From: afaerber@suse.de (Andreas Färber)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC
Date: Mon, 29 Sep 2014 16:55:25 +0200 [thread overview]
Message-ID: <542972DD.8020700@suse.de> (raw)
In-Reply-To: <1411991314-6636-3-git-send-email-zhang.lyra@gmail.com>
Hi,
Am 29.09.2014 um 13:48 schrieb zhang.lyra at gmail.com:
> From: "zhizhou.zhang" <zhizhou.zhang@spreadtrum.com>
>
> Adds the device tree support for Spreadtrum Shark64 SoC based on ARMv8 architecture.
>
> Signed-off-by: zhizhou.zhang <zhizhou.zhang@spreadtrum.com>
> Signed-off-by: chunyan.zhang <chunyan.zhang@spreadtrum.com>
> ---
> arch/arm64/boot/dts/sprd_shark64.dts | 110 ++++++++++++++++++++++++++++++++++
> 1 file changed, 110 insertions(+)
> create mode 100644 arch/arm64/boot/dts/sprd_shark64.dts
>
> diff --git a/arch/arm64/boot/dts/sprd_shark64.dts b/arch/arm64/boot/dts/sprd_shark64.dts
> new file mode 100644
> index 0000000..537cd6d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd_shark64.dts
> @@ -0,0 +1,110 @@
> +/*
> + * dts file for Spreadtrum(sprd) Shark64 SOC
> + *
> + * Copyright (C) 2014, Spreadtrum Communications Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/memreserve/ 0x80000000 0x00010000;
> +
> +/ {
> + model = "shark64 Board";
The commit message says SoC but here it says Board. Usually the SoC goes
into a .dtsi file that can then be reused for multiple boards (.dts).
Even if you only have one board for now, this distinction makes sense.
You can use status = "disabled"; to prepare nodes in the .dtsi and then
override the ones used via status = "okay"; in the .dts file. UARTs are
a typical example where you will see this pattern used.
> + compatible = "sprd,shark64";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen {
> + bootargs = "earlycon=serial_sprd,0x70000000";
> + };
Some spaces snuck into this line. ;)
Cheers,
Andreas
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x0 0x0>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x8000fff8>;
> + };
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x0 0x1>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x8000fff8>;
> + };
> + cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x0 0x2>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x8000fff8>;
> + };
> + cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x0 0x3>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x8000fff8>;
> + };
> + };
> +
> + memory at 80000000 {
> + device_type = "memory";
> + reg = <0 0x80000000 0 0x20000000>;
> + };
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + gic: interrupt-controller at 12001000 {
> + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0 0x12001000 0 0x1000>,
> + <0 0x12002000 0 0x1000>;
> + };
> +
> + intc:interrupt-controller at 71400000 {
> + compatible = "sprd,intc";
> + #interrupt-cells = <0>;
> + interrupt-controller;
> + reg = <0 0x71400000 0 0x1000>,
> + <0 0x71500000 0 0x1000>,
> + <0 0x71600000 0 0x1000>,
> + <0 0x71700000 0 0x1000>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xff01>,
> + <1 14 0xff01>,
> + <1 11 0xff01>,
> + <1 10 0xff01>;
> + clock-frequency = <26000000>;
> + };
> +
> + uart0: uart at 70000000 {
> + compatible = "sprd,serial";
> + reg = <0 0x70000000 0 0x100>;
> + interrupts = <0 2 0xf04>;
> + };
> +
> + uart1: uart at 70100000 {
> + compatible = "sprd,serial";
> + reg = <0 0x70100000 0 0x100>;
> + interrupts = <0 3 0xf04>;
> + };
> +};
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg
next prev parent reply other threads:[~2014-09-29 14:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-29 11:48 [PATCH 0/6] Add Spreadtrum Shark64 SoC support zhang.lyra at gmail.com
2014-09-29 11:48 ` [PATCH 1/6] Documentation: DT: Add bindings for Spreadtrum serial zhang.lyra at gmail.com
2014-09-29 11:48 ` [PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC zhang.lyra at gmail.com
2014-09-29 14:55 ` Andreas Färber [this message]
2014-09-29 11:48 ` [PATCH 3/6] arm64: dts/Makefile: Add " zhang.lyra at gmail.com
2014-09-29 14:46 ` Andreas Färber
2014-09-29 11:48 ` [PATCH 4/6] arm64: Add support for Spreadtrum's Shark64 SoC in Kconfig and defconfig zhang.lyra at gmail.com
2014-09-29 11:48 ` [PATCH 5/6] tty/serial: Add Spreadtrum's serial earlycon zhang.lyra at gmail.com
2014-09-29 11:48 ` [PATCH 6/6] Documentation: Add entry for Spreadtrum's Shark64 SoC zhang.lyra at gmail.com
-- strict thread matches above, loose matches on Subject: below --
2014-09-29 12:04 [PATCH 0/6] Add Spreadtrum Shark64 SoC support zhang.lyra at gmail.com
2014-09-29 12:04 ` [PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC zhang.lyra at gmail.com
2014-09-29 13:47 ` Arnd Bergmann
2014-10-01 11:17 ` Catalin Marinas
2014-10-15 3:17 ` Lyra Zhang
2014-10-20 19:00 ` Arnd Bergmann
2014-10-21 1:28 ` Lyra Zhang
2014-10-01 11:23 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542972DD.8020700@suse.de \
--to=afaerber@suse.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).