From: linux@roeck-us.net (Guenter Roeck)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] pinctrl: qcom: use restart_notifier mechanism for ps_hold
Date: Thu, 18 Sep 2014 20:34:41 -0700 [thread overview]
Message-ID: <541BA451.9010508@roeck-us.net> (raw)
In-Reply-To: <541B9ADA.2070107@roeck-us.net>
On 09/18/2014 07:54 PM, Guenter Roeck wrote:
> On 09/18/2014 03:32 PM, Josh Cartwright wrote:
>> By converting to the restart_notifier mechanism for restart, we allow
>> for other mechanisms, like the watchdog, to be used for restart in the
>> case where PS_HOLD has failed to reset the chip.
>>
>> Choose priority 128, as according to documentation, this mechanism "is
>> sufficient to restart the entire system".
>>
>> Cc: Pramod Gurav <pramod.gurav@smartplayin.com>
>> Cc: Guenter Roeck <linux@roeck-us.net>
>> Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
>> ---
>> drivers/pinctrl/qcom/pinctrl-msm.c | 38 ++++++++++++++++++++++++++------------
>> 1 file changed, 26 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
>> index d5ed127..9fced3b 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
>> @@ -27,8 +27,7 @@
>> #include <linux/gpio.h>
>> #include <linux/interrupt.h>
>> #include <linux/spinlock.h>
>> -
>> -#include <asm/system_misc.h>
>> +#include <linux/reboot.h>
>>
>> #include "../core.h"
>> #include "../pinconf.h"
>> @@ -43,6 +42,7 @@
>> * @dev: device handle.
>> * @pctrl: pinctrl handle.
>> * @chip: gpiochip handle.
>> + * @restart_nb: restart notifier block.
>> * @irq: parent irq for the TLMM irq_chip.
>> * @lock: Spinlock to protect register resources as well
>> * as msm_pinctrl data structures.
>> @@ -56,6 +56,7 @@ struct msm_pinctrl {
>> struct device *dev;
>> struct pinctrl_dev *pctrl;
>> struct gpio_chip chip;
>> + struct notifier_block restart_nb;
>> int irq;
>>
>> spinlock_t lock;
>> @@ -852,13 +853,14 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
>> return 0;
>> }
>>
>> -#ifdef CONFIG_ARM
>
> Unrelated to this patch, but is this going to be executed (and potentially used)
> on any non-arm architectures ?
>
> Reason for asking that the restart handler mechanism is currently only
> implemented on arm and arm64. If it is going to be used with other
> architectures, we'll have to add the necessary call into the architecture
> restart code.
>
>> -static void __iomem *msm_ps_hold;
>> -
>> -static void msm_reset(enum reboot_mode reboot_mode, const char *cmd)
>> +static int msm_ps_hold_restart(struct notifier_block *nb, unsigned long action,
>> + void *data)
>> {
>> - writel(0, msm_ps_hold);
>> + struct msm_pinctrl *pctrl = container_of(nb, struct msm_pinctrl, restart_nb);
>> +
>> + writel(0, pctrl->regs + PS_HOLD_OFFSET);
>> mdelay(10000);
>
> Sure you still want to wait for 10 seconds here ?
> Would it make sense to choose a more reasonable timeout ?
>
> Thanks,
> Guenter
>
>> + return NOTIFY_DONE;
>> }
>>
>> static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
>> @@ -868,13 +870,16 @@ static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
>>
>> for (; i <= pctrl->soc->nfunctions; i++)
>> if (!strcmp(func[i].name, "ps_hold")) {
>> - msm_ps_hold = pctrl->regs + PS_HOLD_OFFSET;
>> - arm_pm_restart = msm_reset;
>> + pctrl->restart_nb.notifier_call = msm_ps_hold_restart;
>> + pctrl->restart_nb.priority = 128;
>> + if (register_restart_handler(&pctrl->restart_nb)) {
>> + dev_err(pctrl->dev,
>> + "failed to setup restart handler.\n");
>> + pctrl->restart_nb.notifier_call = NULL;
>> + }
>> + break;
>> }
>> }
>> -#else
>> -static void msm_pinctrl_setup_pm_reset(const struct msm_pinctrl *pctrl) {}
>> -#endif
>>
>> int msm_pinctrl_probe(struct platform_device *pdev,
>> const struct msm_pinctrl_soc_data *soc_data)
>> @@ -943,6 +948,15 @@ int msm_pinctrl_remove(struct platform_device *pdev)
>>
>> pinctrl_unregister(pctrl->pctrl);
>>
>> + if (pctrl->restart_nb.notifier_call) {
One more comment: The conditional is really unnecessary. Just let
unregister_restart_handler deal with it ...
>> + ret = unregister_restart_handler(&pctrl->restart_nb);
and just ignore the error return. The function will only return an error
if the entry was not found, and then it is a don't care.
Thanks,
Guenter
>> + if (ret) {
>> + dev_err(&pdev->dev,
>> + "unable to unregister restart handler\n");
>> + return ret;
>> + }
>> + }
>> +
>> return 0;
>> }
>> EXPORT_SYMBOL(msm_pinctrl_remove);
>>
>
next prev parent reply other threads:[~2014-09-19 3:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-18 22:32 [PATCH] pinctrl: qcom: use restart_notifier mechanism for ps_hold Josh Cartwright
2014-09-18 22:47 ` Kumar Gala
2014-09-18 22:49 ` Josh Cartwright
2014-09-18 23:02 ` Kumar Gala
2014-09-19 2:54 ` Guenter Roeck
2014-09-19 3:34 ` Guenter Roeck [this message]
2014-09-19 15:19 ` Josh Cartwright
2014-09-19 15:09 ` Josh Cartwright
2014-09-19 12:28 ` Pramod Gurav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=541BA451.9010508@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).