From: dinguyen@opensource.altera.com (Dinh Nguyen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv10 2/2] arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries.
Date: Tue, 2 Sep 2014 21:30:00 -0500 [thread overview]
Message-ID: <54067D28.20408@opensource.altera.com> (raw)
In-Reply-To: <1407770293-27190-3-git-send-email-tthayer@opensource.altera.com>
Hi DTS maintainers,
If possible, can I please get an Acked-by for this patch?
Many thanks...
Dinh
On 8/11/14, 10:18 AM, tthayer at opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
>
> Add the Altera SDRAM EDAC bindings and device tree changes to the Altera SoC project.
>
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> v2: Changes to SoC SDRAM EDAC code.
>
> v3: Implement code suggestions for SDRAM EDAC code.
>
> v4: Remove syscon from SDRAM controller bindings.
>
> v5: No Change, bump version for consistency.
>
> v6: Only map the ctrlcfg register as syscon.
>
> v7: No change. Bump for consistency.
>
> v8: No change. Bump for consistency.
>
> v9: Changes to support a MFD SDRAM controller with nested EDAC.
>
> v10: Revert to using syscon based on feedback.
> ---
> .../bindings/arm/altera/socfpga-sdram-edac.txt | 15 +++++++++++++++
> arch/arm/boot/dts/socfpga.dtsi | 11 +++++++++++
> 2 files changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
> new file mode 100644
> index 0000000..d0ce01d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
> @@ -0,0 +1,15 @@
> +Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
> +The EDAC accesses a range of registers in the SDRAM controller.
> +
> +Required properties:
> +- compatible : should contain "altr,sdram-edac";
> +- altr,sdr-syscon : phandle of the sdr module
> +- interrupts : Should contain the SDRAM ECC IRQ in the
> + appropriate format for the IRQ controller.
> +
> +Example:
> + sdramedac {
> + compatible = "altr,sdram-edac";
> + altr,sdr-syscon = <&sdr>;
> + interrupts = <0 39 4>;
> + };
> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> index 4676f25..45b361e 100644
> --- a/arch/arm/boot/dts/socfpga.dtsi
> +++ b/arch/arm/boot/dts/socfpga.dtsi
> @@ -603,6 +603,17 @@
> };
> };
>
> + sdr: sdr at ffc25000 {
> + compatible = "syscon";
> + reg = <0xffc25000 0x1000>;
> + };
> +
> + sdramedac {
> + compatible = "altr,sdram-edac";
> + altr,sdr-syscon = <&sdr>;
> + interrupts = <0 39 4>;
> + };
> +
> L2: l2-cache at fffef000 {
> compatible = "arm,pl310-cache";
> reg = <0xfffef000 0x1000>;
>
prev parent reply other threads:[~2014-09-03 2:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 15:18 [PATCHv10 0/2] Addition of Altera EDAC support tthayer at opensource.altera.com
2014-08-11 15:18 ` [PATCHv10 1/2] edac: altera: Add Altera SDRAM " tthayer at opensource.altera.com
2014-08-14 18:49 ` Pavel Machek
2014-08-26 18:38 ` Thor Thayer
2014-08-29 16:02 ` Borislav Petkov
2014-09-04 18:56 ` Dinh Nguyen
2014-08-11 15:18 ` [PATCHv10 2/2] arm: dts: Add Altera SDRAM EDAC bindings & devicetree entries tthayer at opensource.altera.com
2014-08-14 18:49 ` Pavel Machek
2014-08-26 18:39 ` Thor Thayer
2014-08-26 20:28 ` Dinh Nguyen
2014-08-26 21:25 ` Dinh Nguyen
2014-08-27 6:36 ` Borislav Petkov
2014-08-27 13:06 ` Dinh Nguyen
2014-08-15 6:42 ` Steffen Trumtrar
2014-08-15 16:07 ` atull
2014-08-15 16:41 ` Steffen Trumtrar
2014-08-15 16:47 ` Thor Thayer
2014-08-15 16:54 ` Steffen Trumtrar
2014-09-03 2:30 ` Dinh Nguyen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54067D28.20408@opensource.altera.com \
--to=dinguyen@opensource.altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).