail.com \
    --cc=s-vadapalli@ti.com \
    --cc=stefano.r@variscite.com \
    --cc=thomas.richard@bootlin.com \
    --cc=upstream@lists.phytec.de \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox