From: tomasz.figa@gmail.com (Tomasz Figa)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 0/6] cpufreq: use generic cpufreq drivers for exynos platforms
Date: Wed, 24 Sep 2014 13:08:37 +0200 [thread overview]
Message-ID: <5422A635.2020607@gmail.com> (raw)
In-Reply-To: <026501cfd7ca$0857a140$1906e3c0$@kernel.org>
On 24.09.2014 09:34, Kukjin Kim wrote:
> Thomas Abraham wrote:
>>
>> This patch series removes the use of Exynos4210 and Exynos5250 specific cpufreq
>> drivers and enables the use of cpufreq-cpu0 driver for these platforms. This
>> series also enables cpufreq support for Exynos5420 using arm_big_little cpufreq
>> driver.
>>
>> This patch series is dependent on two other patches
>> 1. ARM: dts: add CPU nodes for Exynos4 SoCs
>> - https://lkml.org/lkml/2014/7/21/315
>> 2. clk: exynos4: remove duplicate div_core2 divider clock instantiation
>> - http://www.mail-archive.com/linux-samsung-soc at vger.kernel.org/msg34859.html
I have applied 2) to Samsung clock tree.
>>
>> Thomas Abraham (6):
>> clk: samsung: add infrastructure to register cpu clocks
>> clk: samsung: add cpu clock configuration data and instantiate cpu clock
>> ARM: dts: Exynos: add CPU OPP and regulator supply property
>> ARM: Exynos: switch to using generic cpufreq driver for Exynos4210/5250/5420
>> cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support
>> clk: samsung: remove unused clock aliases and update clock flags
>>
>> arch/arm/boot/dts/exynos4210-origen.dts | 4 +
>> arch/arm/boot/dts/exynos4210-trats.dts | 4 +
>> arch/arm/boot/dts/exynos4210-universal_c210.dts | 4 +
>> arch/arm/boot/dts/exynos4210.dtsi | 14 +-
>> arch/arm/boot/dts/exynos5250-arndale.dts | 4 +
>> arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 +
>> arch/arm/boot/dts/exynos5250-snow.dts | 4 +
>> arch/arm/boot/dts/exynos5250.dtsi | 25 ++-
>> arch/arm/boot/dts/exynos5420.dtsi | 38 +++
>> arch/arm/mach-exynos/exynos.c | 24 ++-
>> drivers/clk/samsung/Makefile | 2 +-
>> drivers/clk/samsung/clk-cpu.c | 335 +++++++++++++++++++++++
>> drivers/clk/samsung/clk-cpu.h | 91 ++++++
>> drivers/clk/samsung/clk-exynos4.c | 63 +++--
>> drivers/clk/samsung/clk-exynos5250.c | 44 +++-
>> drivers/clk/samsung/clk-exynos5420.c | 72 +++++-
>> drivers/cpufreq/Kconfig.arm | 22 --
>> drivers/cpufreq/Makefile | 2 -
>> include/dt-bindings/clock/exynos5250.h | 1 +
>> include/dt-bindings/clock/exynos5420.h | 2 +
>
> Looks good to me,
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>
> BTW, who will handle this series? I think this is already ready for v3.18.
I believe Viresh already acked this series too and since it does quite a
lot of shuffling in clock code, I'd prefer to take this through clock
tree, but apparently there is a dependency on patch 1), which already
went through another tree?
Best regards,
Tomasz
next prev parent reply other threads:[~2014-09-24 11:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-24 3:57 [PATCH v10 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Thomas Abraham
2014-09-24 3:57 ` [PATCH v10 1/6] clk: samsung: add infrastructure to register cpu clocks Thomas Abraham
2014-09-24 3:57 ` [PATCH v10 2/6] clk: samsung: add cpu clock configuration data and instantiate cpu clock Thomas Abraham
2014-09-24 3:57 ` [PATCH v10 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property Thomas Abraham
2014-09-24 3:57 ` [PATCH v10 4/6] ARM: Exynos: switch to using generic cpufreq driver for Exynos4210/5250/5420 Thomas Abraham
2014-09-24 3:57 ` [PATCH v10 5/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support Thomas Abraham
2014-09-24 3:57 ` [PATCH v10 6/6] clk: samsung: remove unused clock aliases and update clock flags Thomas Abraham
2014-09-24 7:34 ` [PATCH v10 0/6] cpufreq: use generic cpufreq drivers for exynos platforms Kukjin Kim
2014-09-24 11:08 ` Tomasz Figa [this message]
2014-09-24 12:26 ` Thomas Abraham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5422A635.2020607@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).