public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: kever.yang@rock-chips.com (Kever Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] clk: rockchip: add initcall to set clk defaults after syscons are available
Date: Mon, 22 Sep 2014 15:56:09 +0800	[thread overview]
Message-ID: <541FD619.3060108@rock-chips.com> (raw)
In-Reply-To: <1566610.B4NH8lpaoI@diego>

Heiko,

On 08/07/2014 08:57 PM, Heiko St?bner wrote:
> PLLs on Rockchip platforms report their locking state in an external
> register situated in the "General Register Files" which is provided
> through a syscon device.
>
> When the initial clk init runs, this syscon is of course not yet
> available, making it impossible to set PLLs to other frequencies
> through the assigned-rate property of the clock-controller node.
>
> Syscon devices are initialized through a postcore initcall, so add an
> arch_initcall to rerun the rockchip specific clock initalization when
> the GRF is available.
>
> As the clock init already runs two times (through of_clk_add_provider
> and of_clk_init), a third time shouldn't hurt to much and in the best
> case wouldn't change any settings at all.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>   drivers/clk/rockchip/clk.c | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
>
> diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c
> index 9a3adb1..e14b108 100644
> --- a/drivers/clk/rockchip/clk.c
> +++ b/drivers/clk/rockchip/clk.c
> @@ -23,6 +23,7 @@
>   #include <linux/slab.h>
>   #include <linux/clk.h>
>   #include <linux/clk-provider.h>
> +#include <linux/clk/clk-conf.h>
>   #include <linux/mfd/syscon.h>
>   #include <linux/regmap.h>
>   #include "clk.h"
> @@ -126,6 +127,18 @@ void __init rockchip_clk_init(struct device_node *np, void __iomem *base,
>   	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
>   }
>   
> +/**
> + * Set clock-defaults again, after grf regmap is available for PLLs.
> + */
> +static int __init rockchip_clk_set_defaults(void)
> +{
> +	if (cru_node)
> +		return of_clk_set_defaults(cru_node, true);
> +
> +	return 0;
> +}
> +arch_initcall(rockchip_clk_set_defaults);
> +
>   struct regmap *rockchip_clk_get_grf(void)
>   {
>   	if (IS_ERR(grf))
This patch works on my rk3288 evb, so,
Tested-by: Kever Yang <kever.yang@rock-chips.com>

  reply	other threads:[~2014-09-22  7:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-07 12:57 [PATCH] clk: rockchip: add initcall to set clk defaults after syscons are available Heiko Stübner
2014-09-22  7:56 ` Kever Yang [this message]
2014-09-24 20:21 ` Doug Anderson
2014-09-24 20:27   ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=541FD619.3060108@rock-chips.com \
    --to=kever.yang@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox