From: d.lavnikevich@sam-solutions.net (Dmitry Lavnikevich)
To: linux-arm-kernel@lists.infradead.org
Subject: [alsa-devel] [PATCH v2 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
Date: Mon, 15 Sep 2014 15:07:02 +0300 [thread overview]
Message-ID: <5416D666.2050302@sam-solutions.net> (raw)
In-Reply-To: <CAOMZO5C9_XwgcLvVWvxB1A306_Ehm17ZE111j6d+7MhudAhT0g@mail.gmail.com>
On 12/09/14 19:40, Fabio Estevam wrote:
> On Fri, Sep 12, 2014 at 1:26 PM, Alexander Shiyan <shc_work@mail.ru> wrote:
>> Fri, 12 Sep 2014 19:04:30 +0300 ?? Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>:
>>> Audio on phyFLEX boards is presented by tlv320aic3007 codec connected
>>> over SSI interface.
>>>
>>> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
>>> ---
>> ...
>>> +&ssi2 {
>>> + fsl,mode = "i2s-slave";
>>> + status = "okay";
>>> + #sound-dai-cells = <0>;
>>> +};
>> I have already sent patch to add "#sound-dai-cells" into all i.MX DT-files.
>> Shawn, can you point us to this tree/commit?
> https://git.kernel.org/cgit/linux/kernel/git/shawnguo/linux.git/commit/?h=for-next&id=36c7e8826cf32dd4dd34c71b526653b800414355
So should I base my next patchset on for-next branch of
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
?
next prev parent reply other threads:[~2014-09-15 12:07 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 13:46 [PATCH 0/5] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 1/5] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-11 8:47 ` Philipp Zabel
2014-09-12 15:55 ` Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 2/5] ASoC: fsl: add imx-tlv320aic3x machine driver Dmitry Lavnikevich
2014-09-10 14:19 ` Lothar Waßmann
2014-09-10 14:27 ` [alsa-devel] " Markus Pargmann
2014-09-10 18:14 ` Nicolin Chen
2014-09-11 6:40 ` Markus Pargmann
2014-09-11 12:41 ` Dmitry Lavnikevich
2014-09-10 18:07 ` Nicolin Chen
2014-09-10 13:46 ` [PATCH 3/5] ARM: imx_v6_v7_defconfig: enable imx-tlv320aic3x by default Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 4/5] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 5/5] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 0/5] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-12 16:14 ` Alexander Shiyan
2014-09-15 12:04 ` Dmitry Lavnikevich
2014-09-12 16:26 ` Alexander Shiyan
2014-09-12 16:40 ` [alsa-devel] " Fabio Estevam
2014-09-15 12:07 ` Dmitry Lavnikevich [this message]
2014-09-16 1:46 ` Shawn Guo
2014-09-12 16:04 ` [PATCH v2 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x and simple-audio-card by default Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 0/4] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-10-01 12:11 ` Fabio Estevam
2014-10-01 13:40 ` Dmitry Lavnikevich
2014-10-01 13:45 ` Fabio Estevam
2014-10-01 13:52 ` Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-09-16 8:09 ` [PATCH v3 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 0/4] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-10-03 15:08 ` Mark Brown
2014-10-03 15:22 ` Dmitry Lavnikevich
2014-10-22 9:08 ` [PATCH v4 0/3 RESEND] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-22 9:08 ` [PATCH v4 RESEND 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-10-22 9:11 ` [PATCH v4 RESEND 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-10-22 9:12 ` [PATCH v4 RESEND 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5416D666.2050302@sam-solutions.net \
--to=d.lavnikevich@sam-solutions.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).