From: d.lavnikevich@sam-solutions.com (Dmitry Lavnikevich)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 4/4] ASoC: tlv320aic3x: fix PLL D configuration
Date: Fri, 3 Oct 2014 18:22:38 +0300 [thread overview]
Message-ID: <542EBF3E.8020106@sam-solutions.com> (raw)
In-Reply-To: <20141003150807.GD24441@sirena.org.uk>
On 03/10/14 18:08, Mark Brown wrote:
> On Fri, Oct 03, 2014 at 04:18:56PM +0300, Dmitry Lavnikevich wrote:
>> Current caching implementation during regcache_sync() call bypasses
>> all register writes of values that are already known as default
>> (regmap reg_defaults). Same time in TLV320AIC3x codecs register 5
>
> Applied, thanks. This should really have been sent separately to the
> other patches - it's not in any way specific to the board and there's no
> dependency in either direction.
Thanks. You are right, I didn't thought about it. Will remember for later :)
next prev parent reply other threads:[~2014-10-03 15:22 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-10 13:46 [PATCH 0/5] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 1/5] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-11 8:47 ` Philipp Zabel
2014-09-12 15:55 ` Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 2/5] ASoC: fsl: add imx-tlv320aic3x machine driver Dmitry Lavnikevich
2014-09-10 14:19 ` Lothar Waßmann
2014-09-10 14:27 ` [alsa-devel] " Markus Pargmann
2014-09-10 18:14 ` Nicolin Chen
2014-09-11 6:40 ` Markus Pargmann
2014-09-11 12:41 ` Dmitry Lavnikevich
2014-09-10 18:07 ` Nicolin Chen
2014-09-10 13:46 ` [PATCH 3/5] ARM: imx_v6_v7_defconfig: enable imx-tlv320aic3x by default Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 4/5] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-10 13:46 ` [PATCH 5/5] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 0/5] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-09-12 16:14 ` Alexander Shiyan
2014-09-15 12:04 ` Dmitry Lavnikevich
2014-09-12 16:26 ` Alexander Shiyan
2014-09-12 16:40 ` [alsa-devel] " Fabio Estevam
2014-09-15 12:07 ` Dmitry Lavnikevich
2014-09-16 1:46 ` Shawn Guo
2014-09-12 16:04 ` [PATCH v2 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x and simple-audio-card by default Dmitry Lavnikevich
2014-09-12 16:04 ` [PATCH v2 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 0/4] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-10-01 12:11 ` Fabio Estevam
2014-10-01 13:40 ` Dmitry Lavnikevich
2014-10-01 13:45 ` Fabio Estevam
2014-10-01 13:52 ` Dmitry Lavnikevich
2014-09-16 8:08 ` [PATCH v3 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-09-16 8:09 ` [PATCH v3 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 0/4] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-10-03 13:18 ` [PATCH v4 4/4] ASoC: tlv320aic3x: fix PLL D configuration Dmitry Lavnikevich
2014-10-03 15:08 ` Mark Brown
2014-10-03 15:22 ` Dmitry Lavnikevich [this message]
2014-10-22 9:08 ` [PATCH v4 0/3 RESEND] Add Phytec pbab01 audio support Dmitry Lavnikevich
2014-10-22 9:08 ` [PATCH v4 RESEND 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02 Dmitry Lavnikevich
2014-10-22 9:11 ` [PATCH v4 RESEND 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default Dmitry Lavnikevich
2014-10-22 9:12 ` [PATCH v4 RESEND 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards Dmitry Lavnikevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=542EBF3E.8020106@sam-solutions.com \
--to=d.lavnikevich@sam-solutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).